Holiday Special: Telephone Plugin $39 ($99). Code HOLIDAY. Limited time.

Epson Et 2400 Reset Install

To reset and install your Epson EcoTank ET-2400 Go to product viewer dialog for this item.

, follow the steps below to clear network settings and perform a clean driver installation. 1. How to Reset Wi-Fi Settings

lacks an LCD screen, you must use a specific button combination to reset its network memory.

Power Off: Turn off the printer and wait for the power light to go completely dark.

Button Combination: Press and hold the Network (Wi-Fi) button and the Power button simultaneously for about 4–5 seconds.

Monitor Lights: Release the buttons once the network lights begin to flash. The lights will flash briefly and then stop. epson et 2400 reset install

Completion: When all lights turn off, the Wi-Fi settings are successfully reset. 2. How to Install (or Reinstall) Your Printer

For a fresh installation on a computer, it is recommended to download the latest software directly from the manufacturer rather than relying on generic OS drivers.

Download Drivers: Visit the Epson Support Page for ET-2400 and download the Drivers and Utilities Combo Package Installer.

Run Installer: Open the downloaded file. The installer will guide you through connecting the printer to your Wi-Fi network or via USB.

Smartphone Setup: For mobile devices, download the Epson Smart Panel app from the App Store or Google Play. The app can automatically find the printer once it is in setup mode (press and hold the Wi-Fi button for 4 seconds until lights flash). To reset and install your Epson EcoTank ET-2400

These videos provide visual walk-throughs for resetting Wi-Fi and completing the initial software installation: Epson EcoTank ET-2400: How to Reset the Wi-Fi Settings Printer Insider How to setup Epson ET 2400 Printer | Step by Step Guide Geek Squire

Method 2: Resetting via Epson Software (Windows/Mac)

If the button press doesn’t work, use the official Epson Firmware Updater or Maintenance Tool.

  1. Download Epson Software Updater from the official Epson support site.
  2. Connect your ET-2400 via USB or Wi-Fi.
  3. Open Epson Printer Settings or Epson Status Monitor.
  4. Look for “Maintenance” > “Ink Level Reset” or “Refill Confirmation.”
  5. Follow the on-screen prompts to confirm you have added ink.
  6. The software will command the printer to reset the counter.

Note: If your printer shows “Ink low” but the tank is physically full, do not use third-party resetter tools. They often break the ink flow sensor.

Step-by-Step Waste Ink Reset Install

Important: This process resets the counter only. It does not replace the physical pad. You will eventually need to replace or clean the pad to avoid ink leaking inside your printer.

Step 3: Connect Printer via USB

  1. Connect the ET-2400 to your PC using a USB cable.
  2. In the adjustment program, click Select (or “Specific adjustment”).
  3. Choose Model Name: ET-2400 and Destination: EUR or your region.
  4. Click OK.

Final Verdict

The Epson ET-2400 reset install is a straightforward but risky procedure. It’s essential for prolonging the printer’s life beyond its “official” service limits, especially for high-volume users. Always pair the reset with physical cleaning or replacement of the waste ink pads. When done correctly, it can restore full functionality and save the cost of a new printer. Method 2: Resetting via Epson Software (Windows/Mac) If

Disclaimer: Resetting counters not endorsed by Epson may void your warranty. Perform at your own risk.

Step 1: Prepare the Printer

  1. Turn on the printer.
  2. Open the front cover and remove the maintenance box (the black box on the right side inside).
  3. Replace it with a new one or clean the existing pads thoroughly and let them dry completely.
  4. Reinstall the maintenance box and close the cover.

When to Call a Professional

If after resetting you still see errors, or the printer leaks ink, contact an Epson repair center. Continuous resetting without maintenance can destroy the printhead and motherboard.

Step 4: Post-Reset Installation Check

After resetting, the printer will work again. However, you must:

  1. Open the printer’s rear cover.
  2. Remove the waste ink pad (small felt rectangle).
  3. Rinse it under cold water until the water runs clear.
  4. Dry it completely (24 hours) or replace it with a new pad.
  5. Reinstall the pad.

Warning: If you skip the physical pad cleaning, ink will eventually leak onto your desk or internal electronics.