The Grundfos PC Tool E-products is a specialized software solution designed for service technicians and end-users to maintain, monitor, and configure Grundfos electronic products (E-products), such as E-motors, E-pumps, and controllers. The tool operates via the GENIbus (Grundfos Electronics Network Intercommunication bus) protocol and is typically used in conjunction with the Grundfos PC Tool Link adapter for physical connectivity. Core Functionalities
The software provides a comprehensive suite of management tools for electronic pump systems:
Monitoring: Real-time tracking of operating status and performance parameters.
Configuration: Capability to perform both standard and custom configurations of E-products, allowing for specific setup requirements that may not be accessible via standard control panels or the R100 remote.
Data Logging: Users can save logged data into text report files, which are essential for long-term performance analysis and fault finding.
Report Generation: The tool includes a built-in function to generate configuration reports directly from the toolbar, which can be saved or printed for documentation. Technical Requirements
To run the PC Tool E-products software effectively, the following minimum system specifications are required: Operating System: Microsoft Windows 2000, XP, or 7. Processor: Pentium 1 GHz or higher. Memory: Minimum 256 MB RAM. Storage: At least 40 MB of free hard disk space.
Hardware Interface: A PC Tool Link adapter (USB or RS-232 versions) is necessary to bridge the connection between the PC and the pump's GENIbus network. Connectivity and Hardware (PC Tool Link) The hardware kit (Product No. 96705378) typically includes:
Converter Box: Translates PC signals to GENIbus, Modbus, or BACnet protocols.
Cables: USB for PC connection, TTL for service ports, and RS-485 for GENIbus/Modbus communication.
Status Indicators: The adapter features nine LEDs that provide visual feedback on communication status between the PC and the Grundfos product. Reporting and Documentation Features
The "PC Tool E-Products 15" context often refers to specific configuration or diagnostic reports.
Trend Curves: Users can click data fields to view parameters as trend curves; however, the standard viewer typically shows only one parameter at a time unless the specific Data Log function is utilized.
Automated Configuration Reports: By selecting the report icon in the toolbar, the software compiles all current settings into a standardized configuration report. User's manual PC Tool E-products | Grundfos
Comprehensive Guide to Grundfos PC Tool E-Products The Grundfos PC Tool E-Products is a specialized service and maintenance software designed for Grundfos E-motors, E-pumps, and controllers. By facilitating direct communication with GENIbus (Grundfos Electronics Network Intercommunication bus) products, it serves as a critical asset for service technicians and end-users to manage advanced pumping systems. Core Functionality and Features
The software provides a robust suite of tools for real-time monitoring and advanced configuration:
Operating Status Monitoring: Users can view the current status of E-products through a block-diagram of control logic and I/O.
Standard and Custom Configuration: The tool allows for the modification of operating performance by sending standard configuration (GSC) files or adjusting specific parameters for custom needs.
Data Logging and Analysis: It automatically logs data from all products on the GENIbus network "as fast as possible," allowing for trend analysis via a plot viewer.
Fault Finding: The alarm log maintains a detailed list of historical alarms and warnings to streamline troubleshooting. Grundfos Pc Tool E Products 15
Reporting: Technicians can generate and preview configuration reports to document system status. System Requirements and Hardware
To operate the PC Tool E-Products, your system must meet these specific technical criteria: Minimum Requirement Processor Pentium 1 GHz or higher RAM Storage 40 MB free hard disk space Operating System Windows 2000, XP, or Windows 7 Interface RS-232 Serial Port or USB
Mandatory Hardware: A Grundfos PC Tool Link adapter is required to connect the PC to the GENIbus network. Both the older RS-232 version (Product Number: 96472084) and the newer USB version (Product Number: 96705378) are compatible. Installation and Setup
Access: The software is typically available through the Grundfos Technical Information (GTI) system or the official Grundfos website .
Execution: Launch the Setup.exe file from the installation package and follow the on-screen wizard.
Updates: If a version is already installed, the installer will automatically update the software to the latest version. Managing E-Products and PC Codes
When working with these tools, you may encounter the term "PC Code." In Grundfos literature, "PC" (Production Code) followed by four digits (e.g., PC 1550) refers to the manufacturing date: the first two digits indicate the year (2015) and the last two indicate the week (week 50).
While the PC Tool E-Products remains a standard for Windows-based service, Grundfos also offers the Grundfos GO Remote app for smartphones and tablets, which provides similar parameterization and logging capabilities via Bluetooth or IR interfaces. Heating Pump Age - Improve your EPC Rating
Grundfos PC Tool E-products is a comprehensive software suite designed for service technicians and end-users to maintain, monitor, and configure Grundfos E-motors, E-pumps, and controllers Core Capabilities The software operates by communicating with
(Grundfos Electronics Network Intercommunication bus) products via a Windows-based PC. Monitoring & Status
: Real-time tracking of operating status, including block diagrams of control logic and motor performance. Configuration Standard Configuration
: Allows users to re-configure units using original configuration numbers or specific application details through GSC (Grundfos Standard Configuration) files Custom Configuration
: Enables the manual adjustment of specific parameters within logically grouped views. Data Logging
: Automatically logs data from all products on the network "as fast as possible." It includes a Trend Curve Viewer for analyzing performance over time. Fault Finding
: Accesses historical data such as alarm logs and operating hours (power-on hours) to facilitate troubleshooting. Essential Hardware: PC Tool Link
To bridge the gap between the PC and the pump's built-in interface, a PC Tool Link communication adapter is required. Connectivity PC Tool Link kit
typically includes cables for USB, TTL (Service port), RS-485 (GENIbus/Modbus), and RS-232. : It ensures galvanic separation
between the PC and the connected product to prevent electrical damage. System Requirements The software is compatible with Microsoft Windows environments and requires the following minimum hardware: : 1 GHz or higher. : At least 256 MB RAM. Disk Space : 40 MB free. OS Support
: Windows 2000, XP, or Windows 7 (Note: Modern versions like 20.16 are available via Informer Technologies Operation Workflow Installation : Installed via the Grundfos Technical Information (GTI) system or specialized setup packages. Network Setup The Grundfos PC Tool E-products is a specialized
: Upon starting, the tool establishes contact with all GENIbus-connected units and displays them in a Network List
: Users can generate configuration reports and export logged data to Microsoft Excel for further analysis and charting. or more on the hardware installation User's manual PC Tool E-products | Grundfos
Grundfos PC Tool E-products is a specialized software suite designed for end-users and service technicians to maintain, monitor, and configure Grundfos E-motors, E-pumps, and controllers. It facilitates communication with GENIbus (Grundfos Electronics Network Intercommunication bus) products via a standard Windows-based PC. Core Functionalities Monitoring
: Real-time tracking of operating status, including motor voltage, current, and speed. Configuration
: Send predefined configuration data based on specific application requirements or product numbers.
: Manually adjust individual parameters, such as restart setups or GENIbus unit addresses. Data Logging
: Automatically logs historical data (e.g., power-on hours, alarm logs) to assist in fault finding.
: Generates configuration reports that can be previewed, saved as files, or printed. Hardware Requirements To establish a connection, a physical Grundfos PC Tool Link adapter is required. Grundfos Product Center Connection Kit
: Typically includes a converter box and cables for USB, TTL (Service port), and RS-485 (GENIbus/Modbus). : Both RS-232 and USB versions are supported. System Requirements Operating System : Windows 2000, XP, or Windows 7.
: Pentium 1 GHz processor, 256 MB RAM, and at least 40 MB of free disk space. Related Software
While PC Tool E-products is standard for technical maintenance, newer alternatives exist for different needs: Grundfos GO Link
: A digital tool for parameterized operation and commissioning via laptop, useful in radio-free environments. Grundfos GO Remote
: A mobile app alternative for smartphones or tablets using Bluetooth or infrared. EICA Selection Tool User's manual PC Tool E-products | Grundfos
The Grundfos PC Tool E-products is a specialized software suite designed for end-users and service technicians to maintain, configure, and monitor Grundfos electronic products (E-products), such as E-pumps, E-motors, and controllers.
While "15" in your query likely refers to versioning or a specific hardware model like the Presscontrol PC 15, the software itself is primarily used with the GENIbus (Grundfos Electronics Network Intercommunication bus) communication protocol. Key Capabilities of the PC Tool E-products
The software allows professional users to manage system health and performance through several core functions:
Real-time Monitoring: Track the operating status of pumps and motors directly from a Windows PC.
System Configuration: Perform both standard and custom configurations for specific application needs.
Data Logging: Save operating data in text report files for performance analysis and troubleshooting. Check current firmware version
Fault Finding: Access service parameters to identify and resolve issues with electronic components. Hardware Requirements
To use the tool, a physical connection is required between the PC and the Grundfos device via a PC Tool Link adapter.
Connection Types: The adapter is available in two versions: an older RS-232 serial interface and a newer USB PC Tool Link.
Compatible OS: Originally designed for Windows 2000, XP, and 7, though newer versions (like 20.16) are compatible with modern Windows environments. Presscontrol PC 15
If your query "15" refers to the Presscontrol PC 15, this is an electrical accessory for automatic pump operation. It is often used to control small water supply pumps.
Specs: Supports a maximum operating pressure of 10 bar and a maximum ambient temperature of 55 °C.
Control: It ensures the pump starts and stops automatically based on water demand.
For modern wireless management, Grundfos has largely transitioned to the Grundfos GO Remote mobile app, which uses a smartphone or tablet for similar parameterization and commissioning tasks.
Are you looking to download a specific version of the software, or are you trying to connect to a specific pump model? User's manual PC Tool E-products | Grundfos
Grundfos PC Tool E-products is a specialised software application used by service technicians and end-users to configure, monitor, and maintain Grundfos E-motors, E-pumps, and controllers. Key Features of PC Tool E-products Comprehensive Monitoring
: View real-time operating status, hardware/software versions, and detailed information about the connected unit's current configuration. Standard and Custom Configuration
: Quickly reconfigure units by selecting Grundfos Standard Configuration (GSC) files based on specific application or product numbers.
: Fine-tune specific parameters and logically grouped settings to meet unique site requirements. Data Logging and Analysis
: Automatically logs performance data "as fast as possible" from all GENIbus-connected products. Logged data can be exported to Excel for detailed charting and trend analysis. Fault Finding and Diagnostics
: Access an integrated alarm log with time-stamped warnings and historical data (e.g., power-on hours) to troubleshoot issues. System Control
: Includes a Command Panel that allows users to manually start, stop, or change the operating mode of a motor or pump directly from their computer. Report Generation
: Generate professional configuration reports that can be printed or saved to a file. Technical Requirements Connectivity : Requires a PC Tool Link USB adapter to connect the PC's USB port to the pump's GENIbus network. Operating System
: Compatible with Microsoft Windows (including versions 2000, XP, and 7). or instructions on connecting it to a specific pump model User's manual PC Tool E-products | Grundfos
