When a PC identifies a gaming controller as BR23UBOOT1.00, it indicates the device is stuck in a low-level bootloader mode rather than acting as a controller. This issue, commonly reported with 8BitDo, GameSir, and DualShock 4 devices, usually requires firmware re-flashing or a hard reset to resolve. For detailed troubleshooting, see the discussion on Reddit.
Title: Unveiling BR23 U-Boot 1.00: A Leap Forward in Bootloader Technology
Introduction
In the world of embedded systems and firmware development, the bootloader plays a pivotal role in initializing the hardware and loading the operating system or firmware that controls the device. One such bootloader that has garnered significant attention in recent times is BR23 U-Boot 1.00. This article aims to provide an in-depth look at BR23 U-Boot 1.00, its features, and the impact it has on the industry.
What is U-Boot?
U-Boot, short for Universal Bootloader, is an open-source bootloader widely used in embedded systems, including a variety of Linux-based devices, such as set-top boxes, embedded computers, and other consumer electronics. It is highly customizable and supports a vast array of architectures, making it a versatile choice for device manufacturers.
Introducing BR23 U-Boot 1.00
BR23 U-Boot 1.00 is a specific iteration of the U-Boot bootloader, tailored for use on the BR23 ( likely a specific hardware platform or System on Chip (SoC)). This version brings several enhancements and features designed to improve boot times, increase security, and enhance the overall user experience.
Key Features of BR23 U-Boot 1.00
Enhanced Boot Speed: One of the critical areas of focus for BR23 U-Boot 1.00 is speed. With optimizations in the boot process, devices can now boot up significantly faster, reducing the time to market and improving the user experience by minimizing wait times.
Security Enhancements: Security is a paramount concern in today's connected world. BR23 U-Boot 1.00 incorporates advanced security features, including secure boot mechanisms that ensure only authorized firmware and software can run on the device, protecting it from malicious attacks.
Support for Modern Filesystems and Networking: This version of U-Boot supports modern filesystems and advanced networking capabilities, making it easier to integrate with contemporary software systems and network infrastructures.
Improved Hardware Support: BR23 U-Boot 1.00 likely includes support for a wide range of hardware components, providing flexibility for device manufacturers and making it easier to port to different hardware platforms.
Customization and Ease of Use: Understanding the diverse needs of the embedded systems market, BR23 U-Boot 1.00 offers a high degree of customization. Its user-friendly interface and comprehensive documentation make it accessible for developers of varying skill levels.
Impact on the Industry
The release of BR23 U-Boot 1.00 marks a significant milestone in bootloader technology, offering device manufacturers a robust, secure, and efficient solution for their embedded systems. Its impact is multifaceted:
Accelerated Development Cycles: By providing a stable and feature-rich bootloader, BR23 U-Boot 1.00 can significantly accelerate the development cycles of device manufacturers, allowing them to bring products to market faster.
Enhanced Device Security: The emphasis on security features helps protect devices from an increasingly sophisticated threat landscape, ensuring the integrity and trustworthiness of connected products.
Improved User Experience: Faster boot times and efficient operation contribute to a better user experience, a critical factor in today's competitive market.
Conclusion
BR23 U-Boot 1.00 represents a significant advancement in bootloader technology, offering a blend of performance, security, and usability. As the embedded systems landscape continues to evolve, the importance of robust and efficient bootloaders like BR23 U-Boot 1.00 cannot be overstated. Whether you are a developer, a device manufacturer, or simply an enthusiast, keeping an eye on developments like BR23 U-Boot 1.00 is essential for staying at the forefront of technology.
BR23UBOOT1.00 represents a USB bootloader mode for Jerry (Jieli) BR23 series Bluetooth chips, appearing when controllers or peripherals enter a firmware update or recovery state. This mode, often triggered by intentional updates, corrupted firmware, or stuck buttons, allows the device to be recognized as mass storage to flash new firmware via specific vendor tools.
Without more context, it's challenging to provide detailed information about "br23uboot1.00". However, I can offer some general insights into bootloaders and what might be relevant:
Functionality: A bootloader's primary function is to boot the operating system. It does so by executing a series of steps that include initializing the hardware, loading the operating system into memory, and transferring control to the OS.
Variety of Bootloaders: There are many bootloaders available, each with its own set of features and purposes. For example, GRUB and LILO are popular for Linux systems, while Windows uses its own bootloader.
Update and Configuration: Bootloaders can often be updated or configured. This might involve changing the boot order (the order in which the system attempts to boot from different devices), setting a password for accessing the bootloader menu, or updating the bootloader to support new operating systems.
Issues and Fixes: Sometimes, issues arise with bootloaders, such as incorrect configurations, corrupted bootloader code, or problems with booting the desired operating system. These issues can often be resolved with bootloader repair tools or by reconfiguring the bootloader.
If "br23uboot1.00" refers to a specific bootloader version used in an embedded system, a network device, or another specialized context, it might have unique features or requirements. For more detailed information, it would be helpful to know:
BR23UBOOT1.00 is not a feature but a firmware recovery state (also known as a "bootloader" or "maskrom" mode) for devices using Zhuhai Jieli (JL) AC69xx series chips. What it Means
When a device—most commonly a game controller (like the GameSir G7 or G4 Pro) or a Bluetooth speaker—is recognized by your PC as a USB storage device named "BR23UBOOT1.00," it indicates that the device's main operating firmware has failed to load or has been corrupted.
Instead of working as intended, the hardware has defaulted to its USB download/boot mode, which is used by manufacturers or advanced users to "unbrick" the device by flashing new firmware. Why This Happens
Failed Update: An interrupted firmware update left the device in an incomplete state.
Physical Glitch: A stuck button or a short circuit during power-on might have triggered the manual "bootloader" entry.
Hardware Failure: A component failure preventing the main chip from booting normally. Common Solutions
If your device is stuck in this mode and you cannot use it, try these steps:
Hard Reset: Look for a small pinhole on the back of the device. Use a paperclip to press and hold the internal button for 10–15 seconds while the device is unplugged, then reconnect it.
Firmware Re-flash: Check the manufacturer's website (e.g., GameSir Support) for a specific "Firmware Update Tool." These tools are designed to recognize a device in UBOOT mode and push a fresh copy of the operating software to it.
Check Cable/Port: Sometimes a faulty USB cable or hub can cause communication errors that trigger this mode. Try connecting directly to a different USB port on your PC.
If you see "BR23UBOOT1.00" on your computer, your gaming controller is in firmware debug/bootloader mode
, not functioning as a gamepad. This typically occurs when a firmware update fails or the controller is bricked. Overview of "BR23UBOOT1.00"
This label identifies a generic firmware loader used by many budget and third-party controllers, such as those from GameSir (G7) , and various "unbranded" PS4-style gamepads. What it is:
A basic USB storage mode the controller enters when its main operating system (firmware) is missing or corrupted. What it does:
It allows the PC to "see" the internal memory of the controller so you can manually flash a new firmware file (.bin or .exe) to it. Common Causes:
Using third-party software like DS4Windows that may conflict with the controller's drivers. A failed official firmware update from a manufacturer app.
Physical button combos held during plug-in that force bootloader mode. The "Review" Experience Performance in "BR23UBOOT1.00" Mode Connectivity
Not recognized as an HID (Human Interface Device); games will not detect it. Reliability br23uboot1.00
Users report controllers appearing as "USB storage" instead of gamepads. Ease of Fix Requires specific firmware tools from the manufacturer. How to Fix It Contact Support: Reach out to the manufacturer (e.g., 8BitDo Support ) for the specific "recovery" firmware for your model. Flash the Firmware:
If you have the repair software, run it while the device is in this mode. Many users have reported this as the only way to "unbrick" their device and make it functional again. Check Cables:
Sometimes a faulty USB cable causes the controller to drop into this low-level mode.
Did this appear after a specific update, or did the controller just stop working out of the blue?
Unlocking the Power of BR23UBoot1.00: A Comprehensive Guide
In the world of firmware and bootloaders, few names are as revered as UBoot. This popular open-source bootloader has been a staple in the development of embedded systems, providing a flexible and customizable way to boot operating systems on a wide range of devices. One particular version of UBoot, BR23UBoot1.00, has gained significant attention in recent times, and for good reason. In this article, we'll take a deep dive into the world of BR23UBoot1.00, exploring its features, benefits, and applications.
What is BR23UBoot1.00?
BR23UBoot1.00 is a specific version of the UBoot bootloader, tailored for use on a particular set of devices. The "BR23" prefix suggests that it's designed for use on devices based on the BR23 chipset or architecture. This version of UBoot is built with a specific set of features and configurations, making it an attractive option for developers working on projects that require a high degree of customization and control.
Key Features of BR23UBoot1.00
So, what makes BR23UBoot1.00 so special? Here are some of its key features:
Benefits of Using BR23UBoot1.00
So, why choose BR23UBoot1.00 over other bootloader options? Here are some benefits of using this particular version:
Applications of BR23UBoot1.00
BR23UBoot1.00 is suitable for a wide range of applications, including:
Getting Started with BR23UBoot1.00
If you're interested in using BR23UBoot1.00 for your project, here's a step-by-step guide to get you started:
Conclusion
BR23UBoot1.00 is a powerful and flexible bootloader that offers a range of benefits and applications. With its highly customizable nature, advanced security features, and support for multiple interfaces and operating systems, it's an attractive option for developers working on embedded systems, industrial automation, and medical device projects. By following the steps outlined in this article, you can unlock the power of BR23UBoot1.00 and take your project to the next level.
Additional Resources
For more information on BR23UBoot1.00 and UBoot in general, check out the following resources:
By leveraging the power of BR23UBoot1.00, you can create customized solutions that meet your specific needs and take your project to new heights. Whether you're a seasoned developer or just starting out, this bootloader is definitely worth exploring.
BR23UBOOT1.00 is a specific bootloader state or device identifier that appears when various electronics—most commonly gaming controllers, USB dongles, or speakers—fail to initialize their primary software and instead enter a "firmware update" or "recovery" mode.
When a device shows up with this name in your file explorer, Windows is treating it as a mass storage device
rather than its intended function (like a gamepad or audio device). Affected Devices
This identifier is frequently linked to hardware using generic or common internal chips (often from manufacturers like JieLi/BR), including: Gaming Controllers
: GameSir G7, GameSir Kaleid K1, 8BitDo Ultimate Bluetooth Controller, and generic/clone DualShock 4 controllers. Wireless Accessories : 2.4GHz USB dongles and CRKD Multi-Platform Guitars. Audio Equipment
: Creative Sound Bar speakers and various generic "X11" USB speakers. Common Fixes
If your device is stuck in this mode and not working, it usually indicates a "bricked" or corrupted firmware state. Users have successfully restored their devices using these methods: Hardware Reset
: Locate the small reset pinhole on the back of the device. Use a needle or toothpick to press and hold the button for 10 seconds. Power Cycle/Battery Pull
: For wireless controllers, disconnecting and reconnecting the internal battery (if comfortable opening the device) has been reported to force a proper reboot. Firmware Re-flash
: Contact their support for specific firmware files and an update app to "re-flash" the dongle while it is in the BR23UBOOT state. GameSir Nexus app or official support software to push a firmware update. Driver Reinstallation Device Manager Universal Serial Bus controllers
Right-click and uninstall the "BR23UBOOT" or "USB Mass Storage Device" entry. Unplug the device, restart your PC, and plug it back in.
: Try switching between USB 2.0 and USB 3.0 ports, as some devices struggle to initialize properly on specific port types. of controller or speaker?
Based on the identifier "br23uboot1.00", this appears to be a bootloader version string (likely for an embedded system, router, or development board – possibly from a Broadcom or similar ARM-based platform).
Below is a feature specification / release note put together for BR23 U-Boot v1.00.
saveenv command with CRC validation.bootcmd, bootargs, serverip, ipaddr, baudrate.SPL → DDR init → load U-Boot → U-Boot env → bootcmd
→ try: mmc 0:1 /boot/uImage → fallback: tftp → fallback: recovery mode
Would you like me to convert this into:
br23uboot1.00?Based on technical reports from the Microsoft Community and platforms like BR23UBOOT1.00 is not a standard feature but a bootloader mode
triggered when a third-party controller (such as those from 8BitDo or GameSir) enters a firmware update or recovery state.
To "draft" this as a functional feature for a product roadmap, you would frame it as a "Fail-Safe Firmware Recovery Interface." Feature Draft: Fail-Safe Recovery (UBOOT Mode) Objective:
To provide a hardware-level recovery path for game controllers that encounter firmware corruption or failed updates, ensuring the device is never permanently "bricked." Trigger Mechanism
: A specific physical button combination (e.g., holding L1+R1 while plugging in USB) forces the device into the BR23UBOOT1.00 Host Recognition
: The device enumerates as a standard USB Mass Storage device or a specific bootloader HID, allowing users to drag and drop firmware files without needing proprietary drivers. Safety Protocol
: The bootloader remains independent of the main application code, so even if the primary OS fails, this "UBOOT" layer remains accessible for a clean re-flash. Common Issues & Fixes
If you are seeing "BR23UBOOT1.00" and your controller isn't working, it is stuck in this mode: Firmware Update
: Download the official firmware updater from the manufacturer (e.g., 8BitDo Support ) to complete the update process. Hardware Reset When a PC identifies a gaming controller as BR23UBOOT1
: Unplug the controller, ensure no buttons are being held down, and plug it back in. Cable Check
: Ensure you are using a data-sync cable; some charging-only cables can cause the controller to hang in bootloader detection.
If your PC is recognizing a device as BR23UBOOT1.00 , it means the device has entered its firmware recovery or bootloader mode
and is currently acting as a storage drive rather than its intended function. This is a common issue with certain game controllers, particularly those using Jerry (JL) chips
, such as the GameSir G7, 8BitDo, and some DualShock 4 clones. Why This Happens Firmware Failure
: An interrupted or corrupted firmware update can cause the device to default to this state. Hardware Trigger
: A specific button combination was held during plug-in, or a physical reset button was triggered. Driver Errors
: Windows may misidentify the device due to driver conflicts. Microsoft Learn How to Fix It Why is my pc recognizing my controller as a storage device?
Understanding BR23UBOOT1.00: Why Your Device is Stuck in Bootloader Mode
If you have connected a device to your computer and seen it identified as BR23UBOOT1.00 instead of its actual name, you have likely encountered a firmware state known as a "bootloader loop" or recovery mode. This identifier is common among devices using Jieli (Zhuhai Jieli Technology) chipsets, frequently found in game controllers, Bluetooth speakers, and aftermarket peripherals. What is BR23UBOOT1.00?
BR23UBOOT1.00 is the low-level identifier for the U-Boot bootloader on devices powered by Jieli BR23-series chips. Under normal circumstances, this bootloader is invisible; it runs for a fraction of a second to initialize the hardware and then hands control over to the main operating firmware.
When a device appears as "BR23UBOOT1.00" in Windows Device Manager or as a USB Mass Storage Device, it means the main firmware failed to load, and the device has defaulted to its "failsafe" or "update" mode. Common Affected Devices This issue is most frequently reported by users of: U-Boot Reference Manual | Digi International
BR23UBOOT1.00 is a specific bootloader mode triggered by hardware using ZhuHai Jieli chipsets. It most commonly appears when a gaming controller or peripheral (such as those from GameSir, 8BitDo, or generic PS4 DualShock clones) is recognized by a PC as a "USB Mass Storage Device" or "Disk Drive" rather than a gamepad. Why This Happens
When a device enters this state, it is stuck in its UBOOT (Universal Bootloader) mode. This is a low-level state intended for:
Firmware Updates: Allowing the user to flash new software directly to the chip.
Emergency Recovery: Providing a way to repair the device if the primary system software is corrupted.
Factory Programming: Loading the initial operating software during manufacturing. Common Fixes
If your device is stuck in this mode and not working as a controller, try the following steps reported by users in the community: Reflash Firmware:
For 8BitDo Ultimate controllers, you often need to contact support for a specific update app and firmware file to "re-flash" the dongle while it is in this mode. Manual Driver Assignment: Open Device Manager.
Find the "USB Mass Storage Device" or the item with a yellow exclamation mark.
Right-click and select Update Driver > Browse my computer > Let me pick from a list.
Look for and select Xbox Peripherals or Xbox Controller to force Windows to recognize it as an input device. Physical Reset:
Try unplugging and replugging the device into different USB ports.
On PS4 controllers, some users find that unplugging the internal battery and then reconnecting it (while using a wired USB connection to the PC) can bypass the bootloader loop. Specific Software:
If using a third-party controller like GameSir, ensure you are using their official app to check for forced updates that might resolve the "BR23UBOOT" error. Which specific device or brand (e.g., GameSir,
, or a generic gamepad) are you currently seeing this error on? Why is my pc recognizing my controller as a storage device?
If your computer is recognizing a device (like a game controller or speaker) as BR23UBOOT1.00 , it typically means the device has entered a fail-safe bootloader mode
and is not functioning normally. This is widely regarded as an error state rather than a standard software version to "review". Microsoft Learn Why this happens Failed Firmware Update
: A common occurrence during interrupted or incorrect firmware updates for devices like the 8BitDo Ultimate Bluetooth Controller GameSir G7 , or certain PS4/PS5 controllers. Power/Battery Issues
: In some cases, a depleted or faulty battery in a controller can trigger this mode when plugged into a PC. Hardware Connectivity
: Faulty USB cables or specific hardware failures can force the internal chip (often an AC5xxx or similar series) into this "USB download" or "UBOOT" mode. User Sentiment and "Review" Frustration
: Most users find this state highly problematic because the device is seen as a storage disk
instead of a functional peripheral, rendering it unusable for its intended purpose. Troubleshooting Difficulty
: While some users fix it by re-flashing official firmware provided by the manufacturer (e.g.,
support), others report that antivirus software often flags these recovery tools as potential threats, adding to the difficulty. How to enter USB download (UBOOT) mode - GitHub
Understanding BR23UBOOT1.00 : Troubleshooting and Firmware Solutions
When a modern gaming controller or Bluetooth device is suddenly recognized by a computer as a USB mass storage device named BR23UBOOT1.00
, it typically indicates that the hardware has entered a low-level "bootloader mode". This state is usually reserved for flashing new firmware but can occur due to software glitches or hardware triggers. What is BR23UBOOT1.00?
The name refers to a specific boot device interface found in hardware using chips from ZhuHai JieLi Technology (often abbreviated as JL). These chips are widely used in: Gaming Controllers: Including the GameSir G7 Go to product viewer dialog for this item. , and various generic PS4/DualShock 4 clones. Bluetooth Dongles: Such as the 8BitDo Ultimate Bluetooth controller dongle
Audio Devices: Various Bluetooth speakers and audio modules.
When in this mode, the device will not function as a controller but instead appears as a small, empty drive or uninitialized disk in Windows. Common Fixes for Gaming Controllers
If your controller is stuck in BR23UBOOT1.00 mode, try these sequential troubleshooting steps: Why is my pc recognizing my controller as a storage device?
When a device appears as BR23UBOOT1.00, it means it has dropped into its low-level USB Bootloader (UBOOT) mode, typically due to corrupted firmware, a hardware fault, or an accidental button sequence. This is most common with gaming controllers like the 8BitDo Ultimate Bluetooth, GameSir G7, and Legion Go controllers. Why This Happens
Firmware Failure: The main software (firmware) on the chip (often a JL/Jerry series chip) has crashed or failed to load.
Recovery Mode: The device is waiting for a new firmware file to be "written" to its internal flash memory. Enhanced Boot Speed : One of the critical
Hardware Issue: Low battery or a stuck reset button can sometimes trigger this state. How to Fix It
Depending on your specific device, try these steps in order: 1. Hardware Reset (First Step)
Physical Reset: Use a small pin to press the reset hole on the back of the controller for 10–15 seconds.
Battery Cycle: For some controllers (like the PS4 DualShock 4), users have reported that disconnecting the internal battery and reconnecting it forces the device out of this loop. 2. Manual Firmware Re-flash
Since the PC sees the device as a storage drive, you must provide the correct firmware binary to "revive" it.
Download Official Tools: Visit the manufacturer's support page (e.g., 8BitDo Support or GameSir Download Center) for a specific "Firmware Update Tool".
Contact Support: If the standard updater doesn't recognize the device in UBOOT mode, email the manufacturer. They often provide a standalone .exe and .bin file specifically designed to flash devices stuck in the BR23 state.
Run as Admin: Ensure any recovery software is run with administrative privileges and that your antivirus isn't blocking it (some tools may be flagged as false positives). 3. Connection Troubleshooting
Direct Plug-in: Connect the device directly to your PC's motherboard USB port, avoiding docks or hubs.
Cable Swap: Use the original high-quality USB-C cable provided with the device.
If your device is a Legion Go controller and the firmware shows 00000000, you may need to use the Legion Space software to force a firmware update while the controllers are attached. How to enter USB download (UBOOT) mode - GitHub
BR23UBOOT1.00 is not a consumer product you can buy, but rather a firmware bootloader state that appears when certain gaming controllers—most notably the 8BitDo Ultimate Bluetooth, GameSir G7, and some generic DualShock 4 clones—fail or enter a recovery mode.
If your device is showing up as "BR23UBOOT1.00" on your PC, it is currently unusable as a controller because it is being recognized as a USB mass storage device. Common User "Reviews" & Sentiments
Since this is an error state, reviews are generally from frustrated users trying to fix their hardware:
Failed Connection: Most users encounter this when their 2.4GHz dongle or controller suddenly stops connecting and shows this name in Windows Device Manager instead.
Fixability: Users report mixed success. Many found that re-flashing the firmware with official tools from the manufacturer (like the 8BitDo support team) can restore the device.
Security Concerns: Some users warned that the firmware repair software provided by manufacturers (like GameSir) was flagged as a trojan by antivirus software, making them hesitant to use the "solid" fix. How to Fix It
If you are seeing this name, your device is likely stuck in "update mode." You can usually resolve this by:
Downloading official firmware: Visit the manufacturer's site (e.g., GameSir Tutorial or 8BitDo Support).
Using a Repair Tool: Run the specific updater/re-flasher provided by support while the device is in this state.
Hardware Reset: Some users suggest holding specific button combos (like Xbox + Menu for GameSir or unplugging/replugging until the correct name appears) to force it back to controller mode.
Are you currently seeing this name in your Device Manager, or
It looks like you're referring to "br23uboot1.00" — possibly a firmware file, bootloader version, or a debug log fragment.
Since you mentioned "long post", I’m guessing you either:
br23uboot1.00 means.Could you please share more context? For example:
br23uboot1.00 the version string shown at startup?If you paste the actual long log, I can help you:
Just paste the log here — I’ll read through it.
Unlocking the Power of BR23UBoot1.00: A Comprehensive Guide
In the world of firmware and bootloaders, few names are as revered as UBoot. This open-source bootloader has been a staple of embedded systems development for years, providing a flexible and customizable way to boot and interact with devices. One particular version of UBoot, BR23UBoot1.00, has been gaining attention in recent times, and for good reason. In this article, we'll take a deep dive into the world of BR23UBoot1.00, exploring its features, benefits, and applications.
What is UBoot?
Before we dive into the specifics of BR23UBoot1.00, let's take a brief look at UBoot itself. UBoot, short for Universal Bootloader, is an open-source bootloader that provides a flexible and customizable way to boot and interact with devices. It's widely used in embedded systems, including devices such as routers, set-top boxes, and other consumer electronics.
UBoot's primary function is to load and execute the operating system, but it also provides a range of other features, including:
What is BR23UBoot1.00?
BR23UBoot1.00 is a specific version of UBoot, designed for use on devices based on the BR23 (Broadcom BCM2389) chipset. This chipset is commonly used in a range of devices, including routers, access points, and other network equipment.
BR23UBoot1.00 is a customized version of UBoot, optimized for use on BR23-based devices. It provides a range of features and benefits, including:
Features of BR23UBoot1.00
So, what makes BR23UBoot1.00 so special? Here are just a few of its key features:
Benefits of BR23UBoot1.00
So, what are the benefits of using BR23UBoot1.00? Here are just a few:
Applications of BR23UBoot1.00
So, where is BR23UBoot1.00 used? Here are just a few examples:
Conclusion
In conclusion, BR23UBoot1.00 is a powerful and flexible bootloader that provides a range of benefits and features for devices based on the BR23 chipset. Its improved boot times, enhanced security, and increased flexibility make it an ideal choice for a wide range of applications, from routers and access points to consumer electronics.
Whether you're a developer, engineer, or simply someone interested in learning more about bootloaders, BR23UBoot1.00 is definitely worth checking out. With its high degree of customizability and support for a wide range of devices, BR23UBoot1.00 is sure to remain a popular choice for years to come.
Additional Resources
If you're interested in learning more about BR23UBoot1.00, here are a few additional resources to check out:
By providing a comprehensive guide to BR23UBoot1.00, we hope to have shed some light on this powerful and flexible bootloader. Whether you're a seasoned developer or simply someone interested in learning more about bootloaders, BR23UBoot1.00 is definitely worth checking out.