Download Hpe Custom Image For Esxi 6.5 U3 Free

Downloading the HPE Custom Image for VMware ESXi 6.5 Update 3

requires navigating the Broadcom Support Portal, which replaced the old VMware Customer Connect site. This custom image is essential for HPE ProLiant and Synergy servers, as it includes specific drivers for storage and network controllers that the base VMware image lacks. Hewlett Packard Enterprise How to Download the HPE Custom Image Follow these steps to locate the 6.5 U3 image on the Broadcom Support Portal Hewlett Packard Enterprise

: Sign in with your registered credentials. Note that your account must have an active entitlement to view and download VMware products. Select Product : From the dropdown menu next to your username, select VMware Cloud Foundation Go to Downloads My Downloads on the left-hand navigation bar and search for VMware vSphere in the search box. Choose Version

: Click on the major version (e.g., vSphere 6.5) that matches your entitlement. Access Custom ISOs : Click the Custom ISOs tab. Under the OEM Customized Install CDs section, look for the "HPE Custom Image for ESXi 6.5U3". Verify & Download : Confirm the build identifier (e.g., oem-build-650.U3.10.4.5 for the Aug 2019 release) and click the download icon. Hewlett Packard Enterprise Key Considerations for ESXi 6.5 U3 VMware ESXi End of Life - Lansweeper 26 Aug 2025 —

Once upon a time, in the humid, low-humming heart of a corporate data center, there lived a ProLiant DL380 Gen10 named Unit 42.

Unit 42 was a workhorse, but he was feeling sluggish. His kernel was cluttered, and his drivers were ancient. He dreamed of the stability and grace of ESXi 6.5 Update 3, the "Golden Build" of his generation.

His guardian, a weary sysadmin named Elias, sat in the glow of a dual-monitor setup at 2:00 AM. Elias knew he couldn't just use a generic installer. To truly unlock Unit 42’s potential—to see the temperatures of his drives and the true speed of his Smart Array controllers—he needed the HPE Custom Image.

Elias navigated the labyrinth of the MyHPE Software Center. He bypassed the flashy, bloated new versions, searching for the specific ISO that contained the sacred VIBs (vSphere Installation Bundles) tailored for Hewlett Packard hardware.

Finally, he found it: VMware-ESXi-6.5.0-Update3-14990825-HPE-Gen9plus-650.U3.10.5.5.5-Jan2020.iso. download hpe custom image for esxi 6.5 u3

With a click, the download began. A blue progress bar crawled across the screen, a digital bridge being built between the clouds and the rack. When the download finished, Elias flashed the image to a thumb drive and walked into the cold aisle.

As the silver USB drive slid into Unit 42’s front port, the server’s fans let out a soft, anticipatory whine. The installation was seamless. No "Missing Driver" errors, no purple screens of death. When the reboot finished, Unit 42 didn't just boot; he soared. His sensors were calibrated, his management agents were reporting in perfect harmony, and for the first time in years, his health LED glowed a steady, tranquil green.

Elias leaned back, sipped his cold coffee, and watched the dashboard. The custom image had brought peace to the rack.

To download the HPE Custom Image for VMware ESXi 6.5 U3, you must use the Broadcom Support Portal

, which has replaced the VMware Customer Connect site. Direct links to specific images are no longer available due to the portal's architecture, so you must navigate manually through your account's product entitlements. Hewlett Packard Enterprise Download Instructions via Broadcom Support Portal : Access the Broadcom Support Site and log in with your registered credentials. Select Product

: Click the profile dropdown next to your username and select VMware Cloud Foundation Navigate to Downloads from the left-hand navigation. Search for VMware vSphere in the search bar. Select Version : Choose your entitled version (e.g., VMware vSphere – Enterprise ) and select the major version from the dropdown list. Access Custom ISOs Custom ISOs Look under OEM Customized Install CDs to locate the HPE Custom Image for ESXi 6.5 U3

Click the download link to obtain the ISO image or the Offline Bundle zip. Hewlett Packard Enterprise Key Image Features

The HPE Customized Image for ESXi 6.5 U3 includes specific drivers and management tools not found in the base VMware image: Hewlett Packard Enterprise Management Tools Downloading the HPE Custom Image for VMware ESXi 6

: Includes HPE CIM Providers, iLO Driver, and Integrated Smart Update Tool (iSUT). : Features tools like SSACLI, HPONCFG, and BOOTCFG. Device Drivers

: VMware IOVP Certified drivers for HPE storage and network controllers. Hewlett Packard Enterprise Important Support Information Download latest ISOs and patches for vSphere ESXi

To download the HPE Custom Image for VMware ESXi 6.5 Update 3, you must use the Broadcom Support Portal, which has replaced the legacy VMware Customer Connect site. Due to this migration, direct deep links to specific custom ISOs are no longer available. Download Instructions

Log in: Access the Broadcom Support Portal and sign in with your credentials.

Navigate to Products: Select VMware Cloud Foundation or the specific vSphere entitlement you hold.

Find ESXi: Search for vSphere and select the version you wish to download (6.5).

Select Custom ISOs: Under the "Primary Downloads" or "Custom ISOs" tab, filter by HPE to locate the custom images. Choose the Correct Image:

For Gen9 and newer: Use the image released around May 2021 (Build 17477841). The software is copyrighted and requires acceptance of

For Pre-Gen9 (Gen8 and older): Use the "Last Pre-Gen9" image released in December 2019 (Build 14990892). Key Details for ESXi 6.5 U3 HPE Custom Images Release Date Target Hardware Base Build Identifier May 2021 Gen9 / Gen10 / Synergy 650.U3.10.7.0.90 Dec 2019 Pre-Gen9 (Gen8 and older) 650.U3.9.6.10.1 Important Notes

I cannot directly provide a download link or file for the HPE Custom Image for ESXi 6.5 U3, because:

1. The software is copyrighted and requires acceptance of VMware/HPE license terms.
2. Direct file hosting is not permitted.
3. ESXi 6.5 U3 is end-of-life (EOL since November 2021) and may have security vulnerabilities.

However, I can give you a complete write-up on how to legally obtain it from official sources, including workarounds for EOL software.

Post-Install – Add HPE Management Components

The custom image already includes:

• hpe-smx-provider (Hardware monitoring)
• hpe-ams (Agentless Management Service)
• hpe-ssacli (Smart Array CLI)

Verify with:

esxcli software vib list | grep -i hpe

Steps to download an HPE-customized ESXi 6.5 U3 image (deep, actionable)

Warning: ESXi 6.5 is end-of-life; use only if you have a business requirement. For production, prefer a supported ESXi release.

Key Features of the ESXi 6.5 U3 HPE Image

The HPE Custom Image for ESXi 6.5 Update 3 includes several components optimized for HPE hardware:

• HPE Smart Array Drivers: Support for the latest generation of HPE RAID controllers (SAS/SATA/NVMe).
• HPE Ethernet Drivers: Optimized drivers for HPE FlexFabric and standard network adapters.
• HPE Sysinfo and CIM Providers: These allow the hypervisor to communicate with the hardware baseboard management controller (BMC/iLO) for health status reporting.
• HPE Tools: Utilities that allow for better integration between the ESXi kernel and HPE hardware architecture.

4) Alternative: HPE Software Delivery Repository / FTP / SPP

• HPE also bundles ESXi images into the Service Pack for ProLiant (SPP) and HPE Image Streamer content; check SPP or HPE Image Builder pages if you need multiple firmware/driver levels matched together.
• For scripted deployments, HPE provides OVA/VIB packages or offline bundles; download the relevant ZIP or offline bundle if you need ESXi offline bundles (VIBs) rather than ISOs.

5) Download from VMware (if HPE allows)

• If you don’t have HPE access but your environment allows, download VMware ESXi 6.5 U3 from VMware Customer Connect and then add HPE drivers separately (not recommended; risk mismatch).
• If customizing yourself, use VMware Image Builder or PowerCLI to inject HPE VIBs from HPE depot into the VMware ISO.

Option A – Use the HPE SPP (Service Pack for Proliant)

• Download SPP Version 2020.03.0 or earlier (includes ESXi 6.5 U3 image).
• From HPE Support Center → Search “Service Pack for Proliant” → Select older version.

Overview

The feature will allow users to download a custom ESXi 6.5 U3 image developed by Hewlett Packard Enterprise (HPE). This custom image includes HPE-specific drivers and modifications to ensure optimal performance on HPE servers.

For Linux/macOS:

sha256sum /path/to/your/HPE-ESXi-6.5-U3.iso

If hashes match, proceed. If not, redownload.