Drive Es Basic Maintenance V57 Download Install Work 〈2025〉
Drive ES Basic Maintenance V5.7 is the final version of the legacy Siemens engineering software used to integrate older drives (like MASTERDRIVES and SIMODRIVE 611) into STEP 7 V5.x environments. 📥 Download & Licensing
No Official Download: A complete download of the DVD is not provided by Siemens due to its large size (DVD format).
Physical Media: It is primarily distributed as a physical DVD (Part No: 6SW1700-5JA00-7AA0).
Individual Tools: While the full suite isn't downloadable, the individual commissioning tools it contains can often be downloaded separately for free as updates: DriveMonitor V5.5 SP2 SimoCom U V14.03.02 SimoCom A V05.05.04 🛠️ Installation Requirements
OS: Windows 10 (64-bit), Windows 7 SP1 (64-bit), or Windows Server 2016/2019.
STEP 7: Requires STEP 7 V5.5 SP2 or higher (up to V5.7) to be pre-installed.
Prerequisite: You must manually uninstall any existing versions of SimoCom U before starting the V5.7 installation. 🚀 Step-by-Step Guide
Preparation: Ensure your PC meets the Windows and STEP 7 version requirements listed above.
Cleanup: Use the Windows "Add or Remove Programs" tool to uninstall older versions of SimoCom U. Run Setup: Insert the DVD and run Setup.exe.
Integration: During installation, the software will link the Object Managers (OMs) to your STEP 7 environment, allowing you to configure drives directly from the HW Config.
License: If prompted, transfer the Floating License using the Automation License Manager.
⚠️ Note: Drive ES Basic Maintenance was discontinued in October 2023. For future-proofing, Siemens recommends moving these projects into a Virtual Machine (VM) to avoid compatibility issues with newer Windows updates.
💡 Key Takeaway: If you are using newer SINAMICS or MICROMASTER 4 drives, use the STARTER tool instead; it is free and includes the same integration features.
Which drive model (e.g., Masterdrives, Sinamics) you are trying to configure? Do you already have a STEP 7 version installed?
Are you trying to move an old project to a new Windows 10/11 PC? AI responses may include mistakes. Learn more
This guide is structured for use as a blog post, a technical documentation page, or a video script outline.
Step 3 – Verify Integration in STEP 7
- Open SIMATIC Manager.
- Go to Options → Manage Drive ES Basic.
- Should show “Licensed – V57” with green checkmark.
Conclusion
Downloading, installing, and maintaining Drive ES Basic v57 is a straightforward process when approached methodically. The key lies in pre-installation system cleaning, obtaining a legitimate installer from Siemens, following the setup steps with administrative rights, and performing post-install verification.
While this software is not new, its role in keeping industrial plants running is as critical as ever. By adhering to the maintenance guidelines in this article – from regular parameter backups to controlled Windows environments – you ensure that your drive engineering station remains reliable for years to come.
Last tip: Always keep a copy of this guide and the original installer in your maintenance toolbox. In the world of legacy automation, preparation is everything.
Need further assistance? Leave a comment below or visit the Siemens Industry Forum for community-driven support on Drive ES Basic v57. Always verify compatibility with your exact drive model before commissioning.
Keywords used: drive es basic maintenance v57 download install, Drive ES Basic v57, Siemens drive engineering, Step 7 drive integration, legacy drive software.
Drive ES Basic Maintenance V57: A Complete Guide to Download and Installation
Drive ES (Drive Engineering System) is the essential software interface for integrating Siemens drive technology into the SIMATIC automation world. Version 5.7 brings critical updates for compatibility with modern operating systems and enhanced communication protocols. This article provides a comprehensive walkthrough for finding, downloading, and installing Drive ES Basic Maintenance V57. Understanding Drive ES Basic V57
Drive ES Basic is primarily used for the commissioning, parameterization, and diagnostics of Siemens legacy and current drive systems. Unlike the "Starter" standalone tool, Drive ES Basic allows for full integration into the STEP 7 (Classic) Manager, enabling a unified data management system for both your PLC and drives. V57 is specifically designed to support: Windows 10 (64-bit) and Windows 11. Seamless integration with STEP 7 V5.7.
Secure communication for legacy Masterdrives, Simoreg, and Micromaster units. Pre-Installation Requirements
Before beginning the download, ensure your hardware and software meet the following specifications:
Operating System: Windows 10 Pro/Enterprise (64-bit) or Windows 11.
Base Software: SIMATIC STEP 7 V5.7 or higher must be pre-installed for full integration. drive es basic maintenance v57 download install
Hardware: At least 4GB of RAM (8GB recommended) and 2GB of free disk space.
User Rights: You must have Administrator privileges on the PC. How to Download Drive ES Basic Maintenance V57
Siemens software is typically distributed through the Siemens Industry Online Support (SIOS) portal.
Access the SIOS Portal: Navigate to the official Siemens support site.
Search for the Product: Enter "Drive ES Basic Maintenance V57" in the search bar.
Verify the Entry: Look for the "Updates" or "Download" category. Ensure the Entry ID corresponds to the V57 release.
Export Restrictions: Note that Siemens software often requires a login. You may need to complete an export-controlled software registration, which can take 24–48 hours for approval.
Download the ISO/ZIP: Once cleared, download the installation package (usually provided as a compressed .zip file or an .iso image). Step-by-Step Installation Process Follow these steps to ensure a clean installation:
Extract the Files: If you downloaded a .zip file, extract it to a short file path (e.g., C:\Downloads) to avoid "path too long" errors.
Run Setup: Locate the "setup.exe" file in the root folder. Right-click and select "Run as Administrator."
Language Selection: Choose your preferred installation language.
Compatibility Check: The installer will scan your system for STEP 7 V5.7. If it is not found, the "Integrated" features will be disabled.
Select Components: Ensure "Drive ES Basic" and the necessary drive catalogs (Masterdrives, Micromaster, etc.) are selected.
Finalize: Follow the on-screen prompts, accept the licensing terms, and restart your computer once the process is complete. Licensing and Maintenance
Drive ES Basic Maintenance V57 requires a valid Floating License.
License Key: Use the Automation License Manager (ALM) to transfer your license from the provided USB stick or via the Online Software Delivery (OSD) platform.
Updates: Periodically check the SIOS portal for "Hotfixes" or "Service Packs" (SP) specifically for V57 to maintain compatibility with the latest Windows security patches. Troubleshooting Common Issues
Version Conflict: If you have an older version of Drive ES (e.g., V5.5), you must uninstall it before installing V57.
Missing Integration: If the drives do not appear in the STEP 7 Hardware Catalog, go to "Options" > "Install New HW Updates" within STEP 7 and ensure the Drive ES packages are active.
Communication Errors: Ensure your PC/PG interface is correctly configured in the Control Panel to match your hardware (e.g., CP5711, PC Adapter USB A2).
By upgrading to Drive ES Basic Maintenance V57, you ensure that your Siemens drive engineering environment remains stable, secure, and fully compatible with the latest industrial computing standards.
To install and maintain Drive ES Basic Maintenance V5.7, you generally need to procure the software on physical media, as Siemens does not offer a full digital download for this specific version due to its size. 1. Download & Procurement
Availability: Drive ES Basic Maintenance V5.7 is officially provided only as a full version on DVD (Article No: 6SW1700-5JA00-7AA0).
Digital Exception: While the full suite isn't downloadable, individual integrated tools like DriveMonitor V5.5 SP2, SimoCom U, and SimoCom A can be downloaded separately as free updates for existing installations.
Licensing: It uses a Floating License for one user. If you purchased a license digitally, you can retrieve the key via the Siemens Automation License Manager (ALM). 2. Pre-Installation Requirements Before starting, ensure your system meets these criteria:
Operating Systems: Windows 10 (64-bit), Windows 7 SP1 (Professional/Ultimate/Enterprise), or Windows Server 2016/2019.
Required Base Software: You must have a full version of SIMATIC STEP 7 (V5.5 SP2 or higher) already installed; Drive ES Basic Maintenance V5.7 functions only as an option package and cannot be installed standalone. Drive ES Basic Maintenance V5
Preparation: Manually uninstall all previous versions of SimoCom U or SimoCom A before running the V5.7 setup to avoid conflicts. 3. Installation Steps
Mount or Insert Media: Insert the DVD or mount the ISO image.
Run Setup: Execute the SETUP.EXE file found in the root directory.
Component Selection: The installer will automatically integrate the DriveMonitor (for MASTERDRIVES/SIMOREG) and SimoCom tools into your STEP 7 environment.
Integrity Monitoring: During installation with STEP 7 V5.7 or higher, the system may prompt you regarding "monitoring the application integrity"—this is a standard security feature of the newer STEP 7 versions. 4. Maintenance & Discontinuation Notes SINAMICS STARTER - ID: 26233208 - Support - Siemens
Final Thoughts: Should You Still Use v57?
Drive ES Basic v57 is legacy software. Siemens ended mainstream support years ago. However, for factories running MASTERDRIVES or older MICROMASTER units, it remains irreplaceable. Modern alternatives like STARTER (standalone) or SINAMICS Startdrive cannot fully access all parameters of these classic drives.
If you are planning a long-term migration, consider upgrading your drives to SINAMICS. But until that day, Drive ES Basic Maintenance v57—properly downloaded and installed—is your most reliable companion on the shop floor.
Disclaimer: This guide is for educational purposes. Always follow Siemens’ official documentation and licensing terms.
Step 8 – Driver Installation (Windows Security Prompt)
During installation, Windows might ask to install "Siemens Drive ES Basic USB driver" or "PROFIBUS driver". Click Install or Trust this publisher.
Step 1: Where to Download Drive ES Basic v57 Legally
Important: Siemens has moved most legacy software to “Conditional Download” or paid support contracts. You cannot find v57 on the public Siemens support site without a valid login and a software support agreement (SSP).
Step 5: Post-Installation & Licensing
- Restart your PC when prompted.
- Open Automation License Manager (ALM) from the Start menu.
- Transfer license from a USB dongle (C2/blue key) or a license file.
- Without a valid license, Drive ES will run in demo mode (limited to 14 days or restricted parameters).
Part 3: Post-Installation & Verification
After the restart, you need to verify the installation was successful.
1. Check TIA Portal Integration:
- Open TIA Portal.
- Go to Project view.
- Check if the "Drive technology" section now allows you to add SINAMICS drives with the V57 version firmware parameters.
2. Check STARTER (Standalone):
- Search for "STARTER" in your Windows Start Menu.
- Open the application. Go to Help > About STARTER.
- Verify that the version displayed aligns with the Drive ES V57 package you installed.
3. License Check:
- Open the Automation License Manager.
- Navigate to the license key storage (usually the C: drive).
- Ensure you have transferred
Getting Started with Siemens Drive ES Basic Maintenance V5.7
If you are managing legacy Siemens drive systems, Drive ES Basic Maintenance V5.7 is the final version of the software package designed to help you maintain and diagnose older hardware like MASTERDRIVES and SIMOREG. Since its release in August 2021, it has served as a critical bridge for older systems, but it is important to note that the product has officially been discontinued as of October 2023.
Here is everything you need to know about downloading, installing, and managing this maintenance tool. What is Drive ES Basic Maintenance V5.7?
Drive ES (Engineering Software) Basic Maintenance is a toolset that integrates drives into the SIMATIC S7 hardware configuration using Object Managers (SlaveOM) instead of standard GSD files. This provides more convenient communication beyond network boundaries through routing. Key tools included in V5.7:
DriveMonitor V5.5 SP2: The core tool for MASTERDRIVES and SIMOREG systems. SimoCom U V14.03.02: For SIMODRIVE 611U and POSMO CA/CD/SI.
SimoCom A V05.05.04: Integrated for specialized drive maintenance. Download and Availability
Siemens does not offer a full download for Drive ES Basic Maintenance V5.7 due to the large memory space required for the DVD image.
Official Procurement: Historically, this was ordered as a physical DVD (MLFB: 6SW1700-5JA00-7AA0) with a 1-user floating license.
Discontinuation: Because it is discontinued, it is no longer listed in active catalogs. You may need to contact your local Siemens partner or customer service for replacement media or support.
Individual Tool Updates: While the full suite isn't downloadable, individual commissioning tools like DriveMonitor V5.5 SP2 can often be downloaded separately as free updates for existing installations. Installation Prerequisites
Before installing, ensure your environment meets these compatibility requirements: Delivery release for Drive ES Basic Maintenance V5.7
Drive ES Basic Maintenance V5.7 is a specialized engineering software package from Siemens designed for the maintenance and diagnostics of legacy drive systems, such as MASTERDRIVES www.industry-mobile-support.siemens-info.com Critical Download & Availability Notice No Direct Download
: Siemens does not offer a download for the full Drive ES Basic Maintenance V5.7 DVD due to its large file size. Total Discontinuation : The product was officially discontinued effective October 1, 2023 Step 3 – Verify Integration in STEP 7
. It is no longer listed in active catalogs and is primarily handled as a spare part under article number 6SW1700-5JA00-7AA0 Standalone Tool Downloads
: While the full suite isn't downloadable, individual components can be downloaded for free to upgrade existing installations from V5.4 SPx: DriveMonitor V5.5 SP2 Download 11769381 SimoCom U V14.03.02 Download 109751813 SimoCom A V05.05.04 Download 49345061 Installation Requirements Operating Systems : Supported on 64-bit versions of Windows 10 Pro/Enterprise Windows Server 2016 Windows Server 2019 Software Dependencies : Requires STEP 7 V5.5 SP2 or higher (specifically tested up to STEP 7 V5.7 HF3). Virtualization
: Because of software discontinuation and potential incompatibilities with newer Windows updates, Siemens recommends running this version within a Virtual Machine
(e.g., VMware Workstation Pro 16.1 or Microsoft Server 2019 Hyper-V) for long-term reliability. Installation Steps
Drive ES Basic Maintenance V5.7 is the final version of the software, and it is not available as a digital download
. Due to the large memory space required, it is only provided as a physical DVD (Article No. 6SW1700-5JA00-7AA0 Installation Prerequisites
Drive ES Basic Maintenance V5.7 functions as an option package for SIMATIC STEP 7; it cannot be installed as a standalone program. Software Requirements SIMATIC STEP 7 (V5.5 SP2 or higher must be pre-installed).
Supported for use with STEP 7 versions V5.5, V5.6, and V5.7. Operating Systems (64-bit) Windows 10 Pro / Enterprise. Windows 7 Professional / Ultimate / Enterprise SP1. Windows Server 2016 / 2019. Integration & Components
V5.7 is designed for the maintenance of legacy Siemens drives. It integrates the following tools directly into the STEP 7 environment: DriveMonitor V5.5 SP2 : Used for MASTERDRIVES and SIMOREG. SimoCom U V14.03.02 : Used for SIMODRIVE 611U and POSMO CA/CD/SI. SimoCom A V05.05.04 : Used for older SIMODRIVE units. Siemens SiePortal step7 V 5.7 SP1 and drive es tools - Siemens Support Portal
Siemens Drive ES Basic Maintenance V5.7 is the final iteration of this engineering software package, which has been officially discontinued and is now primarily available only as a spare part. 🛠️ Important Installation Requirements
Drive ES Basic Maintenance V5.7 is an option package for SIMATIC STEP 7. It cannot be installed as a standalone tool.
STEP 7 Requirement: Must have at least STEP 7 V5.5 SP2 installed.
Operating Systems: Supported on 64-bit Windows 10 Pro/Enterprise, Windows Server 2016, and Windows Server 2019.
Clean Slate: You must manually uninstall all previous versions of SimoCom U or SimoCom A before starting the V5.7 installation from the DVD. 💾 Download and Procurement
You cannot download the full Drive ES Basic Maintenance V5.7 package from the internet because of its large memory requirements.
Physical Media: It is only provided on DVD via a new order (MLFB: 6SW1700-5JA00-7AA0).
Individual Tool Updates: While the full package isn't downloadable, you can download the integrated tools separately to update an existing installation:
DriveMonitor V5.5 SP2: Available at Siemens Support ID 11769381.
SimoCom U V14.03.02: Available at Siemens Support ID 109751813.
SimoCom A V05.05.04: Available at Siemens Support ID 49345061. ⚠️ Critical Maintenance Warnings
Because development stopped in October 2023, you must be careful with future system updates.
Virtual Environments: Siemens recommends transferring projects to a virtual machine (VM) to avoid incompatibilities with newer Windows versions or STEP 7 updates.
Application Integrity: STEP 7 V5.7 includes a security feature called "monitoring the application integrity." If you encounter errors when opening projects, you may need to temporarily disable this in the SIMATIC Manager settings.
PCS 7 Users: Installing this version can cause a loss of CiR capability (Configuration in Run). You must check the "Check CiR Capability" in your HW-Config and may need a CPU STOP to reload data.
Do you need help with the specific STEP 7 version compatibility for your current project hardware?
Delivery release for Drive ES Basic Maintenance V5.7 - ID - Support
Option 2: Siemens License Manager & DVD Request
- If you own a V5.x license, use the License Key Transfer Tool to convert.
- Contact Siemens technical support to request a replacement DVD (part number: 6SW1700-5JA57-0AA0 – verify).