Firstchip Fc1179 Firmware Link !full!

If your USB drive is showing errors like "No Media," "Write Protected," or "0MB Capacity," it likely uses a FirstChip FC1179 controller

. To fix this, you need a "Mass Production Tool" (MpTools) rather than a simple driver update. Latest Firmware Links

The most reliable source for these specific Chinese controller tools is USBDev.ru, which maintains an archive of various versions: Main Download Page: FirstChip FC1179 MpTools (USBDev.ru) Version V1.0.7.2 (Feb 2024): This is one of the most recent stable releases for the FC1179 controller

Version V1.0.5.2 (June 2022): Use this older version if the latest one fails to detect your drive. How to Use the Tool Identify Your Chip: Use ChipGenius to confirm your controller is exactly

. The tool will also show your "Flash ID," which you'll need later.

Run as Admin: Open FCMpTools.exe. The interface may start in Chinese; look for a Language or English button in the top-right corner to switch.

Settings: Click "Settings" (default password is usually empty or 123456). Set the "Scan Mode" to Standard Scan or Factory Scan if the drive is heavily corrupted. firstchip fc1179 firmware link

Start: Hit the Start button. The process can take anywhere from 10 minutes to over an hour.

Caution: This process permanently erases all data and is often used to reveal the "true" capacity of fake 2TB drives that are actually only 16GB or 32GB.

The FirstChip FC1179 firmware is typically bundled within "MpTools" (Mass Production Tools) used to repair or reflash USB drives. You can download these utility packages from major community archives like FlashBoot.ru or the FirstChip FC1179 section on USBDev.ru. Recommended Download Links

These repositories host various versions based on the specific NAND flash and release date:

USBDev.ru Repository: Offers the latest stable versions, including V1.0.7.2 released in early 2024.

FlashBoot.ru Archive: A secondary source for older and alternative builds if newer versions fail to recognize your chip. Usage Tips If your USB drive is showing errors like

Identify Your Chip: Use a tool like ChipGenius to confirm your controller is exactly the FC1179 before flashing.

Change Language: Most tools open in Chinese by default. Look for a Language dropdown or radio button on the side panel to switch to English.

Default Password: If the "Settings" menu asks for a password, try leaving it blank, or use 123456 or FCMP.

Admin Rights: Always run FCMpTools.exe as an Administrator to ensure it can access the USB hardware properly.

Need help with specific settings for your flash drive, like fixing a "No Media" error or restoring capacity?

Part 4: How to Identify Your FirstChip FC1179 Drive

Before downloading any firmware, confirm that your USB drive truly has an FC1179 controller. Step 3: Configure for Firmware Update In the

The Ultimate Guide to FirstChip FC1179: Where to Find Firmware Links and How to Recover Your USB Drive

First Published: October 2023 | Updated for 2025

If you are reading this, chances are you have a USB flash drive that has suddenly shrunk to 0 bytes, shows as "No Media" in Disk Management**, or Windows keeps asking you to "Insert a disk" even though one is plugged in. You have likely used tools like ChipGenius or USBDeview and discovered a haunting line: Controller Vendor: FirstChip; Controller Part-Number: FC1179.

The solution? Firmware. More specifically, you are searching for a valid FirstChip FC1179 firmware link.

This article is your complete roadmap. We will cover what the FC1179 controller is, why it fails, where to find safe, working firmware links (avoiding the malware traps), and a step-by-step guide to reflashing your drive using the correct MPTool (Mass Production Tool).

Step 3: Configure for Firmware Update

In the settings window, do the following:

  • Tab 1 (Basic): Uncheck "Format" (the tool will do this anyway). Check "Download Firmware".
  • Tab 2 (Flash): Click "Auto Detect Flash". If the tool matches your Flash ID from Step 1, proceed. If not, you have the wrong tool version.
  • Tab 3 (Firmware): Select "Firmware from DB (Database)". Do NOT manually load a .bin unless you are an expert.
  • Tab 4 (Capacity): Set to "Auto" or "Maximum".