The CipherLab 308 USB-to-RS232 Interface Converter is a hardware adapter used to connect RS-232 serial devices—such as older CipherLab barcode scanners or mobile computers—to a modern computer via a USB port. This device functions as a Virtual COM Port, meaning that once the driver is installed, the operating system treats the USB connection as a standard serial (COM) port. Driver Specifications
The CipherLab 308 converter is primarily based on the Silicon Labs CP210x chipset.
Device ID: The hardware is typically identified by Windows with the ID USB\VID_10C4&PID_EA60.
Operating Systems: Drivers are available for Windows XP, 7, 8, 10, and 11 (both 32-bit and 64-bit), as well as Linux and Mac OS. Where to Download
Official CipherLab Support: Drivers and utilities like ScanMaster are available on the CipherLab Download Page.
Silicon Labs CP210x Drivers: Because the 308 uses the CP210x chip, the standard Silicon Labs VCP Drivers are often the most up-to-date choice for modern operating systems.
Legacy Resources: Technical documentation and older driver versions can be found on community-supported sites like ScanCode.ru or through technical guides on iKelp. Installation Steps
Disconnect the Device: Do not plug the USB converter into the computer until the driver software has been installed.
Run Installer: Download the driver package (often a .exe or .rar file), unzip it, and run the setup.exe or pre-installer.
Connect Hardware: After the installation completes, plug in the CipherLab 308. Windows should recognize it as "CIPHERLAB 308 USB-to-RS-232 Interface Converter". cipherlab 308 usb-to-rs232 interface converter driver
Verify COM Port: Open Device Manager and expand the "Ports (COM & LPT)" section. Note the COM port number (e.g., COM3) assigned to the device; you will need this for your scanning software. Common Issues
Yellow Exclamation Mark: If the device is listed as "Unknown Device," try manually updating the driver through Device Manager by pointing it to the folder where you unzipped the files.
Old Hardware on New OS: For Windows 10 or 11, ensure you are using the latest Silicon Labs 6.7 or higher driver version to prevent system stability issues like "Blue Screen of Death".
Are you having trouble with a specific Windows version, or do you need help mapping the COM port to a particular software? Download - CipherLab * Mobile Computers. * Scanner. Cipherlab 308 Usb To Rs232 Interface Converterrar
* The Cipherlab 308 Usb To Rs232 Interface Converterrar is available for download from the official website of Cipherlab Co., Ltd.
If you need the exact file or step-by-step screenshots for the driver rollback, let me know.
I’m unable to provide a full driver download or a complete driver article, but here is the technical information you need for the CipherLab 308 USB-to-RS232 Converter.
The CipherLab 308 USB-to-RS232 Interface Converter is a humble piece of kit, often hidden behind a desk or tangled in a mess of cables. But without its dedicated driver, the modern supply chain would grind to a halt. It serves as a reminder that in the digital age, hardware is nothing without the software that drives it.
CipherLab 308 USB-to-RS232 interface converter requires the Silicon Labs CP210x USB to UART Bridge VCP Driver The CipherLab 308 USB-to-RS232 Interface Converter is a
to function. Once installed, your computer will recognize the device as a virtual COM port, allowing serial communication with barcode scanners or mobile computers. 🛠️ Installation Steps Download Driver: Visit the Silicon Labs VCP Driver page to download the " CP210x VCP Windows " driver kit.
Unzip & Run: Extract the folder and run CP210xVCPInstaller_x64.exe (for 64-bit Windows). Connect Hardware: Plug the CipherLab 308 into your USB port after installation is complete.
Verify COM Port: Open Device Manager and check under Ports (COM & LPT) to find the assigned port number (e.g., COM3). Key Specifications Chipset: Silicon Labs CP210x
Compatibility: Works with CipherLab 150x, 156x, 166x, 8xxx, and 25xx series. OS Support: Windows (XP to 11), Linux, and Mac OS.
Features: Provides power directly to scanners via USB; includes LED transmission indicators. Troubleshooting
Device Not Found: Ensure the "VCOM" mode is enabled on your scanner by scanning the appropriate configuration barcode.
Multiple Drivers: If the standard driver fails, check DriverIdentifier for specific OEM versions linked to your hardware.
Port Reset: If the port is not appearing, restart your computer to apply the Virtual COM settings.
For official technical documents and utilities like ScanMaster or ProgLoad, visit the CipherLab Support Portal. Summary
The CipherLab 308 is a USB-to-RS232 interface converter. This type of device is used to connect a computer's USB port to a device that uses an RS232 serial port for communication. This is particularly useful for older devices or industrial equipment that rely on serial connections.
Many users mistake USB-to-Serial converters for simple wiring adapters. They are not. They are active signal converters. When you plug the CipherLab 308 into a Windows PC, the computer sees a USB device. It does not instinctively know how to speak "Serial."
This is where the CipherLab 308 Driver becomes the hero of the story.
The driver performs a sophisticated sleight of hand. It creates a "Virtual COM Port" (VCP). To the Windows operating system, the driver says, "I am a USB device." But to the inventory software running on the PC, the driver says, "I am a traditional Serial Port (COM1, COM2, etc.)."
Without this specific driver, the CipherLab 308 is a paperweight. The computer will power it, but no data will flow. The driver manages the data buffers, handles the flow control (RTS/CTS), and ensures that the high-speed USB bursts are translated into the steady, slower stream of RS-232 data without loss.
Manufacturer's Website: The best place to start looking for the driver is the official CipherLab website or the specific product page for the CipherLab 308. Look for a "Downloads" or "Support" section.
Driver Databases: Websites like DriverHub, DriverPack, or even generic driver databases might have the driver available for download. However, be cautious when using third-party sites to avoid malware.
Operating System Compatibility: Make sure to download the driver that is compatible with your operating system (Windows, macOS, Linux, etc.).