Driver May In Canon F151 300 Win 10 64bit <1080p 2026>

To download the correct 64-bit Windows 10 driver for the Canon F151300

, you should look for the driver under its consumer model name: the Canon LaserShot LBP3100B or . The " F151300

" is a regulatory product code and is rarely used on the official support pages. Download Links & Model Identification The

typically corresponds to one of two very similar laser printer models. Select the one that matches the name printed on the front of your device: Canon LaserShot LBP3100B : The exact match for product code . Canon Laser Shot LBP3000 : A common alternative for this product series. Official 64-bit Driver: You can download the LBP3000 CAPT Printer Driver (R1.50 Ver.3.30) for Windows 10 x64 directly from Canon Support Australia. Installation Steps

Disconnect the USB cable: Do not plug the printer into your computer until the installation software prompts you.

Download and Extract: Run the downloaded .exe file. It will often extract into a new folder with the same name.

Run Setup: Open the extracted folder and double-click setup.exe.

Connect Printer: When the wizard asks, connect the USB cable and turn the printer on. Driver May In Canon F151 300 Win 10 64bit

Manual Addition: If the automated setup fails, use the Windows Devices and Printers menu to "Add a printer manually," then select "Have Disk" and point it to the folder you extracted earlier. Troubleshooting Canon F15 1300 Printer Driver W7 - Facebook

The Canon F151300 is actually the regulatory model number for the Canon LaserShot LBP3000 or

. To get this working on Windows 10 (64-bit), you need the CAPT (Canon Advanced Printing Technology) driver. Required Driver for Windows 10 (64-bit)

You can find the official software on the Canon Support Page. Model Name to Search: LBP3000 or LBP3100B Driver Version: R1.50 Ver.3.30 (or newer) File Format: Usually an .exe self-extracting file Installation Steps

Disconnect the USB: Unplug the printer from your computer before starting the installation.

Download & Extract: Download the 64-bit driver and double-click the file to extract it into a new folder. Run Setup: Open the extracted folder and run Setup.exe.

Connect Printer: Follow the on-screen prompts; only plug in the USB cable when the installer specifically asks you to do so. To download the correct 64-bit Windows 10 driver

If the standard installer fails, you can try adding it manually through Windows Settings by selecting "Printers & Scanners" > "Add a printer or scanner" and pointing the "Have Disk" option to the folder you extracted.

[Windows 64bit] LBP3000 CAPT Printer Driver (R1.50 Ver.3.30)

Important note: There is no widely known "Canon F151" model. Most likely you mean the Canon imageCLASS MF3010 or a similar compact monochrome laser MF series (like MF150 series). If your device is actually a different number (e.g., MF3010, MF150), the steps remain the same. If "F151" appears on the device label, it may be a regional variant of the MF3010.

5. Common Causes of the "Driver May In" Error

| Cause | Solution | |-------|----------| | 32-bit driver on 64-bit OS | Re-download the correct x64 driver | | Corrupted download | Clear browser cache, download again | | Windows Update block | Run driver installer as Administrator | | Antivirus interference | Temporarily disable real-time scanning | | Old firmware on F151 300 | Update printer firmware via Canon’s support page |

Where to get the correct driver (Windows 10 64-bit)

  1. Go to Canon USA / Global support → Product: imageFORMULA F-151.
  2. Select Windows 10 (64-bit) as the operating system.
  3. Download the following:
    • Scanner Driver (ISIS/TWAIN) v. X.X – version 1.0.2.12 or newer is recommended for Win10 x64.
    • CaptureOnTouch V2 (64-bit) – for scanning interface.
  4. Important: Do NOT use Windows 7 64-bit drivers – they may work, but official Win10 64-bit drivers exist.

The 3-Step Fix for Windows 10 64-bit

After troubleshooting dozens of these, here is the only method that consistently works.

Q1: Is Canon F151 300 the same as Canon iR-ADV C350i?

A: In many regions (Asia Pacific, Middle East), yes. The drivers are interchangeable. Download the C350i driver if F151 isn't listed.

6. Step-by-Step Video-Like Walkthrough (Text Version)

Scenario: You have a Canon F151 300 connected via USB to Windows 10 64-bit. Where to get the correct driver (Windows 10 64-bit)

  1. Download the official UFR II v2.64 driver for Win10 x64.
  2. Extract the ZIP contents to C:\Canon_F151_driver
  3. Connect the printer via USB and power it on.
  4. Windows attempts auto-install → Fails with "Driver may be incomplete" (this is the error).
  5. Open Device Manager → Right-click the unknown device (yellow bang) → Update driver.
  6. Browse my computer for drivers → Let me pick.
  7. Have Disk → point to C:\Canon_F151_driver\64bit\CNLB0.inf
  8. Select Canon F151 300 UFR II → Ignore the "Driver may not be compatible" warning.
  9. Installation completes → Print a test page.

Troubleshooting Common Issues

1. "Driver is Unavailable" Error If you see this error, the existing driver might be corrupted.

2. Scanning is not working Printing and scanning drivers are sometimes separate.

3. Old Driver Conflict If you previously had this printer installed on an older version of Windows (like Win 7) and upgraded:

Important Identification Note

Before downloading, it is important to clarify the model name. "Canon F151 300" is the internal production code for the Canon imageCLASS MF3010.

When searching on the official Canon website, you likely will not find results for "F151 300." You must search for "MF3010" to find the correct software.

Step 1: Forget the "Canon" Driver—Think "Conexant"

Do not download the full Canon MF driver pack. Instead, we need the generic modem driver that Microsoft buried.

  1. Open Device Manager (Right-click Start button).
  2. Find the "Canon F151-300" under Other devices or Modems.
  3. Right-click it > Update driver > Browse my computer for drivers.
  4. Click Let me pick from a list of available drivers on my computer.