Jump to content

DAP-1360 Firmware 6.10 — Guida rapida al download e all'aggiornamento

Technical Report: DAP-1360 Firmware Version 6.10 Download

Report ID: DAP1360-FW-6.10
Date: [Current Date]
Subject: Availability, acquisition, and considerations for D-Link DAP-1360 Access Point firmware v6.10

Prerequisites:

  1. Hardwired Connection: Never flash over Wi-Fi. Connect a PC/Laptop directly to the DAP-1360 via Ethernet cable.
  2. Static IP: In some recovery scenarios, the device may default to 192.168.0.50. Setting your PC to a static IP in the 192.168.0.x range is recommended.
  3. Browser Compatibility: Use Internet Explorer, Firefox Legacy, or a browser that supports legacy TLS. Chrome often blocks the upload scripts of older D-Link UIs.

1. Security Patches (CVE Fixes)

The 6.10 update addresses several vulnerabilities discovered in older versions (6.04 and earlier), including:

Note finali

Vuoi che cerchi la pagina di supporto ufficiale D-Link per il DAP-1360 ora?

(Invoking related search suggestions.)

The D-Link DAP-1360 (Hardware Revision F1) firmware version 6.10 is currently identified as critically vulnerable and has been superseded by security patches. Because the DAP-1360 has reached its End of Life (EOL) as of August 2020, D-Link recommends replacing the device with a modern, supported model for continued security. Critical Security Status: Firmware 6.10

Firmware version 6.10 and earlier are affected by a significant vulnerability (CVE-2021-44127).

Vulnerability Type: Unauthenticated remote code execution or unauthorized access.

EPSS Score: 13.515%, indicating a high probability of exploitation within 30 days.

Recommendation: If you must continue using this device, you should bypass version 6.10 and immediately upgrade to the v6.15 Hotfix (specifically v6.15EUb01_Beta_Hotfix or later) to address known security flaws. Firmware Download and Support Resources

D-Link maintains legacy files for this product, though official development has ceased. You can find the latest available firmware and release notes at these official locations:

D-Link Support (Australia/NZ): Accesses downloads for Rev F, Rev C, and Rev B hardware.

D-Link Legacy Products Portal: Documentation and support for EOL hardware.

D-Link FTP Repository (Global/Russia): Direct access to firmware binary files (.bin or .img) for various hardware revisions. Update Instructions

Verify Hardware Revision: Check the sticker on the bottom of your device (e.g., Rev F1, C1, or B1). Firmware is revision-specific; installing the wrong version can "brick" the device.

Access the Interface: Connect to the device and enter http://192.168.0.50 (standard for APs) or http://dlinkrouter.local in your browser.

Upload Firmware: Navigate to Maintenance or Tools > Firmware Update. Upload the file downloaded from the official repository.

Factory Reset: D-Link strongly recommends performing a factory reset after upgrading to ensure the new configuration applies correctly. Index of /pub/Wireless/DAP-1360/Firmware - D-Link FTP

Turbocharge Your WiFi: A Guide to the D-Link DAP-1360 Firmware 6.10

Is your home WiFi feeling a bit sluggish lately? Before you go out and buy a brand-new router, there’s one simple, often-overlooked step that can breathe new life into your hardware: a firmware update. Today, we’re diving into the D-Link DAP-1360 and specifically looking at Firmware version 6.10 Revision F1 Why Firmware 6.10 Matters

Firmware is the "brain" of your access point. While version 6.10 is a stable release for the F1 revision, it is vital to keep your device updated to ensure peak performance and security. Vulnerability Protection

: Security researchers have previously identified vulnerabilities in older versions of this firmware

. Updating to the latest available version (like 6.10 or its subsequent hotfixes) is your first line of defense against network intrusions. Stability and Compatibility

: Firmware updates often resolve "IOT" issues with specific chipsets (like Broadcom or Atheros) and fix unstable connections when using tricky modes like Operating System Support

: Newer firmware helps your older hardware play nice with modern operating systems like Windows 7, 10, or 11 How to Download and Install

Ready to upgrade? Here is the quick-start guide to getting your DAP-1360 on the right track: Identify Your Revision

: Check the sticker on the bottom of your device. This firmware is typically for Revision F1 Download the File : You can find official firmware files through the D-Link Support Resources D-Link FTP Server . Look for the file ending in Access the Interface

: Plug your computer into the DAP-1360 via an Ethernet cable. Open your browser and type

To download firmware version 6.10 for the D-Link DAP-1360 (specifically for hardware Revision F1 ), follow the instructions below. Firmware Details & Compatibility Hardware Revision: This specific version is designated for Support Status: The DAP-1360 has reached its End of Life (EOL)

as of August 2020. D-Link no longer develops new firmware for this model, and version 6.10 is one of the final legacy releases. National Institute of Standards and Technology (.gov) Download Sources

Because this is a legacy product, official downloads are primarily found on D-Link's support and FTP servers: D-Link Support (Australia/Global): You can often find revision-specific downloads on the D-Link Australia Support Page D-Link US Legacy Portal Direct FTP Access: For older versions or specific revisions like F1, the D-Link FTP Server typically hosts the D-Link FTP How to Update Your Firmware Detail - cpe:2.3:o:d-link:dap-1360f1_firmware:6.10 - NVD

CPE Name Components Select a component to search for similar CPEs. Part: o Vendor: d-link Product: dap-1360f1_firmware Version: 6. National Institute of Standards and Technology (.gov) Index of /pub/Wireless/DAP-1360/Firmware - D-Link FTP

The D-Link DAP-1360 Firmware version 6.10 is primarily a maintenance and security release for the Hardware Revision F1 of the device. Key Features and Security Impact

While official "feature" lists for this specific version are sparse compared to major releases, its most significant attribute is its status in security reports:

Security Vulnerability (CVE-2021-44127): Firmware version 6.10 and earlier are known to contain a critical security vulnerability. This flaw allows an authorized attacker to execute arbitrary system commands via the file parameter in the webupg binary.

End of Life (EOL) Status: The DAP-1360 reached its End of Support life-cycle on August 20, 2020. This means D-Link has ceased regular firmware development for this model, and version 6.10 is one of the final legacy releases available for the F1 hardware.

Maintenance Fixes: Generally, the v6.xx branch for Rev. F1 addresses stability issues such as IPv6 setting fixes (introduced in earlier 6.08 builds) and general connectivity improvements. General DAP-1360 Device Capabilities

Regardless of the firmware version, the DAP-1360 supports seven distinct operation modes: Access Point: Acts as a central hub for wireless users.

Wireless Client: Connects the DAP-1360 to another access point.

Repeater/Range Extender: Extends Wi-Fi coverage to "dead" spots.

Bridge / Bridge with AP: Joins two wired networks or acts as both a hub and bridge.

WISP Client Router / WISP Repeater: Allows sharing a WISP (Wireless Internet Service Provider) connection without an extra router. Download & Installation

Because this device is End of Life, you should source firmware directly from official regional support portals to ensure you have the correct file for your specific hardware revision (Rev F1):

Official Global Resource: Check the D-Link Total Resource Page or the D-Link Australia Support for the most stable legacy files.

Update Process: Access your device's web interface (usually 192.168.0.1), log in, and navigate to Maintenance > Firmware Upgrade.

Note: Due to the critical vulnerabilities found in version 6.10 and earlier, it is highly recommended to replace the device with a newer model that still receives active security updates.

The D-Link DAP-1360 (specifically Hardware Revision F1) reached its End of Life (EOL) on August 20, 2020. While firmware version 6.10 exists, it is critical to note that it contains a high-risk security vulnerability (CVE-2021-44127).

D-Link has released a Hotfix (v6.14B01) to address these vulnerabilities. It is strongly recommended to use the latest hotfix instead of version 6.10. Firmware Download & Resources

Latest Security Hotfix (v6.14B01): Available on the D-Link Legacy Files Server.

Official Support Page: For older versions and release notes, visit the D-Link Australia Support portal.

Technical Manual: The DAP-1360 F1 Manual (v6.00) provides detailed hardware setup instructions. Update & Configuration Guide

Identify Hardware Revision: Ensure your device is Revision F1. You can find this on the sticker at the bottom of the device.

Download and Extract: Download the firmware zip file and extract the .img file to your computer. Access the Web Interface: Connect your PC to the DAP-1360 via an Ethernet cable. Open a browser and enter 192.168.0.50 (default IP). Log in using Admin with no password (default).

Upload Firmware: Navigate to the Maintenance or Tools tab, select Firmware Update, and upload the .img file.

Mandatory Factory Reset: D-Link recommends performing a factory reset after the upgrade to ensure the new configuration applies correctly. To do this, hold the Reset button for 10 seconds until the LED flashes. Critical Security Advisory

Firmware v6.10 and earlier versions are susceptible to remote code execution vulnerabilities. Because this product is EOL, D-Link recommends retiring it and replacing it with a modern router or access point that receives regular security updates. DAP-1360 - D-Link Support Resources

Download. DAP-1360. Download direct: https://files.dlink.com.au/products/DAP-1360. REV F. Software. No Software Available.pdf (22. D-Link Australia

In DLink DAP-1360 F1 firmware version <=v6.10 in ... - GitHub

D-Link DAP-1360 Firmware 6.10 is specifically associated with Hardware Revision F1 of the device. While this version (and earlier versions is less than or equal to

6.10) has been noted in security advisories for specific vulnerabilities, official downloads and update procedures are available through D-Link's support channels. Identifying Your Hardware

Before downloading, you must confirm your hardware version to avoid "bricking" the device. Check the Sticker

: Look at the label on the bottom of the device. It will list if this firmware is compatible with your unit. Port Check

: Revision F1 typically features two ports (WAN/Internet and LAN) and is distinct from earlier single-port versions like Revision B1. Download Sources

D-Link typically hosts firmware on regional FTP and support sites: Official FTP Server : Files for various revisions, including , are often hosted on the D-Link FTP Repository Regional Support D-Link Australia Support Page lists resources for

, including manuals that specifically mention version 6.00 and subsequent releases. Legacy Products : Note that the DAP-1360 is considered a legacy product

in some regions (like the US), meaning it may no longer receive regular updates beyond critical security patches. Installation Guide DAP-1360U - D-Link FTP

D-Link DAP-1360 Firmware 6.10: Technical Analysis and Deployment Guide

The D-Link DAP-1360 is a legacy Wireless N range extender/access point that has seen numerous hardware revisions over its lifespan. Firmware version 6.10 is a specific, significant release often associated with the Hardware Revision D1 (and sometimes E1 depending on regional sub-variants).

This guide provides a deep analysis of this firmware version, moving beyond simple download links to understand its architecture, feature set, and the critical safety procedures required for a successful flash.

2. Product Background

Dap-1360 Firmware 6.10 Download [work] 🆕 Safe

DAP-1360 Firmware 6.10 — Guida rapida al download e all'aggiornamento

Technical Report: DAP-1360 Firmware Version 6.10 Download

Report ID: DAP1360-FW-6.10
Date: [Current Date]
Subject: Availability, acquisition, and considerations for D-Link DAP-1360 Access Point firmware v6.10

Prerequisites:

  1. Hardwired Connection: Never flash over Wi-Fi. Connect a PC/Laptop directly to the DAP-1360 via Ethernet cable.
  2. Static IP: In some recovery scenarios, the device may default to 192.168.0.50. Setting your PC to a static IP in the 192.168.0.x range is recommended.
  3. Browser Compatibility: Use Internet Explorer, Firefox Legacy, or a browser that supports legacy TLS. Chrome often blocks the upload scripts of older D-Link UIs.

1. Security Patches (CVE Fixes)

The 6.10 update addresses several vulnerabilities discovered in older versions (6.04 and earlier), including:

Note finali

Vuoi che cerchi la pagina di supporto ufficiale D-Link per il DAP-1360 ora?

(Invoking related search suggestions.)

The D-Link DAP-1360 (Hardware Revision F1) firmware version 6.10 is currently identified as critically vulnerable and has been superseded by security patches. Because the DAP-1360 has reached its End of Life (EOL) as of August 2020, D-Link recommends replacing the device with a modern, supported model for continued security. Critical Security Status: Firmware 6.10

Firmware version 6.10 and earlier are affected by a significant vulnerability (CVE-2021-44127).

Vulnerability Type: Unauthenticated remote code execution or unauthorized access.

EPSS Score: 13.515%, indicating a high probability of exploitation within 30 days.

Recommendation: If you must continue using this device, you should bypass version 6.10 and immediately upgrade to the v6.15 Hotfix (specifically v6.15EUb01_Beta_Hotfix or later) to address known security flaws. Firmware Download and Support Resources

D-Link maintains legacy files for this product, though official development has ceased. You can find the latest available firmware and release notes at these official locations:

D-Link Support (Australia/NZ): Accesses downloads for Rev F, Rev C, and Rev B hardware.

D-Link Legacy Products Portal: Documentation and support for EOL hardware.

D-Link FTP Repository (Global/Russia): Direct access to firmware binary files (.bin or .img) for various hardware revisions. Update Instructions

Verify Hardware Revision: Check the sticker on the bottom of your device (e.g., Rev F1, C1, or B1). Firmware is revision-specific; installing the wrong version can "brick" the device.

Access the Interface: Connect to the device and enter http://192.168.0.50 (standard for APs) or http://dlinkrouter.local in your browser.

Upload Firmware: Navigate to Maintenance or Tools > Firmware Update. Upload the file downloaded from the official repository.

Factory Reset: D-Link strongly recommends performing a factory reset after upgrading to ensure the new configuration applies correctly. Index of /pub/Wireless/DAP-1360/Firmware - D-Link FTP Dap-1360 Firmware 6.10 Download

Turbocharge Your WiFi: A Guide to the D-Link DAP-1360 Firmware 6.10

Is your home WiFi feeling a bit sluggish lately? Before you go out and buy a brand-new router, there’s one simple, often-overlooked step that can breathe new life into your hardware: a firmware update. Today, we’re diving into the D-Link DAP-1360 and specifically looking at Firmware version 6.10 Revision F1 Why Firmware 6.10 Matters

Firmware is the "brain" of your access point. While version 6.10 is a stable release for the F1 revision, it is vital to keep your device updated to ensure peak performance and security. Vulnerability Protection

: Security researchers have previously identified vulnerabilities in older versions of this firmware

. Updating to the latest available version (like 6.10 or its subsequent hotfixes) is your first line of defense against network intrusions. Stability and Compatibility

: Firmware updates often resolve "IOT" issues with specific chipsets (like Broadcom or Atheros) and fix unstable connections when using tricky modes like Operating System Support

: Newer firmware helps your older hardware play nice with modern operating systems like Windows 7, 10, or 11 How to Download and Install

Ready to upgrade? Here is the quick-start guide to getting your DAP-1360 on the right track: Identify Your Revision

: Check the sticker on the bottom of your device. This firmware is typically for Revision F1 Download the File : You can find official firmware files through the D-Link Support Resources D-Link FTP Server . Look for the file ending in Access the Interface

: Plug your computer into the DAP-1360 via an Ethernet cable. Open your browser and type

To download firmware version 6.10 for the D-Link DAP-1360 (specifically for hardware Revision F1 ), follow the instructions below. Firmware Details & Compatibility Hardware Revision: This specific version is designated for Support Status: The DAP-1360 has reached its End of Life (EOL)

as of August 2020. D-Link no longer develops new firmware for this model, and version 6.10 is one of the final legacy releases. National Institute of Standards and Technology (.gov) Download Sources

Because this is a legacy product, official downloads are primarily found on D-Link's support and FTP servers: D-Link Support (Australia/Global): You can often find revision-specific downloads on the D-Link Australia Support Page D-Link US Legacy Portal Direct FTP Access: For older versions or specific revisions like F1, the D-Link FTP Server typically hosts the D-Link FTP How to Update Your Firmware Detail - cpe:2.3:o:d-link:dap-1360f1_firmware:6.10 - NVD

CPE Name Components Select a component to search for similar CPEs. Part: o Vendor: d-link Product: dap-1360f1_firmware Version: 6. National Institute of Standards and Technology (.gov) Index of /pub/Wireless/DAP-1360/Firmware - D-Link FTP

The D-Link DAP-1360 Firmware version 6.10 is primarily a maintenance and security release for the Hardware Revision F1 of the device. Key Features and Security Impact

While official "feature" lists for this specific version are sparse compared to major releases, its most significant attribute is its status in security reports: DAP-1360 Firmware 6

Security Vulnerability (CVE-2021-44127): Firmware version 6.10 and earlier are known to contain a critical security vulnerability. This flaw allows an authorized attacker to execute arbitrary system commands via the file parameter in the webupg binary.

End of Life (EOL) Status: The DAP-1360 reached its End of Support life-cycle on August 20, 2020. This means D-Link has ceased regular firmware development for this model, and version 6.10 is one of the final legacy releases available for the F1 hardware.

Maintenance Fixes: Generally, the v6.xx branch for Rev. F1 addresses stability issues such as IPv6 setting fixes (introduced in earlier 6.08 builds) and general connectivity improvements. General DAP-1360 Device Capabilities

Regardless of the firmware version, the DAP-1360 supports seven distinct operation modes: Access Point: Acts as a central hub for wireless users.

Wireless Client: Connects the DAP-1360 to another access point.

Repeater/Range Extender: Extends Wi-Fi coverage to "dead" spots.

Bridge / Bridge with AP: Joins two wired networks or acts as both a hub and bridge.

WISP Client Router / WISP Repeater: Allows sharing a WISP (Wireless Internet Service Provider) connection without an extra router. Download & Installation

Because this device is End of Life, you should source firmware directly from official regional support portals to ensure you have the correct file for your specific hardware revision (Rev F1):

Official Global Resource: Check the D-Link Total Resource Page or the D-Link Australia Support for the most stable legacy files.

Update Process: Access your device's web interface (usually 192.168.0.1), log in, and navigate to Maintenance > Firmware Upgrade.

Note: Due to the critical vulnerabilities found in version 6.10 and earlier, it is highly recommended to replace the device with a newer model that still receives active security updates.

The D-Link DAP-1360 (specifically Hardware Revision F1) reached its End of Life (EOL) on August 20, 2020. While firmware version 6.10 exists, it is critical to note that it contains a high-risk security vulnerability (CVE-2021-44127).

D-Link has released a Hotfix (v6.14B01) to address these vulnerabilities. It is strongly recommended to use the latest hotfix instead of version 6.10. Firmware Download & Resources

Latest Security Hotfix (v6.14B01): Available on the D-Link Legacy Files Server.

Official Support Page: For older versions and release notes, visit the D-Link Australia Support portal. Hardwired Connection: Never flash over Wi-Fi

Technical Manual: The DAP-1360 F1 Manual (v6.00) provides detailed hardware setup instructions. Update & Configuration Guide

Identify Hardware Revision: Ensure your device is Revision F1. You can find this on the sticker at the bottom of the device.

Download and Extract: Download the firmware zip file and extract the .img file to your computer. Access the Web Interface: Connect your PC to the DAP-1360 via an Ethernet cable. Open a browser and enter 192.168.0.50 (default IP). Log in using Admin with no password (default).

Upload Firmware: Navigate to the Maintenance or Tools tab, select Firmware Update, and upload the .img file.

Mandatory Factory Reset: D-Link recommends performing a factory reset after the upgrade to ensure the new configuration applies correctly. To do this, hold the Reset button for 10 seconds until the LED flashes. Critical Security Advisory

Firmware v6.10 and earlier versions are susceptible to remote code execution vulnerabilities. Because this product is EOL, D-Link recommends retiring it and replacing it with a modern router or access point that receives regular security updates. DAP-1360 - D-Link Support Resources

Download. DAP-1360. Download direct: https://files.dlink.com.au/products/DAP-1360. REV F. Software. No Software Available.pdf (22. D-Link Australia

In DLink DAP-1360 F1 firmware version <=v6.10 in ... - GitHub

D-Link DAP-1360 Firmware 6.10 is specifically associated with Hardware Revision F1 of the device. While this version (and earlier versions is less than or equal to

6.10) has been noted in security advisories for specific vulnerabilities, official downloads and update procedures are available through D-Link's support channels. Identifying Your Hardware

Before downloading, you must confirm your hardware version to avoid "bricking" the device. Check the Sticker

: Look at the label on the bottom of the device. It will list if this firmware is compatible with your unit. Port Check

: Revision F1 typically features two ports (WAN/Internet and LAN) and is distinct from earlier single-port versions like Revision B1. Download Sources

D-Link typically hosts firmware on regional FTP and support sites: Official FTP Server : Files for various revisions, including , are often hosted on the D-Link FTP Repository Regional Support D-Link Australia Support Page lists resources for

, including manuals that specifically mention version 6.00 and subsequent releases. Legacy Products : Note that the DAP-1360 is considered a legacy product

in some regions (like the US), meaning it may no longer receive regular updates beyond critical security patches. Installation Guide DAP-1360U - D-Link FTP

D-Link DAP-1360 Firmware 6.10: Technical Analysis and Deployment Guide

The D-Link DAP-1360 is a legacy Wireless N range extender/access point that has seen numerous hardware revisions over its lifespan. Firmware version 6.10 is a specific, significant release often associated with the Hardware Revision D1 (and sometimes E1 depending on regional sub-variants).

This guide provides a deep analysis of this firmware version, moving beyond simple download links to understand its architecture, feature set, and the critical safety procedures required for a successful flash.

2. Product Background

×
  • Create New...

Important Information

By using this site, you automaticly agree to our Guidelines and Privacy Policy.
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept