Actia Psa Xs Evolution 9780z5 | Driver !full!

Installing the ACTIA PSA XS Evolution (9780.Z5) driver is typically integrated into the installation process of diagnostic software like

. Because this hardware is a specialized dealer-level interface for Peugeot and Citroën, the drivers are often proprietary and bundled with the software rather than available as standalone Windows Update files. Quick Setup Guide Software Preparation

: Ensure you have the diagnostic software (DiagBox is the modern standard). Most versions require Windows 7 32-bit Windows XP actia psa xs evolution 9780z5 driver

virtual machine for maximum compatibility with older interfaces. Driver Installation Locate the "Setup Drivers DiagBox" "PSA VCI Driver" executable within your installation media. Run the installer (often named PSA_VCI_Driver.exe or found in a folder) as an Administrator

Wait for the installation to finish before plugging in the hardware. Hardware Connection Connect the PSA XS Evolution interface to your PC via the USB cable. Windows should recognize the device as "ACTIA USB Devices" or similar in the Device Manager. Firmware Verification PSA Interface Checker Installing the ACTIA PSA XS Evolution (9780

utility (often included in the toolset) to confirm the device is detected.

Ensure the firmware version is compatible with your software (e.g., Version 4.3.2 is common for DiagBox 7.xx). Critical Tips for Success Lexia aka Diagbox - C4 Picasso (2G) - Drive2 Open Device Manager and note the COM port number (e

5. Configuring the Software (COM Port)

After the driver is installed, you must tell the diagnostic software (Diagbox/PP2000) which COM port the device is using.

1. Open Device Manager and note the COM port number (e.g., COM3 or COM4).
2. Open your Diagbox or PP2000 software.
3. Navigate to the Configuration or Settings menu.
4. Select Hardware Configuration or Interface Configuration.
5. Select "XS Evolution" as the interface type.
6. If the software asks for a COM port, select the number you noted in Step 1.
7. Click Test or Save. The software should confirm communication with the vehicle ECU.

Q2: Can I use the driver with a clone interface?

A: Many Chinese clones mimic the 9780Z5 hardware ID. The driver will install, but you may experience random bricking due to fake FTDI chips. Use original ACTIA for reliability.

3. Installation Procedure

Phase 3: Installation Process

1. Run the installer as Administrator (Right-click → Run as Administrator).
2. If using manual INF installation:
   • Plug the 9780Z5 into a USB 2.0 port (avoid USB 3.0 hubs).
   • When Windows asks for a driver, choose "Browse my computer for drivers".
   • Point to the folder containing actia_xs_evolution.inf.
   • Select "ACTIA PSA XS Evolution (9780Z5)" from the list.
3. Complete the installation: You will see a popup confirming "Device ready to use."
4. Verify in Device Manager:
   • Expand "Ports (COM & LPT)".
   • Look for "ACTIA PSA XS Evolution (COMx)" – note the COM port number.
   • Expand "Universal Serial Bus devices" → "ACTIA PSA XS Evolution USB Module".