It was a humid Tuesday night in Manila when Carlo’s printing shop hit a wall. His trusty Epson L1110, the workhorse that had printed a thousand school modules and last-minute invoices, blinked an ominous pattern: two red lights. Waste ink pad counter full.
A quick search on his phone, fingers trembling slightly: "epson l1110 resetter adjustment program".
The results were a labyrinth of sketchy YouTube links, driver download sites with flashing “DOWNLOAD NOW” buttons, and a forum thread from 2019 where a user named PinoyTechGod simply posted: “Use the AdjProg. Reset waste ink. Ignore the warnings.”
Carlo didn’t sleep. He found a file named AdjProg_Resetter_Epson_L1110.rar on a site that looked like it hadn’t been updated since Windows XP. He held his breath, double-clicked.
The program opened—a gray, no-frills window with broken English: “Adjustment Program for Epson L Series. Use at own risk. No warranty for dead head.”
He connected the printer via USB. The program detected it instantly: L1110 – Waste ink count: 100.3%. He clicked “Initial Setting,” then “Waste Ink Pad Counter.” A final warning popped up: “Are you sure? Resetter adjustment will void smile.” He clicked “OK.”
The printer whirred to life—not the gentle hum of printing, but a deep, mechanical clunk-chunk-whirrrr that sounded like it was coughing up a decade of regret. For three agonizing seconds, nothing. Then, the green light returned. Steady. Peaceful.
Carlo refreshed the counter: 0.0%. He printed a nozzle check. Perfect.
He leaned back, exhaled. The program wasn’t magic—it was a digital skeleton key, passed from technician to technician, a tiny rebellion against planned obsolescence. From that night on, Carlo kept a copy on a dusty USB stick labeled “L1110 – Do not lose.”
And every time the red lights blinked again—once every eight months—he’d whisper a thanks to PinoyTechGod, run the resetter, and keep the little printer that could alive for one more ream of paper.
Epson L1110 Adjustment Program , often called a "resetter," is a utility tool used to resolve "Service Required" errors when the printer's waste ink pad counter reaches its limit. While Epson officially recommends service by an authorised provider
, many users use this program to reset the counter to zero manually. Pre-Reset Requirements Disable Antivirus
: Most third-party resetters are flagged as false positives. You must temporarily disable Windows Defender's real-time protection or other antivirus software before downloading or extracting the file. USB Connection
: Ensure the printer is connected to your PC via a USB cable; wireless resets are generally not supported. Driver Check : Confirm that the correct Epson L1110 driver
is installed and the printer is "Ready" in your system settings. Step-by-Step Reset Procedure
The Epson L1110 Resetter Adjustment Program is a critical utility for owners of the Epson EcoTank L1110 who encounter the "Service Required" error. This error typically occurs when the printer's internal waste ink pads—designed to absorb excess ink during cleaning cycles—reach their maximum capacity according to the internal counter. Why You Need the Epson L1110 Resetter
Every Epson printer includes a "Waste Ink Pad Counter." Once this counter hits its limit, the printer will stop operating and display a message stating that a "printer's ink pad is at the end of its service life". epson l1110 resetter adjustment program
Preventing Downtime: The resetter allows you to manually zero out these counters, effectively "tricking" the printer into thinking the pads are new.
Cost Efficiency: Instead of paying for a professional service center repair, users can perform the reset themselves using this adjustment program. Step-by-Step Guide to Using the Adjustment Program
Follow these steps to reset your Epson L1110 successfully. Note that many users find it necessary to disable antivirus software temporarily, as these third-party tools are often falsely flagged as threats.
Preparation: Connect your printer to your PC via a USB cable (wireless resets are generally not supported for this model).
Launch the Program: Open the AdjProg.exe file. Some versions may require you to run as an Administrator.
Select Model: Click the "Select" button and choose "L1110" from the model name list. Set the Port to your specific USB port rather than "Auto Selection" for better reliability.
Enter Adjustment Mode: Click on "Particular Adjustment Mode".
Locate the Counter: Select "Waste ink pad counter" from the Maintenance list and click OK. Check and Initialize:
Check the boxes for "Main pad counter" and "Platen pad counter".
Click "Check" to see the current status (it will likely show 100%). Click "Initialize" to clear the counters.
Finalize: Once the program confirms the reset, click OK, turn your printer OFF, wait a few seconds, and then turn it back ON. Important Considerations and Safety
While the resetter clears the software counter, it does not physically clean the pads. How to reset epson L1110 with adjustment program
Write Feature (often labeled as Initialize Initialization ) in the Epson L1110 Adjustment Program is the critical final step that clears the Waste Ink Pad Counter
by writing a "zero" value back into the printer's internal memory (EEPROM).
This feature is used when the printer stops functioning and displays an error message such as "service required" or "ink pad at the end of its service life," indicating the internal pads are mathematically "full". How the Write/Initialization Feature Works
When using the adjustment program (also known as a "Resetter"), the process involves two distinct steps: It was a humid Tuesday night in Manila
: The program "reads" the current value from the printer to confirm it has reached 100% or its maximum limit. Initialize (Write) : This command sends an instruction to the printer to
the current counter value. It resets the stored number of prints back to 0%, allowing the printer to become operational again. General Resetting Procedure If you are performing a reset on the Epson L1110
, the standard workflow within the adjustment program is as follows: : Open the tool and select the model and the correct USB port. : Click on Particular Adjustment Mode and find the Waste Ink Pad Counter Tick the checkboxes for Main Pad Counter (and Platen Pad Counter if applicable). Initialize button. This is the "Write" action that clears the memory. Completion : A prompt will appear asking you to turn off the printer
. Once restarted, the "service required" error should be gone. Further Exploration
Learn how to identify if your printer is at its limit with this guide on interpreting ink pad service messages Watch a step-by-step demonstration of the Adjustment Program reset process Explore the hardware side of this issue and learn how to clean or replace physical waste ink pads HOW TO RESET EPSON L3210 PRINTER
This guide explains how to use the Epson L1110 Adjustment Program
(often called a "resetter") to clear "Service Required" errors caused by a full waste ink pad counter. Prerequisites & Preparation Disable Antivirus : Many antivirus programs and Windows Defender
misidentify adjustment tools as threats. You may need to disable real-time protection before downloading or running the program. USB Connection Only
: The reset process generally fails over Wi-Fi. Ensure your printer is connected directly to your computer via a Driver Check : Confirm that the correct Epson L1110 driver is already installed on your PC. Step-by-Step Reset Procedure Extract the Files
: Use a tool like WinRAR or 7-Zip to extract the downloaded resetter archive. Open the Program : Right-click AdjProg.exe and select Run as Administrator Select Printer from the Model Name dropdown. Set the Port to Auto Selection (or the specific USB port your printer is on) and click Enter Adjustment Mode : Click on the Particular Adjustment Mode Locate Counter : Find and select Waste ink pad counter from the Maintenance list, then click Check and Initialize Check the boxes for Main pad counter Platen pad counter
to verify the current percentage (usually 100% when "Service Required" appears). Re-check the boxes and click Initialize to reset the counter.
: A pop-up will ask you to turn off your printer. Power it down, click
on the screen, then turn the printer back on to complete the reset. Troubleshooting Common Errors Communication Error
: If the program can't find the printer, check your USB cable, try a different port, or ensure no other print jobs are in the queue. Query Rejected
: This often happens if the printer is not connected via USB or if the software version does not exactly match your printer model. Hardware ID/License Errors
: Some versions require a license key. You may need to copy your Hardware ID Step 6: Access the Reset Menu
into a provided "Keygen" or "License Manager" to generate a valid license.key file for that specific PC. Important Maintenance Note How to Reset Epson L3250 Using Resetter Adjustment Program
To reset the waste ink pad counter on your Epson L1110 using the Adjustment Program (Resetter), follow these steps. This process is typically used when the printer displays a "Service Required" message or the ink pad lights are blinking. Preparation
Disable Antivirus: Many antivirus programs (including Windows Defender) flag the resetter as a false positive. You must temporarily disable real-time protection before downloading and extracting the files.
Extract Files: Use a tool like WinRAR to extract the downloaded resetter folder. Step-by-Step Reset Procedure
Launch the Program: Right-click AdjProg.exe and select Run as administrator. Select Printer Model: Click the Select button. Set Model Name to L1110.
Set Port to the specific USB port your printer is connected to (avoid "Auto Selection" if possible for a more stable connection). Click OK. Enter Adjustment Mode: Click on Particular Adjustment Mode.
Find Waste Ink Counter: From the list, select Waste ink pad counter and click OK. Check Counter Status:
Check the boxes for Main pad counter and Platen pad counter (if available).
Click the Check button to see the current usage percentage. If it shows 100%, a reset is necessary. Initialize the Reset:
Ensure the same boxes (Main pad counter, etc.) are still checked. Click the Initialize button. A prompt will appear; click OK to confirm. Finalize: The program will ask you to turn off the printer. Turn the printer off, then click OK on the computer screen.
Turn the printer back on. The error light should now be gone. Important Maintenance Note
Resetting the software counter does not physically clean the ink pads. Epson recommends replacing the absorbent ink pads or installing an external waste ink tank to prevent physical ink overflow after a reset.
Disclaimer: This guide is for educational purposes. Using third-party adjustment programs can void your printer warranty and carries a risk of damaging the device if used incorrectly. Always try official Epson support channels first.
Adjustment programs modify printer firmware counters. Some antivirus software flags this as suspicious. Disable Windows Defender or any third-party AV for 10 minutes.
Some versions ask for a “Destination ID.” Use these common codes:
ID 33 (or leave blank)ID 231234 or 0000.Before downloading, understand what this tool can and cannot do:
| Feature | Status | |---------|--------| | Reset waste ink pad counter | ✅ Yes | | Reset "Paper Out" errors | ❌ No (that's a hardware issue) | | Fix paper jams | ❌ No | | Unblock clogged nozzles | ❌ No (use head cleaning instead) | | Work on Windows 11/10/8/7 | ✅ Yes | | Work on macOS | ❌ Very limited (Windows only mostly) | | Require a USB cable | ✅ Yes |