Search
Search
: You can find the specific "GT-3 Series Programming Software" on the Baofeng Download Area
. This is often labeled as the "UV5R series program software" in the interface once installed. Radioddity : If you purchased through Radioddity , they host a dedicated repository for the GT-3TP MarkIII software and manuals USB Drivers : Most programming cables require the Prolific PL-2303
driver. If you encounter a "Runtime Error 8020," you may need to downgrade to an older driver version to ensure compatibility with certain cable chipsets. Alternative Software (CHIRP) CHIRP Next
: This is the most popular free tool for programming handheld radios. It supports Linux, Mac, and Windows. Model Selection
: While there isn't always a specific "GT-3TP" option in the dropdown, users typically select the model to successfully read and write data. Programming Your Radio Preparation
: Connect your USB programming cable to your PC and the radio. Ensure the radio is and the volume is set to high. Identify COM Port
: Check your PC's Device Manager to find which COM port the cable is using (e.g., COM 3). Read from Radio baofeng gt-3tp mark iii software download
: In the software, select "Read from Radio" first. This downloads your current settings and creates a backup. Frequency Unlocking
: Factory units are sometimes locked to specific ranges. You may need to enable the "Other" settings in the software to unlock the full VHF (136-174 MHz) and UHF (400-520 MHz) bands. Write to Radio
Baofeng GT-3TP Mark III is an upgraded version of the popular GT-3 and UV-5R series, featuring tri-power settings (8W/4W/1W). To download the programming software, you have two primary options: the manufacturer's official software or the widely-used third-party tool, CHIRP. Official Software Downloads
The official software is typically a basic "CPS" (Customer Programming Software) provided by Baofeng or its distributors. Baofeng Official Site:
Direct download links for the GT-3TP Mark III programming software and user manual are available on the Baofeng Product Page Radioddity:
As a major authorized dealer, Radioddity maintains a repository of manuals and software for the GT-3TP Mark III Baofeng UK: Offers a general Download Area for manufacture programming software and drivers. Third-Party Software (Recommended) Most users prefer : You can find the specific "GT-3 Series
, a free, open-source tool that supports a wider range of features and is easier to manage than the official software. CHIRP Download: You can download the latest version from the official CHIRP project site Model Selection:
If "GT-3TP" is not listed in your version of CHIRP, users commonly report success by selecting the model or treating it as a standard Programming Requirements & Steps
No software will download on my Mac for the GT-3TP - Facebook
The Baofeng GT-3TP Mark III uses the same core programming architecture as the popular UV-5R series. You can download the necessary software and drivers from the following official and community-recommended sources: 1. Official Software Downloads
For the manufacturer-provided Customer Programming Software (CPS), use the following portals:
Radioddity Support: Provides a dedicated GT-3TP MarkIII Download Section containing the specific programming software and necessary USB device drivers. Bulk Edit: Import hundreds of frequencies in seconds
Baofeng Official Site: The Baofeng Download Area lists software compatible with the GT series. If a specific "GT-3TP" installer is not listed, the UV-5R series software is typically the compatible match for this radio's firmware. 2. Recommended Alternative: CHIRP
Most users prefer CHIRP, a free, open-source tool that supports a wider range of features and allows you to easily import repeater lists. Download: Available at danplanet.com.
Selection Tip: If "GT-3TP" does not appear in the CHIRP model list, select Baofeng as the vendor and BF-F8HP or UV-5R as the model to read/write to the radio. 3. Programming Cable Drivers
A specialized USB programming cable is required. Drivers vary based on the chip inside your cable: Baofeng Download Area
The Baofeng GT-3TP Mark III is a fantastic rugged handheld, but its interface is standard Baofeng. While you can program it by hand, using the PC software allows you to:
GT-3TP_MarkIII_Prog_V1.07.exe from Miklor or official dealer.| Issue | Solution |
|-------|----------|
| Fake "GT-3TP Mark III software" sites | Many are malware. Avoid baofengradio.com variants, radioddity.cn unofficial pages. |
| USB cable driver | Your cable likely has a fake Prolific chip. Use driver version 3.2.0.0 (not newer). |
| Radio menu lock | Some GT-3TP units require Menu → 34 (SFT-D) set to OFF before programming. |
| CHIRP won't connect | Lower radio volume to 50%, fresh batteries, re-plug cable, try different USB port. |
Setup_GT-3TP.exe as Administrator.C:\Program Files (x86)\Baofeng\).Prolific USB-to-Serial Comm Port (COM3). If you see a yellow exclamation mark, you have a counterfeit chip. The solution: Install the Prolific_Driver_Installer_v1.8.0.zip from Miklor.Downloading the software is only half the battle. Getting the radio to talk to the computer is often where users get stuck. Follow these steps exactly:
The software itself is lightweight, but the Prolific PL2303 or Silicon Labs CP210x driver inside your programming cable is where most users fail.
ZP5BF-5R. Programming out-of-band frequencies (e.g., 136-174 MHz beyond Part 97) is possible via software but illegal for unlicensed users (GMRS/MURS/FRS).GT3TP_Setup.exe.