skip to main content
Merck Manual LogoMERCK MANUALConsumer Version

E-pos Tep-220mc Thermal Printer Drivers For Windows 10 〈2024〉

Title: Deep Review: E-POS TEP-220MC Thermal Printer Drivers for Windows 10

Introduction The E-POS TEP-220MC is a ubiquitous thermal receipt printer found in small retail setups, food trucks, and budget POS systems. While the hardware is generally considered reliable "workhorse" equipment for the price, the software side—specifically the Windows 10 driver experience—is often the bottleneck. E-pos Tep-220mc Thermal Printer Drivers For Windows 10

This deep review analyzes the driver availability, installation process, stability, and performance of the E-POS TEP-220MC on the Windows 10 architecture. Title: Deep Review: E-POS TEP-220MC Thermal Printer Drivers

1. Identifying Your Connection Type

Before installing drivers, confirm how the TEP-220MC connects to your PC: USB – Most common

  • USB – Most common. Plug-and-play often works with generic drivers, but full features require specific drivers.
  • Serial (RS-232) – Requires correct COM port settings.
  • Ethernet (LAN) – Requires network configuration and port monitoring.

7. Final Recommendations

  • Always download drivers from official E-pos support to avoid malware.
  • Keep a backup of the driver .inf and .sys files.
  • If you run a POS system (e.g., retail, restaurant), consider using OPOS drivers for better peripheral control (drawer, customer display).
  • For remote support, note the installed driver version: Right-click printer > Properties > Advanced > Driver.

Option C: Install via “Add Printer” (For serial or network)

  1. Go to Settings > Devices > Printers & scanners > Add a printer.
  2. Select “The printer that I want isn’t listed.”
  3. Choose “Add a local printer or network printer with manual settings.”
  4. Select port:
    • Serial: COM1, COM2, etc.
    • Ethernet: Standard TCP/IP Port, enter printer’s IP address.
  5. Click “Have Disk” → browse to extracted driver .inf file.
  6. Select “E-pos TEP-220MC” from the list and complete installation.

Issue 4: USB connection drops after sleep

Cause: Windows 10 USB selective suspend.

Fix:

  • Go to Control Panel > Power Options > Change plan settings > Change advanced power settings.
  • Find USB settings > USB selective suspend setting – set to Disabled.
  • Also, in Device Manager > Universal Serial Bus controllers > USB Root Hub > Properties > Power Management – uncheck "Allow the computer to turn off this device."