Canon Service Tool V.4718 -

Guide to Using Canon Service Tool v.4718 The Canon Service Tool v.4718 is a specialized maintenance utility used to reprogram Canon printers after component replacements or to resolve critical internal errors. It is most commonly used by technicians to perform a "hard reset" on printers that have reached their internal ink absorber limit, often indicated by "Support Code 5B00" or similar error messages. Key Features and Compatibility

Unlike standard driver software, the Service Tool is a portable utility that does not require installation.

Primary Function: Clears ink counters, verifies EEPROM data, and resets the printer after hardware service.

Supported Models: Version 4718 is specifically tailored for the Canon PIXMA G-Series, including models like the G1000, G2000, and G3000.

Error Management: It helps distinguish between "Operator Call" (user-fixable) and "Service Call" (hardware-level) errors. How to Prepare Your Printer (Service Mode)

To use the v.4718 tool, the printer must first be placed in Service Mode. If it is in its normal state, the software will not communicate with the device.

Power Off: Turn off the printer but keep it connected to a power source. Button Sequence: Press and hold the Stop/Reset button.

Power On: While holding Stop, press and hold the Power button.

Enter Mode: Release the Stop button (keep holding Power), then press the Stop button 5 times.

Finalize: Release the Power button. The power light should flash and then stay lit, indicating it is ready for the Service Tool. Common Reset Procedure

Once the printer is in Service Mode and the tool is open on your PC: canon service tool v.4718

Clear Ink Counter: In the "Main" tab of the tool, find the "Clear Ink Counter" section.

Set Value: Ensure the "Absorber" is set to "Main" and click "Set".

Verify: The tool may print a small test page or show a "finished" dialog.

Restart: Turn the printer off and then back on to exit Service Mode and resume normal printing. Important Precautions

Ink Absorbers: Resetting the counter does not physically clean the ink pads. If they are truly full, they may eventually leak if not replaced.

Software Origin: Ensure you obtain the tool from a reliable source to avoid malware, as it is a technician-level utility not typically distributed on the main Canon Support site.

Error Codes: If you encounter codes like 002, 005, or 006 while using the tool, it usually indicates the printer is not correctly in Service Mode or the version is incompatible with your specific model.

For simpler issues like "Ink has run out" messages, you can often bypass the error by simply holding the Stop/Reset button for 5 seconds without needing the Service Tool. Ink absorber full - MX892 - Canon Knowledge Base

Canon Service Tool v.4718: The Essential Guide to Printer Maintenance and Resets

Canon printers are workhorses, but like any machine, they eventually require maintenance that goes beyond simply changing an ink cartridge. When you encounter a "Service Call Error" such as error code 5B00 (indicating a full waste ink absorber), the Canon Service Tool v.4718 becomes an invaluable resource. Guide to Using Canon Service Tool v

This article explores what this tool is, which printers it supports, and how to use it to keep your device running smoothly. What is Canon Service Tool v.4718?

The Canon Service Tool v.4718 is a specialized software utility used to communicate with Canon printers in Service Mode. It is primarily designed for service centers and advanced users to perform technical tasks after replacing internal components like the logic board, print head, or the waste ink absorber.

Its most common use is resetting the ink absorber counter (often called the "pampers" counter), which stops the printer from working once it reaches a certain limit to prevent physical ink overflow. Key Features and Capabilities

The tool provides several functions that aren't available in the standard user maintenance tab:

Clear Ink Counter: Resets the waste ink absorber percentage to 0%.

EEPROM Management: Allows you to read, save, and verify EEPROM data to troubleshoot deep system issues.

Test Prints & Nozzle Checks: Runs advanced diagnostic prints to confirm hardware health.

Set Destination: Configures the printer’s regional settings (e.g., EUR, USA, ASA). Compatibility: Supported Printer Models

Version 4718 is specifically known for its broad support of the Canon Pixma G-series (MegaTank) and several Pro models. Supported Models G1000 Series G1000, G1100, G1200, G1400, G1500, G1800, G1900 G2000 Series

G2000, G2002, G2100, G2200, G2400, G2500, G2600, G2800, G2900 G3000 Series The Future: Canon’s Anti-Repair Measures Canon is actively

G3000, G3100, G3102, G3200, G3400, G3500, G3600, G3800, G3900 Professional Pixma Pro-500, Pixma Pro-1000

Note: While version 4718 is robust for the models above, other series like the MG or MX may require different versions (e.g., v.4713 or v.3400) depending on their release year. How to Use Canon Service Tool v.4718

Using the tool requires a Windows PC and a USB connection; it generally cannot be used over Wi-Fi. Step 1: Enter Service Mode

The tool will only "see" your printer if it is in Service Mode. The standard method for many Pixma models is: Canon Service Tool v.4718 Overview | PDF - Scribd

The Future: Canon’s Anti-Repair Measures

Canon is actively fighting third-party service tools. Newer printers (2021–present) use encrypted EEPROM signatures and require online authentication to enter Service Mode. v.4718 will not work on these printers. Moreover, Canon has sued websites distributing service tools for copyright infringement.

If you own a printer made after 2020, do not attempt v.4718. Instead, look for:

• Canon Service Tool v.5100 or v.5200 (harder to find)
• Official replacement parts for the waste ink tank (some newer models have replaceable cartridges).

What Is the Canon Service Tool?

The Canon Service Tool (often referred to as SST or Service Tool) is a diagnostic and maintenance application used primarily to:

• Reset waste ink pad counters (also called “ink absorber” counters)
• Change device region settings
• Perform EEPROM initialization and adjustments
• Troubleshoot service mode operations on Canon printers (especially PIXMA, MAXIFY, and imageCLASS models)

Unlike standard printer drivers or maintenance utilities, the Service Tool operates at a firmware level and is not intended for end users.

How to Download Canon Service Tool v.4718 Safely

Since this is not an official download, you need to be cautious. Many websites bundle malware, adware, or trojans with the tool.

What is the Canon Service Tool v.4718?

First, let's dispel the myth that v.4718 is a "hack" or "malware." The Canon Service Tool (also known as the Canon Service Program or SST) is an official diagnostic software developed by Canon for authorized service centers. Version v.4718 is a specific build designed to interface primarily with Canon’s PGI-250/CLI-251 cartridge series printers and the newer GI-490/GI-590 EcoTank style printers (like the G系列的).

Unlike the standard printer drivers or the IJ Setup Utility, this tool bypasses the user-mode restrictions. It communicates directly with the printer’s EEPROM (Electrically Erasable Programmable Read-Only Memory) and logic board.

2. Third-Party Resetter Hardware

For cartridge-based printers (PGI-250/CLI-251), you can buy a physical "Resetter" dongle for $15 on Amazon. This is safer because it doesn't require PC software.