Aovo Pro Firmware B-01.0.11k Download 2021 Info

Aovo Pro Firmware B-01.0.11k is a legacy version of software used to unlock higher top speeds on Aovo Pro electric scooters, which are popular clones of the Xiaomi M365 Pro.

While the official Aovo Pro app no longer supports this specific speed hack, users often seek this firmware to bypass the standard 25 km/h (15.5 mph) limit and reach speeds of up to Summary of the Speed Hack Process According to community reports on

, the firmware can be accessed through third-party applications: Alternative App : Users have found success using the (available on the Apple App Store ) instead of the stock Aovo Pro app. Installation Method Connect the scooter to the 365Go app. Navigate to Settings > Firmware Upgrade Select an available version to start the process.

Interrupting the update at roughly 10% and restarting the app may reveal B-01.0.11k as an "Available Version".

: After a successful installation, a new "Speed limit value" option (up to 45 km/h) typically appears under Advanced Settings Important Considerations Known Bugs Aovo Pro Firmware B-01.0.11k Download

: This specific firmware version is known for a bug where the scooter's

can only be controlled through the mobile app, not the physical button on the scooter. Hardware Risks

: Be cautious with "fake" firmware or extreme speed increases; the Aovo's 350W motor and battery may not sustain high speeds for long periods, potentially leading to overheating or hardware failure.

C. Unlocking/Modding Base

Hackers often start with this version to generate a custom firmware profile (increase speed, remove Kers limit, etc.) because its DRM protections are weaker than v1.3.x or 1.4.x. Aovo Pro Firmware B-01

Aovo Pro Firmware B-01.0.11k: Download and Update Guide

Firmware version B-01.0.11k is a significant update for the Aovo Pro (ES80) electric scooter. It is widely regarded as one of the most stable stock firmware versions, addressing initial bugs found in earlier factory releases and improving the overall riding experience.

Q1: Is B-01.0.11k firmware free?

Yes. Aovo Pro does not charge for firmware updates. Any website asking for payment is a scam.

Error Codes After Update

• If you see Error 10 (Controller Fault) immediately after updating, restart the scooter 3-4 times in a row. This forces the controller to re-initialize with the new software.
• If the error persists, you may have flashed firmware meant for a different hardware version (ES80 vs ES60). You will need to flash the correct firmware for your specific controller.

Method 3: Using Scooter Flashing Apps

Some flashing apps store firmware locally after download. If you have an old backup:

1. Install DownG (Android) or M365 Plus (iOS).
2. Go to Settings > Firmware Cache.
3. Look for “B-01.0.11k” under previously flashed versions.
4. Extract the .bin file from the app’s data folder (requires root on Android).

Method 1: Using the Aovo Pro Official App (Easiest)

This is the recommended method for 95% of users. or any other clone models

Step 1 – Install the App Download “Aovo Pro” from your app store (blue icon with white scooter silhouette). Avoid fake “Aovo Master” or “Aovo Go” apps.

Step 2 – Pair Your Scooter

• Power on your scooter.
• Enable Bluetooth and location on your phone.
• Open the app, tap “Add Device” and select your scooter’s serial number (printed on the stem).

Step 3 – Check for Firmware Update

• Go to Settings (gear icon) > Device Info.
• Tap Firmware Version.
• If B-01.0.11k is available, you will see “New Firmware Ready – Download”.

Step 4 – Download and Flash

• Ensure the scooter is on a level surface, not moving.
• Press “Download”. The app will securely fetch the .bin file from Aovo’s CDN.
• After download, press “Install”. Keep the phone within 3 feet of the scooter’s controller (usually in the deck).
• Do not turn off the scooter or close the app. The process takes 3-5 minutes. A progress bar will show on the scooter’s LED display (0% to 100%).

Step 5 – Power Cycle

• Once the display shows “End” or “100%”, the scooter will reboot automatically.
• Manually power off, wait 10 seconds, and power on again.
• Verify the new firmware number in the app.

⚠️ Important Disclaimer

• Model Compatibility: This firmware is strictly for the Aovo Pro / AOVOPRO ES80 model. Do not attempt to flash this on the ES60, ES65, or any other clone models, as this may brick your scooter’s controller.
• Warranty: Proceed at your own risk. While flashing official firmware is generally safe, modifying settings via third-party apps (like ScooterHackingUtility) can void your warranty.