Epson L4150 L4160 L4170 Resetter Adjustment Program Exclusive [CERTIFIED]

Ultimate Guide to the Epson L4150, L4160, and L4170 Resetter Adjustment Program

If your Epson L-Series printer has suddenly stopped working with a "Service Required" message or flashing red lights, you likely need a Waste Ink Pad reset. This guide covers everything you need to know about the Epson L4150, L4160, and L4170 Resetter Adjustment Program, a specialized tool used to clear internal counters and restore printer functionality. What is the Epson Adjustment Program?

The Epson Adjustment Program (often called a "Resetter") is model-specific service software designed for maintenance and internal counter management.

Modern printers like the L4150, L4160, and L4170 use internal sponge pads to collect excess ink during cleaning cycles. Once the printer's firmware determines these pads are full—based on a "Waste Ink Pad Counter"—it locks the printer to prevent ink from overflowing and causing damage. Key Features of the Resetter

Waste Ink Pad Counter Reset: Clears the count back to 0% so you can continue printing.

EEPROM Initialization: Resets the printer’s memory to factory defaults.

Print Head Cleaning: Triggers deep cleaning cycles more intensive than the standard user menu.

Ink Charge: Forces ink through the system after a repair or long period of inactivity. How to Use the L4150, L4160, & L4170 Resetter

To successfully reset your printer, follow these specific steps: Ultimate Guide to the Epson L4150, L4160, and

Preparation: Ensure your printer is connected to a Windows PC via a USB cable. This software generally does not work over Wi-Fi.

Launch Software: Run the AdjProg.exe file. If prompted, select your specific model (e.g., L4160) from the menu. Enter Maintenance Mode: Click on Particular Adjustment Mode.

Select Waste ink pad counter from the Maintenance tab and click OK. Check & Initialize:

Check the boxes for "Main pad counter" and click Check to see the current percentage.

Once confirmed, click Initialize. A pop-up will ask for confirmation; click OK.

Restart: When the program displays "Please turn off the printer," power off your device, wait 10 seconds, and turn it back on. Your red light error should now be gone. Troubleshooting Common Reset Issues

Communication Error: Usually caused by a loose USB cable or the printer being in the middle of a print job. Clear all pending documents before trying again.

Anti-Virus Interference: Many antivirus programs flag adjustment tools as "false positives." You may need to temporarily disable your protection to run the utility. If your printer is under warranty: Do not use the resetter

Physical Pad Replacement: Resetting the software does not physically clean the sponges. If you reset the counter multiple times without replacing the ink pads, ink may eventually leak from the bottom of the printer. Exclusive Tips for L-Series Owners

Manual Cleaning: For minor streaks, you can manually trigger a head cleaning by holding the Cancel button for 3 seconds until the power light blinks.

Mobile Printing: After resetting, you can resume using the Epson Print Enabler for Android or AirPrint for iOS.

You can find official manuals and drivers on the Epson Support Page.

Fix "Service Required" Errors: Epson L4150 Resetter Guide If your Epson EcoTank printer has suddenly stopped working, flashing its red indicator lights while displaying a message that the "ink pad is at the end of its service life," you are likely dealing with a waste ink pad counter overflow. This is a built-in safety feature designed to prevent ink from leaking out of the internal collection pads and damaging your hardware.

The Epson Adjustment Program (commonly called a resetter) is the exclusive diagnostic utility used to reset these internal counters to zero, allowing you to resume printing immediately without an expensive trip to a service center. Why Use the Resetter?

Restores Functionality: Unlocks your printer so it can function again after reaching its predefined print limit.

Deep Cleaning: Includes "Initial Ink Charge" functions to clear stubborn clogs in the printhead that standard cleaning cycles can't fix. C. Legal and Compliance Issues

Maintenance Tools: Provides access to advanced settings like EEPROM initialization, Head ID settings, and Bi-D adjustments. How to Use the Adjustment Program

To use the resetter, you typically need a Windows PC (XP through Windows 11) and a direct USB connection, as these tools generally do not work over Wi-Fi.

Alternative: Replacement vs. Resetter

  • If your printer is under warranty: Do not use the resetter. Send it to Epson.
  • If the printer is 3+ years old: Use the resetter. The cost of official repair ($150+) is more than a new EcoTank ($199).
  • If you print 500+ pages monthly: Install a simple waste ink bottle mod (external tank) and use the resetter monthly.

3. Key Use Cases & "Why it is needed"

C. Post-Repair Adjustments

  • After replacing a print head, paper sensor, or logic board, the printer needs calibration. This program performs the necessary initialization.

3. Risks and Security Concerns

Obtaining and using these "exclusive" or cracked resetters carries substantial risks:

A. Security Threats (Malware/Viruses) Because these files are typically hosted on file-sharing sites, torrent networks, or forums, they are prime vectors for malware.

  • Trojan Droppers: Many cracked resetters trigger antivirus alerts (e.g., Trojan.Generic). While sometimes these are false positives due to the packing software used to crack the program, they often hide real threats such as cryptocurrency miners or data stealers.
  • Bloatware: Installers frequently bundle unwanted software or browser hijackers.

B. Hardware Damage

  • Bricking: Using the wrong version (e.g., using an L4150 resetter on an L4170) can corrupt the firmware EEPROM (Electrically Erasable Programmable Read-Only Memory), rendering the printer unusable ("bricked").
  • Ink Overflow: Resetting the counter does not physically empty the waste ink pads. If the pads are full and the counter is reset without replacing or cleaning the pads, ink will eventually overflow onto the user's desk and damage internal components.

C. Legal and Compliance Issues

  • Distributing or using cracked software violates copyright laws and Epson’s End User License Agreement (EULA).

What is the Resetter Adjustment Program?

The Epson L4150 L4160 L4170 Resetter is a utility software used by technicians and advanced users to access the printer's firmware settings. It allows you to reset the waste ink pad counters back to zero.

Key Features of the Adjustment Program:

  • Waste Ink Pad Counter Reset: The primary function—clearing the "Service Required" error.
  • Head Cleaning: Performs deep cleaning cycles that aren't available in the standard driver.
  • Ink Charge: Re-primes the ink lines (useful after replacing ink tubes).
  • Paper Feed Adjustment: Calibrates paper feeding to fix alignment issues.
  • ID and Check: Checks the current status of the printer's hardware.

Why Look for an "Exclusive" Version?

When searching for a resetter, you will find many broken links or files that require purchasing an activation key. An "Exclusive" version typically refers to a pre-cracked or fully functional version of the software that requires no hardware key (dongle) or payment per use.

This is highly sought after because official Epson adjustment programs are usually restricted to authorized service centers. Independent repair technicians and DIYers need accessible tools to maintain these printers affordably.

Scroll to Top