DIN EN 13155 is a harmonized European safety standard that specifies requirements for non-fixed load lifting attachments
used with cranes, hoists, and manually controlled handling devices
. Often referred to as "below-the-hook" equipment, these attachments are detachable and not a permanent part of the crane. iTeh Standards Core Requirements
The standard ensures mechanical safety through rigorous design and testing criteria: iTeh Standards Static Strength
: Mechanical load-bearing parts must withstand a static load of the Working Load Limit (WLL) without permanent deformation. Load Retention : In "test-only" scenarios, the attachment must hold
its nominal load without dropping it, even if permanent deformation occurs. Duty Cycles
: Fatigue verification is generally required only if the device is intended for more than 16,000 to 20,000 duty cycles Operational Range
: Components like lifting insert systems must be designed for temperatures between iTeh Standards Equipment in Scope
The standard provides specific safety guidelines for several categories of equipment: BSI Knowledge BS EN 13155:2020 | 31 Dec 2020 - BSI Knowledge
The DIN EN 13155 standard is a critical European safety regulation governing the design, manufacture, and verification of non-fixed load lifting attachments. These attachments—often referred to as "below-the-hook" devices—are essential components used with cranes, hoists, and manual load manipulators. Core Scope and Applications
The standard applies to detachable lifting equipment that can be used on various lifting appliances. It specifically mandates safety requirements for several categories of equipment:
Mechanical Attachments: Lifting beams (spreader beams), C-hooks, lifting forks, and clamps.
Vacuum Lifters: Including self-priming and non-self-priming (pump or turbine-driven) systems.
Lifting Magnets: Electric (battery or mains-fed), permanent, and electro-permanent magnets.
Concrete Systems: Lifting insert systems designed for use in normal-weight concrete. Essential Safety Requirements
DIN EN 13155 focuses on preventing mechanical failure and ensuring operational stability. Key mandates include: ANSI Webstorehttps://webstore.ansi.org
The DIN EN 13155 standard is a critical safety guideline for the design and use of non-fixed load lifting attachments used with cranes and hoists. It ensures that equipment like vacuum lifters, lifting beams, and magnets meet stringent mechanical and functional safety requirements to prevent accidents in industrial settings. Scope and Covered Equipment
This standard specifically applies to "non-fixed" attachments—detachable devices that connect a load to a crane but are not part of either the crane or the load itself. Major categories include:
Mechanical Grips: Plate clamps, lifting forks, C-hooks, and general clamps.
Suction and Magnetic Tools: Self-priming and non-self-priming vacuum lifters, as well as permanent, electric, and electro-permanent lifting magnets. Structural Elements: Lifting beams and spreader bars. din en 13155 pdf exclusive
Construction Systems: Lifting insert systems specifically for normal-weight concrete. Key Safety Requirements
The standard sets high bars for mechanical integrity and operational safety: EN 13155:2020/FprA1 - Non-fixed load lifting attachments
I can’t help find or provide pirated copies of standards (including DIN/EN documents). I can:
Which would you like?
Title: The Industrial Grimoire: Why the Internet is Obsessed with "DIN EN 13155 PDF Exclusive"
If you were to judge the importance of a document by the desperation of its search results, the standard DIN EN 13155 would be a bestseller.
A quick journey into the deeper corners of industrial forums, sketchy file-hosting sites, and LinkedIn comment sections reveals a fascinating micro-economy. It is a world where engineers, procurement managers, and safety inspectors hunt for a document that is legally dry but industrially vital. They are all looking for the same thing: the "PDF Exclusive."
But what is this standard, and why has the hunt for its digital copy become a strange, exclusive game of cat-and-mouse?
You might wonder, "Can I just use the summary from a forum?"
Consider this liability scenario: A vacuum lifter drops a 10-ton steel plate. The investigation asks: "Did your risk assessment account for Clause 5.2.4 – the response time for reserve vacuum?" Without the exclusive DIN EN 13155 PDF, you cannot prove you knew about that specific requirement. Your insurance is void. Your company is liable.
The "exclusive" in the keyword is not about elitism; it is about exclusivity of accuracy. The official PDF contains the mathematical models, the multi-lingual legal texts, and the authentic annexes that free versions strip away.
Invest in the official document. Read it alongside your equipment manuals. And lift with the confidence that you are compliant with the strongest safety standard on Earth.
Call to Action: Bookmark this guide. Order your official DIN EN 13155:2020+A1:2021 PDF today from your national standards body. Do not trust "free" when human lives are suspended in the air.
Disclaimer: This article is for informational purposes. Always refer to the official, purchased standard for legal compliance. The author is not liable for misuse of information based on unofficial summaries.
DIN EN 13155 is a comprehensive safety standard for non-fixed load lifting attachments used with cranes, hoists, and manual load manipulating devices.
The phrase "DIN EN 13155 PDF exclusive" typically refers to accessing the latest full version of the document, such as DIN EN 13155:2022-03 or the upcoming EN 13155:2020+A1:2025. Key Aspects of the Standard
Purpose: Prevents injuries by setting safety requirements for detachable attachments like beams, vacuum lifters, magnets, and clamps.
Requirements: Covers mechanical strength (typically 2x-3x WLL), fatigue for high-cycle use, and verification methods.
Exclusions: Does not cover slings, buckets, or equipment for explosive environments, as detailed in. Lifting Accessories DIN EN 13155 - zt-grassberger DIN EN 13155 is a harmonized European safety
The DIN EN 13155 standard is a critical safety document specifying requirements for non-fixed load lifting attachments used with cranes, hoists, and manually controlled load manipulating devices. The most current version is DIN EN 13155:2022-03, which implements the European version EN 13155:2020. Core Scope and Equipment
The standard covers a wide variety of detachable lifting equipment that is not permanently attached to the crane:
Plate Clamps: Used for gripping and lifting flat metal plates.
Vacuum Lifters: Including self-priming and non-self-priming types (pump or venturi).
Lifting Magnets: Electric (battery/mains), permanent, and electro-permanent models.
C-Hooks and Lifting Forks: Common in industrial and warehouse material handling.
Lifting Beams: Spreader beams used to balance and distribute load weights.
Concrete Inserts: Specifically lifting insert systems for normal weight concrete. Key Safety Requirements
To comply with the EU Machinery Directive (2006/42/EC), the standard establishes rigorous technical criteria: DIN EN 13155:2022-03 - NormSplash
DIN EN 13155 is the primary European safety standard for non-fixed load lifting attachments
used with cranes and hoists. These are "below-the-hook" devices that can be easily detached from a lifting machine, such as lifting beams, plate clamps, and magnets. Core Purpose and Scope
The standard provides a technical framework to ensure these attachments are designed, manufactured, and tested to prevent accidents caused by mechanical failure or load loss. Covered Equipment
: Plate clamps, vacuum lifters, lifting magnets (electric and permanent), C-hooks, lifting forks, lifting beams, and lifting insert systems. Safety Requirements : Specifies proofs for static strength elastic stability fatigue strength Exclusions
: Does not cover slings, ladles, buckets, or attachments for lifting people. Key Technical Specifications The current version, such as EN 13155:2020+A1:2025
, incorporates updated safety protocols and calculation methods.
The DIN EN 13155 standard is a critical European safety regulation governing the design, manufacture, and testing of non-fixed load lifting attachments used with cranes and hoists. Often referred to as "below-the-hook" equipment, these devices are detachable and can be used across various lifting appliances.
The latest version, DIN EN 13155:2022, incorporates major updates from the 2020 revision and the 2025 amendment (A1), specifically targeting mechanical safety and verification methods. Scope of DIN EN 13155
This standard applies to specific types of lifting attachments manufactured after its publication. Key equipment covered includes: Plate Clamps: Used for gripping and lifting steel plates.
Vacuum Lifters: Includes self-priming and non-self-priming (pump or turbine) systems. Summarize key points of DIN EN 13155 if you need an overview
Lifting Magnets: Covers electric, permanent, and electro-permanent magnets.
Lifting Beams and C-Hooks: Structural attachments for balancing or handling coils.
Lifting Forks and Clamps: Mechanical devices for palletized or bundled loads.
Lifting Insert Systems: Specifically for use in normal-weight concrete.
Important Exclusions: The standard does not cover slings, ladles, buckets, or container spreaders (which fall under EN 15056). It also excludes hazards from explosive atmospheres, noise, or the lifting of people. NEN-EN 13155 - Crane - Non-fixed load lifting attachments
DIN EN 13155 standard, titled "Cranes - Safety - Non-fixed load lifting attachments,"
specifies the safety requirements for removable lifting devices used with cranes and hoists. The current active version is DIN EN 13155:2020
(often referenced as DIN EN 13155:2022-03 in the German national implementation), which replaced the 2003+A2:2009 edition. ANSI Webstore Scope and Covered Equipment
The standard applies to detachable attachments that can be fitted to a crane hook or other lifting devices. Key covered items include: Clamping Devices: Plate clamps and other various clamps. Vacuum Lifters:
Both self-priming and non-self-priming (pump or venturi) types. Lifting Magnets:
Electric (battery or mains-fed), permanent, and electro-permanent magnets. Beams and Hooks: Lifting beams, C-hooks, and lifting forks. Lifting Inserts:
Specialized systems for lifting normal-weight concrete products. iTeh Standards Key Technical Requirements
The standard mandates rigorous mechanical safety factors to prevent load drops and structural failure: www.zt-grassberger.at
prEN 13155 rev - Non-fixed load lifting attachments - iTeh Standards
Scope and Purpose * Covers non-fixed lifting attachments such as: Plate clamps. Vacuum lifters (self-priming and non-self-priming) iTeh Standards Lifting Accessories DIN EN 13155 - zt-grassberger
Most free PDFs are from 2019. The A1 amendment updated:
An exclusive PDF is the only way to ensure you have Amendment 1 integrated, not as a loose errata sheet.
Use the diagrams from the exclusive PDF to create a safety poster. Focus on the "Forbidden use" icons (Clause 7.1): No shock loading, no side pulling, no use in explosive atmospheres unless approved.
Your ISO 9001 audit requires you to "identify and manage externally developed standards." A pirated PDF is a non-conformance. An exclusive, tracked PDF is evidence of due diligence.