Empi 300pv User Manual Top ❲iPad LEGIT❳

The Empi 300PV is a multi-function electrotherapy device that combines NMES, TENS, High Volt (HV), and Interferential (IF) therapies into one portable unit. It features 13 pre-programmed regimens and allows for extensive clinical customization. Quick Setup Guide

Preparation: Insert 2 AA batteries. Clean and dry the skin in the treatment area.

Electrode Placement: Connect lead wires to the electrodes and place them on the skin as directed by your healthcare provider. Power On: Press the ON/OFF button. empi 300pv user manual top

Select Program: Press SETUP to choose between NMES (muscle strengthening) or High Volt (wound care/contractures). You can also use the body-area "Quick Select" button if applicable.

Adjust Intensity: Gradually increase the intensity for Channel 1 (CH1) and Channel 2 (CH2) until you reach a level that is strong but comfortable. Key Controls & Features The Empi 300PV Go to product viewer dialog

Program Lockout: Clinicians can lock up to three programs to ensure patient compliance at home. To unlock, typically press the down arrow button.

Compliance Monitoring: To view usage data, turn the device ON and immediately hold the PAUSE and PREV (back arrow) buttons simultaneously. Knee Osteoarthritis

Pause Button: You can temporarily stop stimulation without resetting your timer or parameters.

Custom Settings: For manual setup, you can adjust parameters like Pulse Rate (2–150 pps), Pulse Width (50–400 µs), and Ramp Time (0–5 seconds). Important Safety Precautions Quick Guide - Medi-Stim

Knee Osteoarthritis

Placement: One electrode above the kneecap (vastus medialis), one below the kneecap (tibialis anterior tendon). Use Channel 2 similarly on the other side of the knee.
Program: P2 or P4.

Controls & Indicators (common)

Power switch — on/off.
LEDs — e.g., green (normal), red (fault/overload), yellow (charging).
Display — voltage, frequency, battery status (if present).
Remote/auto transfer — optional remote switch inputs.

2. Mastering the Controls: The Top Knobs

The 300PV is designed for simplicity, but the manual emphasizes understanding the dual-channel controls:

Rate (Pulse Frequency): This knob controls how many pulses per second are delivered. For acute pain, the manual suggests a higher rate (90-100 Hz) for a "tingling" sensation. For chronic pain or muscle relaxation, a lower rate (2-10 Hz) is often preferred.
Width (Pulse Duration): This adjusts the "bite" of the pulse. A wider width creates a stronger, deeper sensation, while a narrower width is gentler on the skin.

4. The "Start Low" Protocol

The most common mistake users make is starting the intensity too high. The manual dictates a strict "Top" rule for starting a session:

Turn the channel knobs to OFF before connecting the lead wires.
Connect the electrodes to the skin first.
Turn the device ON, then slowly increase the intensity until you feel a strong but comfortable tingling. You should never feel a "prickling" or burning sensation.