The FirstChip FC1178/FC1179 MpTools v1.0.5.2 is a mass production (MP) utility used for repairing, formatting, and managing USB flash drives equipped with FirstChip controllers. Key Features and Use Cases
Controller Support: Specifically designed for FC1178 and FC1179 series chips.
Firmware Repair: Often used to fix "Write Protected," "Disk is Full," or "Please Insert Disk" errors that standard Windows formatting cannot resolve.
Capacity Restoration: Helps in restoring the original capacity of a drive or identifying fake-capacity flash drives.
Low-Level Formatting: Performs deep formatting to bypass corrupted sectors or logical errors. Common Download Sources
While there is no "official" consumer website for FirstChip, these tools are typically hosted on specialized firmware repositories:
USBDev.ru: A highly reliable database for USB controller tools. Look for the "MpTools" section under FirstChip.
FlashDrive-Repair.com: Frequently updates links for mass production tools and provides tutorials on how to use them.
FlashBoot.ru: Another major repository for iFlash and MP utilities. Basic Usage Instructions
Check Hardware: Use a tool like ChipGenius to verify that your USB drive actually uses the FirstChip FC1178 or FC1179 controller.
Run as Admin: Extract the .zip or .rar file and run MpTool.exe with Administrator privileges.
Refresh/Start: Insert your drive, click Refresh (or "Enumerate") to see the device, and then Start to begin the repair process.
Caution: Using these tools will erase all data on the USB drive. Ensure you have backed up any important files before proceeding.
Because this software is often bundled with adware or viruses on third-party hosting sites, follow this exact protocol.
The v1052 tool requires disabling Driver Signature Enforcement on Windows 10/11. FirstChip uses unsigned proprietary drivers.
FirstChip MPTools v1052 on sites like usbdev.ru or flashboot.ru. Look for a package name like FirstChip_MpTools_20190228_v1052 or similar.The combination of FirstChip FC1178 / FC1179 controllers and MPTools v1052 has saved millions of USB flash drives from the trash. While the tool looks intimidating (a Windows XP-era interface with cryptic Japanese/English text), the process is straightforward:
firstchip fc1178 fc1179 mptools v1052 free on USBDev.ru).For most users, this will restore a 32GB drive that was showing "0 MB" back to full health. Remember to back up your data regularly – MPTools is a repair tool, not a data recovery tool.
Have a successful repair story? Share your VID/PID combo in the comments below, and help others with the exact same FirstChip controller.
Disclaimer: Modifying USB firmware can void warranties and potentially damage hardware. This article is for educational purposes. Always make a backup before running MP Tools.
FirstChip FC1178 and FC1179 chips are widely used in budget-friendly USB flash drives. When these drives experience write protection, capacity loss, or connection errors, the FirstChip MpTools V1052 is the specialized software required to repair and reformat the controller. firstchip fc1178 fc1179 mptools v1052 free
This guide provides a comprehensive walkthrough on how to download, set up, and use this specific version of the utility to revive your USB storage device. Understanding FirstChip FC1178 and FC1179
The FirstChip FC1178 and FC1179 are USB 2.0/3.0 flash drive controllers. They are popular among manufacturers for their cost-effectiveness but are prone to firmware corruption if the drive is unplugged incorrectly or during a power surge.
The V1052 version of the Mass Production Tool (MpTools) is specifically optimized to recognize these chipsets and flash the correct firmware to restore factory settings. Prerequisites for Using MpTools
Before starting the recovery process, ensure you have the following ready:
A Windows PC (Windows 7 or 10 is recommended for driver compatibility).
The corrupted USB drive plugged directly into a motherboard USB port (avoid USB hubs). The FirstChip MpTools V1052 software package.
ChipGenius or Flash Drive Information Extractor to verify your controller is indeed an FC1178 or FC1179. How to Use FirstChip MpTools V1052
Verify Your Hardware: Run ChipGenius while your USB is plugged in. Look for "Controller Vendor: FirstChip" and "Controller Part-Number: FC1178" or "FC1179." If the numbers do not match, this tool may not work.
Launch the Software: Extract the V1052 ZIP file and run the executable (usually named FirstChip_MpTools.exe) as an Administrator.
Detection: Once the interface opens, click the "Refresh" button. Your USB drive should appear in one of the numbered slots. If it doesn't appear, you may need to try a different USB port or check your device manager for "Unknown Device" errors.
Configuration (Optional): Click on "Settings." Usually, no password is required (leave it blank or try "123456"). Here, you can change the Disk Name, Serial Number, or set the drive to "High Level Format" for a quick fix or "Low Level Format" for a deep repair of bad blocks.
The Repair Process: Press the "Start" button on the main screen. The software will begin flashing the firmware and testing the NAND flash memory.
Completion: When the status bar turns green and displays "OK" or "Pass," the process is complete. Unplug the drive and plug it back in to see if Windows recognizes it as a fresh, empty volume. Troubleshooting Common Errors
No Device Found: Try the "Test Mode" method. This involves carefully shorting two pins on the flash chip while plugging it in to force the controller into a programmable state.
Write Fail: This usually indicates the NAND flash memory chips are physically damaged.
Wrong Flash: Ensure you are using the V1052 version, as older versions might not support the specific memory chips attached to your FC1179 controller. Important Safety Note
Using MpTools will permanently erase all data on the USB drive. This tool is a last resort for hardware that is otherwise unusable. Always ensure you have downloaded the software from a reputable firmware archive to avoid malware.
MPTools (Mass Production Tools) are essential utilities for repairing and recovering USB flash drives that use these specific controllers. Version
is a stable release used to fix issues like "No Media," "Write Protected," or "Unrecognized Drive". Key Features of MPTools V1.0.5.2 Controller Support : Fully supports FirstChip controllers including Firmware Recovery The FirstChip FC1178/FC1179 MpTools v1
: Capable of flashing fresh firmware to corrupted USB drives. Scan and Repair
: Performs deep scanning to detect and bypass bad memory blocks, restoring the drive to a usable state. Capacity Restoration
: Helps in correcting fake capacity or recovering lost storage space. Step-by-Step Repair Guide Extract the Archive : Download and unzip the MPTools package. Launch the Tool FCMpTools.exe
(run as Administrator if needed). When the "Product Type" window appears, keep the default settings and click Change Language
: Look for the "Language" category in the right column and switch it to for easier navigation. Identify Drive
: Plug in your USB drive. The tool should automatically detect it. Start Repair : Click the
button. The process may take anywhere from 10 minutes to over an hour depending on the drive size (e.g., 16GB may take ~1 hour). Verification
: Once the process finishes, the drive should re-mount in Windows and show the correct capacity. Important Safety Tips : This process will permanently delete
all data on the USB drive. Ensure you have backups if the data is accessible. Verify Controller : Use a tool like ChipGenius
to confirm your USB drive uses a FirstChip controller (FC1178/FC1179) before attempting to flash firmware. download link from a reputable archive, or do you need help identifying your specific flash drive controller first?
Восстановление флешки на контроллере FC1178/FC1179
The FirstChip FC1178/FC1179 MPTools V1052 is a specialized mass production (MP) software utility used for repairing, formatting, and managing USB flash drives powered by FirstChip controllers. It is primarily used to fix "Write Protected," "No Media," or "Unknown Device" errors. Quick Technical Summary
Controller Support: FC1178, FC1179, and associated variants. Version: MPTools V1052.
Primary Function: Low-level formatting and firmware flashing.
Status: Freeware (Distributed via technical community forums). Key Features & Capabilities
Flash Drive Restoration: Recovers drives that appear "unreadable" or "RAW" in Windows Disk Management.
Capacity Adjustment: Allows for the modification of the reported storage size (often used to restore "fake" capacity drives to their true physical size).
Bad Block Management: Scans the NAND flash for physical errors and marks "bad blocks" to prevent data corruption.
CD-ROM Partitioning: Enables the creation of a "Read-Only" or "USB-CDROM" partition for bootable software deployment. Standard Recovery Workflow Where to find: Search for FirstChip MPTools v1052
Identification: Use a tool like ChipGenius to confirm the controller is indeed a FirstChip FC1178 or FC1179.
Configuration: Open MpTools.exe. If the drive is detected, it will appear in one of the status slots.
Settings (Binning): Users typically select "High Level" for quick fixes or "Low Level" for deep scans of damaged memory chips.
Execution: Clicking "Start" initiates the flashing process. Warning: This will permanently erase all data on the drive. Important Safety Considerations
Data Loss: Using MPTools is a destructive process; any files currently on the device will be unrecoverable.
Risk of "Bricking": Selecting the wrong firmware version or settings can render the USB drive permanently unusable.
Source Integrity: Since this software is not distributed through a primary consumer website, ensure you are downloading from reputable technical repositories (like USBDev or FlashDriveDB) to avoid malware. How to use ChipGenius to verify your hardware? Common error codes encountered during the "Start" process?
FirstChip FC1178/FC1179 MpTools V1.0.5.2 is a specialized mass production (MP) and repair utility designed for USB flash drives using FirstChip controllers. It is primarily used to restore corrupted drives, fix "write-protected" errors, and correct fake capacity issues where a drive displays more storage than it physically possesses. Key Features and Updates
Version 1.0.5.2 (released June 2022) includes several optimizations for newer hardware: Controller Support : Specifically supports (variants like AB, BC, E, S) and the more modern FC1179/FC1179S controllers. Flash Compatibility
: Improved support for 3D Flash stability and speed, as well as enhanced yield for MLC (Multi-Level Cell) open card operations. Issue Resolution
: Fixes problems with double-pasted chips and slow flash speeds. Legacy Support
: Resolves identification issues on older systems like Windows XP, including blue screen errors during functional disk operations. Usage and Settings
The tool is often downloaded for "factory resets" of USB drives. Notable technical details include: : The default interface is often Chinese, but an
option is typically available in the top-right menu or side panel.
: When prompted for a password to access settings, users generally leave the field and click "OK". Scan Levels
: For standard repairs, "Standard Scan" is used; for deeper issues or resetting fake drives to their true capacity, "Factory Scan" or "Clear" may be required. Availability This software is provided as a
utility and is commonly hosted on technical repositories such as
. Because it interacts with low-level hardware firmware, it does not require installation and can be run directly from its executable after extraction. step-by-step guide on how to use this tool to fix a specific USB error? FirstChip FC1178/FC1179 MpTools V1.0.5.2 (2022-06-01)