Assuming a compatible driver exists:
act-ir2012ul_driver_v1.0.exe)..inf file for the ACT-IR2012UL.Verification: The device should appear under “Infrared devices” or “Universal Serial Bus devices” without error flags.
Product: ACT-IR2012UL (Infrared USB Dongle / Receiver) Issue: Driver identification and setup for legacy operating systems.
Due to age and lack of modern drivers, consider replacing the ACT-IR2012UL with:
ACT-IR2012UL is a high-speed USB-to-IrDA (Infrared) adapter from ACTiSYS Corporation. It is primarily used for bidirectional communication between a PC and medical devices, such as Automated External Defibrillators (AEDs). Driver Compatibility & Installation
Operating Systems: The device officially supports Windows 98SE through Windows 11, including 64-bit versions and Windows Server 2003.
Windows 10/11 Support: While listed as compatible, standard Windows 10/11 drivers may require a "workaround solution." Users are encouraged to email ACTiSYS Tech Support for the specific Windows 10/11 workaround.
Mac OS: There are known issues with the Mac OS IrDA stack. It is highly recommended to contact support before attempting to use the device with Mac.
Automatic Installation: For supported legacy systems, the installer typically runs from a driver CD and completes without user action before you plug in the dongle. Key Benefits Speed: Supports full IrDA speeds from 9.6K to 4M bps. Performance: Users have reported that the ACT-IR2012UL
is 5 to 7 times faster for medical device applications compared to older models like the ACT-IR2002UL.
Bidirectional Support: Unlike some legacy adapters that only allow data downloads, this model supports both uploading configuration data and downloading logs. Troubleshooting & Tips
BIOS Settings: Ensure that the computer's USB port is enabled in the BIOS settings before use.
Verification: After installation, the device should appear under Infrared devices in the Windows Device Manager.
IrComm/OBEX: The adapter supports Windows 7 through 11 (32- and 64-bit) specifically for IrDA-OBEX applications.
For long-term reliability in environments where future OS support for IrDA may be uncertain, the manufacturer also recommends the ACT-IR100UDv3-XX as a stable alternative. ACT-IR2012UL - ACTiSYS Corporation
ACT-IR2012UL driver — concise review
Overview
Compatibility
Driver quality
Community support and tooling
Common issues
Recommendations
If you want, I can:
(Invoking related search suggestions...)
ACT-IR2012UL is a high-speed Very Fast Infrared (VFIR) USB adapter manufactured by ACTiSYS Corporation
. It is primarily used for bidirectional wireless data exchange between PCs and industrial or medical devices. Driver Support and Installation
For modern operating systems, the driver situation for the ACT-IR2012UL varies by Windows version: Windows 7 and Older
: Features "Plug-and-Play" support using native Windows drivers. Windows 10 & 11
: While generally compatible, some users require a specific workaround or the "TSPack" driver for full functionality. ACTiSYS directs users to contact their technical support at tech-support@actisys.com to receive the specific file or workaround solution for these versions. Legacy Systems
: Supports Windows 98SE, Me, 2000, XP, Vista, and Server 2003 (both 32 and 64-bit). Alternative OS
: Compatible with Win CE 4.2/5.0, Linux, and Mac (though Mac may have IrDA stack issues). Technical Specifications act-ir2012ul driver
The ACT-IR2012UL is designed for high-throughput applications, offering significantly faster data transfer than older models like the ACT-IR2002UL. jacobi ceos Specification Data Rates SIR (9.6k–115.2k bps), MIR (1.152M bps), FIR (4M bps), VFIR (16M bps) 1 cm to 158 cm for SIR; 1 cm to 100 cm for FIR/VFIR
USB 3.0 compliant (backward compatible with 2.0/1.1); IrDA 1.4 compliant USB-powered (5V); active current < 400 mA; standby < 0.5 mA Compatibility
Bidirectional communication for data logging, synchronization, and file transfer Practical Considerations Application
: Often used with medical equipment like Automated External Defibrillators (AEDs) to download or upload configuration data. IrComm Issues
: For applications requiring IrComm, a 3rd-party software like
may be needed for 32-bit Windows, though it does not support 64-bit. EOL Warning
ACT-IR2012UL is a high-speed USB-to-IrDA adapter used for wireless data transfer between PCs and IrDA-enabled devices like data loggers, PDAs, and industrial instruments. ACT-IR2012UL Driver Support Windows 7 & Older : The adapter features Plug-and-Play (PnP) support using native Windows drivers. Windows 10 & 11
: While compatible, these operating systems may require a manual driver installation using the TSPack driver from ACTiSYS. Legacy Hardware Note
: Older units may contain an EOL (End-of-Life) IC that does not support Windows 10. If your serial number indicates an older model, you may need a newer adapter. How to Obtain the Driver
ACTiSYS typically does not provide direct public download links for the latest Windows 10/11 drivers. To get the correct driver for your specific hardware version: Locate Serial Number : Check the physical label on your IR adapter. Contact Support : Email the ACTiSYS technical support team at tech-support@actisys.com to request the updated TSPack driver or a workaround solution. Manual Installation : If you have the driver files, go to Device Manager
, right-click the device, and select "Browse my computer for driver software" to point to the unzipped driver directory. Product Features
: Supports SIR (9.6k–115.2kbps), MIR (1.152Mbps), FIR (4Mbps), and VFIR (16Mbps).
: Draws power directly from the USB port; no external supply needed. Compatibility
: Works with any IrDA-capable notebook, printer, or medical/industrial instrument. ACT-IR2012UL - ACTiSYS Corporation
The ACT-IR2012UL is a USB-to-Infrared (IrDA) adapter designed to enable wireless data communication between a PC and IrDA-compliant devices. Its drivers and features focus on maintaining legacy data transfer standards on modern operating systems. Key Features and Specifications
IrDA Compliance: Fully supports IrDA physical layer specifications, allowing communication with devices like industrial data loggers, heart rate monitors, and older handheld PCs.
Plug-and-Play: Utilizes a standard USB interface, typically recognized as a Virtual COM Port (VCP) after driver installation.
Data Rates: Supports standard IrDA speeds, typically ranging from 9.6 Kbps to 115.2 Kbps (SIR mode).
OS Compatibility: Drivers are primarily designed to bridge the gap for Windows versions that no longer natively support IrDA (such as Windows 10 and 11), often requiring specialized software stacks like the ACTiSYS IrDA USB Driver.
Bus-Powered: Draws power directly from the USB port, requiring no external power supply. Driver Functionality
The driver functions by emulating a serial port, which allows legacy software to "talk" to the infrared hardware as if it were connected via a traditional RS-232 cable. This is critical for proprietary industrial or medical software that relies on fixed COM port communication. AI responses may include mistakes. Learn more
Title: The Ghost in the Legacy Port
The rain in Neo-Veridia didn’t touch the ground; it sizzled against the energy shields surrounding the high-rises. Inside a cramped, climate-controlled server room on the 44th floor, Elias stared at a monitor displaying a single, blinking error message: DEVICE NOT RECOGNIZED.
Elias was a "Digital Archaeologist." When the Cloud collapsed in '28, corporations realized they had terabytes of critical data trapped on physical, air-gapped hardware. His job was to bridge the gap between the sleek, wireless present and the clumsy, wired past.
On the steel table sat the objective: an ACT-IR2012UL.
It was a beast of a legacy tech—a Serial-to-USB converter box, matte black, heavy as a brick, and covered in dust. It looked like a relic from a bygone war. Next to it lay the prize: a hardened tactical drive from a pre-war security drone.
"I need the driver, Eli," said a voice from the doorway. It was Kira, his client. She was high-ranking security, impatient and dangerous. "The drone's black box logs are on that drive. We need to know why it went rogue."
"I can't just plug it in, Kira," Elias muttered, typing furiously on a secondary terminal detached from the main net. "The ACT-IR2012UL isn't plug-and-play with modern quantum kernels. The operating system sees it as a threat. It treats the handshake protocol like a virus."
"So fix it."
"It’s not that simple. The manufacturer, Actisys, went under decades ago. The digital certificates are rotting. I need the source. The specific driver file." The Ultimate Guide to the ACT-IR2012UL Driver: Installation,
Elias wasn't looking for just any file. He was hunting for the ACT-IR2012UL Driver v3.0.1. It was the "Holy Grail" patch—the only version that successfully translated the chaotic baud rates of the old drone hardware into the structured logic of modern systems.
He navigated the "Shadow Archives"—an illicit, decentralized network of mirrored servers maintained by purists. He filtered through mountains of corrupted data. IR2012UL.zip... Corrupted. IR2012UL.exe... Trojan detected. IR2012UL.inf... Incomplete.
"Come on," Elias whispered, sweat beading on his forehead. The ACT-IR2012UL sat inert on the desk, a plastic coffin. Without the driver, it was a paperweight. With it, it was a skeleton key.
He found it buried in a forgotten sub-directory of a university server that had been offline for fifteen years. actiseng.sys. The kernel-level driver.
"Downloading," he breathed. The progress bar crawled. 40%... 60%...
"What is taking so long?" Kira stepped closer, the hum of her cybernetic arm rising in pitch.
"The architecture is different," Elias explained, his voice tight. "The IR2012UL relies on a specific FTDI chipset communication style. Modern OS architecture blocks the interrupt requests. I have to install this driver in 'Legacy Compatibility Mode,' then trick the kernel into thinking the USB 3.0 port is actually an old-school RS-232 serial port."
"English, Elias."
"I have to teach the computer to speak a dead language."
The download completed. Elias dragged the file into his deployment tool. He took a deep breath and plugged the USB cable of the ACT-IR2012UL into his interface deck.
Boop.
The sound was jarring in the silent room. The red LED on the converter box flickered, then turned a solid, angry green. The computer froze.
"Is it crashing?" Kira asked, her hand hovering over her weapon.
"No," Elias said, watching the command prompt. "It’s negotiating."
The screen scrolled lines of code. The driver was wrestling with the OS. It was demanding memory addresses the modern system wasn't willing to give up. Elias intervened, manually allocating the I/O range.
PORT: COM3 ASSIGNED.
BAUD RATE: 115200.
HANDSHAKE: SUCCESSFUL.
The red error message vanished. In its place, a plain gray window appeared—the interface for the drone's hard drive.
"Driver installed," Elias exhaled, slumping back. "The ACT-IR2012UL is live. We have a bridge."
Kira moved to the screen, her eyes scanning the cascading logs of the rogue drone. "There," she pointed. "The command logs. It didn't go rogue. It was hacked. The signal came from inside the corporation."
Elias looked at the humble black box on his desk. The ACT-IR2012UL. A piece of plastic and silicon from a forgotten era. It had no AI, no cloud connectivity, no flash. But for the last five minutes, it had held the weight of the city's history in its circuits, translating the secrets of the dead to the ears of the living.
"Good work," Kira said, pulling a drive from the terminal.
"Keep the hardware," Elias said, unplugging the device. The light died, and the box returned to being just another artifact. "But if you ever need to talk to the past again... you know where to find the driver."
The ACT-IR2012UL Go to product viewer dialog for this item. is a high-speed USB-to-IrDA adapter used to add wireless infrared communication to modern PCs for tasks like data logging and file transfers. While Windows 7 and older systems often support it via "Plug-and-Play" native drivers, newer operating systems like Windows 10 and 11 require specific attention due to changes in how Windows handles infrared protocols. Driver Installation for Windows 10 & 11
Modern versions of Windows (10/11) may not automatically install the correct drivers for this device.
Manual Installation: If the device isn't recognized, you likely need the TSPack driver manually.
Workaround Solution: The manufacturer, ACTiSYS Corporation, provides a specific workaround solution for 32-bit and 64-bit Windows 10/11 systems via their technical support team at tech-support@actisys.com.
Legacy Hardware: Be aware that some older units use an EOL (End of Life) chip that may not be compatible with Windows 10; this is verified by the device's serial number. Key Specifications & Features
Operating Systems: Supports Windows 98SE through Windows 11, including Windows Server 2003.
Transfer Speeds: Supports full IrDA speeds including SIR (9.6Kbps), FIR (4Mbps), and VFIR (16Mbps).
Connectivity: Uses a standard USB port (compliant with USB 3.0) and does not require external power. Download the driver package (e
Compatibility: Designed for synchronization with PDAs, medical instruments, data terminals, and IrDA-capable printers. Troubleshooting Common Issues
IrComm/OBEX: For Windows 10/11 users, the adapter specifically supports IrDA-OBEX for file transfers.
Port Conflicts: Unlike older serial adapters, the IR2012UL does not occupy COM or Parallel ports, avoiding traditional IRQ/DMA resource conflicts.
BIOS Settings: If the device still fails to communicate, check your computer's BIOS settings to ensure integrated infrared features aren't causing a hardware conflict.
For further assistance, retailers like JACOBI SHOP or Radwell International provide additional documentation and support for industrial applications. If you need help with the installation, let me know: Which Windows version are you using?
Do you have the TSPack installer already, or do you need help finding the download?
Are you trying to connect a specific device (like a heart rate monitor or industrial logger)?
USB IrDA FIR Infrared Adapter - ACT-IR2012UL - jacobi c.e.o.s.
To install and configure the ACTiSYS ACT-IR2012UL USB-IrDA adapter, follow this guide covering driver acquisition, system compatibility, and specific use cases like IrComm. 1. Driver Acquisition
Official drivers for the ACT-IR2012UL are not always hosted as direct public downloads due to hardware versioning based on internal chipsets.
Contact Support: For the most reliable driver (especially for Windows 10/11), you must email ACTiSYS Technical Support at tech-support@actisys.com.
Identification: Include your adapter's serial number in the email. Some older units use "End of Life" (EOL) ICs that may not support modern operating systems.
Legacy Support: Older versions for Windows 98SE through Windows 7 may be found in archived sections of the ACTiSYS Download Page. 2. System Compatibility
The device is a "True Plug and Play" (PNP) adapter that draws power directly from the USB port.
Windows: Supports 32-bit and 64-bit versions of Windows 98SE, ME, 2000, XP, Vista, 7, 8, 8.1, 10, and 11.
Mac OS: There are known issues with the Mac OS IrDA stack; contact support before attempting installation on a Mac.
Mobile/Server: Compatible with Windows Server 2003 and Win CE 4.2/5.0. 3. Usage Protocols (OBEX vs. IrComm)
How you install the driver depends on your intended communication protocol:
IrDA-OBEX (File Transfer/Sync): Standard drivers typically support this for Windows 7 through 11 (32 and 64-bit). IrDA-IrComm (Virtual COM Port):
If you need a virtual serial port (IrComm), you must use third-party software like IrComm2K.
Limitation: IrComm2K does not support 64-bit Windows. If you require IrComm on a 64-bit system, ACTiSYS recommends upgrading to the Intelligent USB-IrDA adapter series (e.g., ACT-IR100UD). 4. Technical Specifications Speeds 9.6K to 16 Mbps (Supports SIR, MIR, FIR, and VFIR) Power USB Bus Powered (< 0.5 mA standby) Applications
Data logging, medical device syncing, wireless printing, and industrial backup 5. Troubleshooting Tips
Windows 10/11 "Workaround": If the driver does not work natively, ask the ACTiSYS team for their specific "Windows 10/11 workaround solution" email.
Port Conflicts: Because it is a USB-native IrDA device, it does not occupy standard physical COM or Parallel ports, avoiding IRQ or DMA conflicts. ACT-IR2012UL - ACTiSYS Corporation
ACT-IR2012UL is a USB IrDA adapter from ACTiSYS Corporation . To obtain the correct driver and related documentation (paper), follow these steps: 1. Driver Acquisition
Official drivers for the ACT-IR2012UL are not hosted as direct public downloads on the manufacturer's site due to hardware version differences. Request by Email : You must contact the ACTiSYS Tech Support Team to request the driver. Hardware Verification : Include your adapter's serial number
in the email. Older units may use EOL (End of Life) chips that lack native Windows 10/11 support and require specific workarounds provided by their team. 2. Technical Documentation ("Paper") If you need the official product specifications or manual: Product Flyer ACT-IR2012UL Flyer
provides a complete technical overview, including supported IrDA speeds (SIR, MIR, FIR, VFIR) and OS compatibility.
: Comprehensive manuals are typically bundled with the driver package provided via email from ACTiSYS Support 3. Compatibility Notes Windows 10 & 11
: Fully supported for newer serial numbers (e.g., those using updated chipsets). For older models, ACTiSYS provides a "workaround solution" via their support email.
: There are known issues with the Mac IrDA stack; contact support before attempting installation on a Mac. drafting the email
to tech support to ensure you get the right version for your serial number? ACT-IR2012UL - ACTiSYS Corporation