Chevron Digital Timer Ew-32 User Manual !!link!!

Before programming the device, ensure the internal memory backup battery is fully charged. Charge Time : Plug the timer into a live wall outlet for 12–14 hours before its first use or after a long period of inactivity. System Reset : Use a pin or paperclip to press the "R" (Reset)

button. This clears all previous settings and readies the device for a fresh setup. Setting the Current Time To synchronize the timer with your local time: Enter Mode : Press and hold the

button for approximately 3 seconds until the display begins to flash. Adjust Values "+" and "-" buttons to set the correct hour, minute, and day of the week. after each adjustment to lock in the value. Programming On/Off Schedules

The EW-32 supports multiple memory slots (typically P1–P10) for complex scheduling. Access Programs : Press the button once to enter the program setting mode. Select Slot "+" or "-"

buttons to choose a program number (e.g., P1) and confirm with Set "ON" Time

: Adjust the hour and minute for when you want the device to activate. Select specific days or blocks of days (e.g., Monday–Friday) and confirm. Set "OFF" Time chevron digital timer ew-32 user manual

: Repeat the process to establish when the device should turn off. Operating Mode : Press the ON/AUTO/OFF button to select . Programmed schedules will run when the timer is in this mode. Advanced Functions Countdown (CDT) : Enter this mode by pressing the button. Set your desired duration and press to start or stop the timer. Random (RND) : Press the

button to activate a security feature that turns lights on and off randomly within a 2–32 minute

window of your set programs, giving the appearance that someone is home. Manual Override ON/AUTO/OFF

button allows you to manually force the outlet "ON" or "OFF" at any time without deleting your saved programs. energy savings for a specific appliance based on your planned schedule? AI responses may include mistakes. Learn more Chevron Digital Timer Ew 32 Zip - Facebook

The Chevron Digital Timer EW-32 is a plug-in automation device featuring a large LCD display and support for up to 10 daily on/off cycles Initial Setup and Reset Before programming the device, ensure the internal memory

Before first use or after a long period of non-use, plug the timer into a wall outlet and charge it for to power the internal memory backup battery. : Use a paper clip or pin to press the button to clear all previous settings. Setting the Current Time Press and hold the button for 3 seconds to enter time setting mode. buttons to adjust the current , then press to confirm. buttons to set the , then press buttons to set the , then press to finalize the current clock. Programming ON/OFF Cycles

The EW-32 supports up to 10 independent programs (P1–P10). Enter Mode : Press the button once to enter program setting mode. Select Program to choose a program number (e.g., P1), then press Set ON Time

Select the active days (e.g., individual days, weekdays, or weekends) using , then press Adjust the for the appliance to turn on. Set OFF Time

: Repeat the process to set the specific time and days for the appliance to turn off. : Press the button to confirm each parameter. Operating Modes Toggle through the following modes by pressing the ON/AUTO/OFF

: Manual override to keep the connected device permanently on. : The timer operates based on your programmed schedules. : Manual override to keep the device permanently off. Special Functions Countdown Timer : Press the button once to enter countdown mode. Set the duration with , and use the button to start/stop the timer. Random Mode ON: The appliance stays permanently ON, ignoring timer

: Some versions allow activating a "Random" feature (often by pressing a specific button combination) to turn devices on/off within a 10–31 minute variance for security. for a light or appliance? Chevron Digital Timer Ew 32 Zip - Facebook

6. Operating Modes

The timer has a Master Switch located on the side or front of the unit.

Note: To run your programs, the switch must be set to AUTO.

3. Setting Programs (Up to 8 ON/OFF pairs)

  1. Press PROG once. Screen shows “1 ON” (first program start time).
  2. Set day(s) using +/–:
    • MO TU WE TH FR SA SU (each appears)
    • Or MO-FR (weekdays), SA+SU (weekend), MO TU WE etc.
  3. Press PROG to confirm day(s). Then set hour +/–, press PROG, set minutes.
  4. Press PROG again. Screen shows “1 OFF”. Repeat steps 2–3 for off time.
  5. Press PROG for next program (2 ON, 2 OFF… up to 8).
  6. Press CLOCK to exit programming mode.

Section 2: Anatomy of the Chevron EW-32 (Button Layout)

To follow this manual, locate these 6 buttons on the front panel below the LCD screen:

| Button Symbol | Name | Primary Function | | :--- | :--- | :--- | | SET/CLK | Set / Clock | Enter settings, confirm values, return to clock. | | ON/AUTO/OFF | Mode Toggle | Switch between Timer ON, Timer OFF, and AUTO mode. | | + (Plus) | Increase Value | Increase hours/minutes/current time. | | - (Minus) | Decrease Value | Decrease hours/minutes/current time. | | PROG (P) | Program | Enter program memory slots (1-8). | | RST | Reset | (Recessed pinhole) Resets timer to factory settings. |

LCD Screen Indicators: