Gt005 Gps Tracker User Manual Info

The GT005 GPS tracker is a versatile GSM/GPRS-based positioning device designed for real-time tracking of vehicles, motorcycles, or electric bikes

. This guide provides a comprehensive overview of its setup, operation, and technical management. 1. Hardware Overview & Specifications

The GT005 utilizes a high-sensitivity GPS chipset (often SiRF Star) for precise location tracking within approximately Network Compatibility: GSM 850/900/1800/1900MHz (Global quad-band). Operating Voltage: Wide range, typically 3.6V - 4.2V DC (internal) or 9V - 90V DC for hardwired versions. Dimensions: Approximately 79mm x 34mm x 18mm. Positioning Methods: GPS + AGPS + LBS + Beidou. 2. Initial Setup & Installation For proper operation, the device must have a valid 2G GSM SIM card with GPRS data and SMS services enabled. A. SIM Card Installation Open the SIM card cover.

Insert the SIM card into the slot correctly (ensure it clicks or locks). Turn the internal battery switch to Replace the cover. B. Vehicle Wiring (Hardwired Version) Connect to the vehicle's battery Positive (+) Black Wire: Connect to the vehicle's battery Negative (-) terminal or ground. Orange Wire: Connect to the ACC (Ignition) line to detect when the engine is on. Yellow Wire: Connect to the relay for the Fuel/Power Cut-off function (optional). Installation Tip:

Install the device with the front side (often marked with a logo) facing the

to ensure optimal satellite reception. Avoid placing it directly under metal surfaces. 3. LED Indicator Meanings GT005 - Banggood

The GT005 GPS Tracker is a popular, cost-effective security solution for motorcycles, electric bikes, and cars. This guide serves as a comprehensive manual to help you install, configure, and troubleshoot your device effectively. 🛠️ Product Overview & Specifications

The GT005 is a mini GPRS/GSM/GPS quad-band vehicle tracker. It is designed for real-time tracking with an emphasis on low power consumption and discreet placement. Network: GSM/GPRS Bands: 850/900/1800/1900MHz Voltage Range: 9V - 36V DC (suitable for most vehicles) GPS Sensitivity: -159dBm Location Accuracy: 5-10 meters Features: ACC detection, vibration alarms, and geo-fencing. 📥 Installation Steps 1. SIM Card Preparation Purchase a standard 2G GSM SIM card. Ensure the SIM has an active data plan and SMS credit.

Important: Disable the PIN code request using a mobile phone before inserting it into the tracker. 2. Device Setup Open the back cover of the GT005.

Slide the SIM card into the slot (ensure the gold chips are facing down). Toggle the internal battery switch to "ON" (if applicable).

The LED indicators will begin to flash as the device searches for signals. 3. Wiring Configuration

The GT005 typically features a simple 2-wire or 3-wire harness:

Red Wire: Connect to the positive terminal of the vehicle battery (+). Gt005 Gps Tracker User Manual

Black Wire: Connect to the negative terminal or vehicle chassis (-).

Orange/Yellow (Optional): Connect to the ACC (ignition) line to track engine status. 📱 SMS Configuration Commands

You can control the GT005 by sending specific SMS codes from your smartphone to the SIM card number inside the tracker. SMS Command Set Admin Number admin123456 [YourPhoneNumber] Check Location smslink123456 Google Maps Link Check Status param123456 Version, ID, IP, etc. Change Password password123456 [NewPassword] password ok Set APN apn123456 [APN Name] Reboot Device CQ system reset ok (Note: "123456" is the default factory password.) 🌐 Online Tracking Setup

To track your vehicle in real-time via an app or website, you must configure the GPRS settings.

Set the APN: Send apn123456 [YourNetworkAPN]. (Check with your SIM provider for the correct APN name).

Set the Server: Most GT005 units use a default platform like Dyegoo or GPS588. Send adminip123456 [ServerIP] [Port].

Login: Download the specified app from the manual's QR code. Use the IMEI number (located on the tracker sticker) as the username and "123456" as the password. 🚦 LED Indicator Meanings Blue LED (GPS): Flashing: Searching for satellites. Solid: GPS fixed. Green LED (GSM): Flashing: Searching for network. Solid: GSM signal acquired. ❓ Troubleshooting Common Issues

Device Offline: Ensure the SIM card has data and the APN is set correctly. Check if the vehicle is in an underground garage where signals are blocked.

Inaccurate Location: If the blue LED is flashing, the device doesn't have a "lock" on satellites. Move the vehicle to an open outdoor area.

No SMS Response: Verify the SIM card is inserted correctly and that the "Admin Number" has been set.

If you need help with a specific part of the setup,I can provide the exact APN settings if you tell me your mobile carrier, or I can help you find the correct mobile app for your specific manufacturer.

GT005 GPS Tracker is a compact, multi-functional security device designed for real-time vehicle monitoring. It features a multi-band capability (850/900/1800/1900 MHz) that allows it to work globally across various cellular networks. Core Functionalities The GT005 GPS tracker is a versatile GSM/GPRS-based

The GT005 is built with several advanced tracking and security features: Precision Positioning:

Uses a combination of GPS, AGPS, LBS, Beidou, and WiFi to provide accurate location data. Anti-Theft Alarms:

Includes alerts for vibration, over-speeding, electronic fence breaches (geofencing), and power cut-offs. Remote Control:

Supports remote engine shutdown by cutting off fuel or electricity through connected relays. Monitoring Features:

Offers environment pickup (voice monitoring) and voice-activated recording capabilities. Installation Guide

For proper operation, the device must be wired correctly into the vehicle's electrical system: GT005 - Banggood

This manual is structured for a typical vehicle/asset GPS tracker (hardwired or magnetic battery version). If your GT005 is a different variant (e.g., keychain or pet tracker), the core concepts still apply, but battery/installation notes will differ.

4. Specifications

Model: GT005
GPS sensitivity: -159 dBm
Positioning accuracy: ~5–10 m (open sky)
GSM band: GSM 850/900/1800/1900 MHz (quad-band)
Battery: Li-ion 3.7V, 1000–1500 mAh (specify actual mAh)
Standby time: up to X days (depends on reporting interval)
Charging time: ~3–4 hours
Working temp: -20°C to +55°C
Dimensions & weight: (specify mm and g)

(Adjust numeric values to match hardware.)

6. Basic Commands (SMS)

Send SMS commands from your authorized phone number to the GT005’s SIM number.

| Function | SMS Command | Reply Example | |----------|-------------|----------------| | Get location | G123456 (default password 123456) | Lat:22.5432, Lng:114.0567, Speed:0km/h, Date:... | | Set authorized number | admin123456 13912345678 | Admin number set. | | Change password | password123456 654321 | Password changed. | | Geo-fence (circle) | circle123456 22.5,114.0,500 | Geo-fence set radius 500m | | Movement alert (over speed) | speed123456 80 | Alert when over 80km/h | | Heartbeat interval | interval123456 60 | Upload every 60 seconds | | Reset device | reset123456 | Rebooting... |

Replace 123456 with your actual password.

5. Charging / Power On

Battery model: Charge via Micro USB for 4-6 hours before first use. Press power button for 3 seconds to turn on.
Hardwired model: Connect RED wire to vehicle battery positive (+12V/24V) and BLACK wire to negative (GND). Optional ACC wire to ignition.

7. Mobile App / Web Platform

Most GT005 units work with a standard tracking platform (e.g., GpsGate, GT06 protocol server, or the reseller’s branded app). Model: GT005 GPS sensitivity: -159 dBm Positioning accuracy:

Download the recommended app (ask your seller for the URL/APK – often named “ProTrack” or “GPS Live”).
Register using the tracker’s IMEI number (printed on the label).
Login → Add device → Enter IMEI.
View real-time location, history, and configure alerts.

Alternatively, use a third-party GT06-compatible app like “GPS Server” or “Mobile GPS Tracker.”

Essential SMS Commands (Cheat Sheet)

⚠️ Warning: The “Cut Fuel” command (relaycut) can cause accidents if used while driving. The manual explicitly warns to use it only when vehicle speed is 0 km/h.

Essential SMS Commands

Note: These commands are standard for the GT005, but some manufacturers may use slight variations. Replace [Password] with the default password, usually 123456 unless you have changed it.

To Get Current Location:

SMS: 888 Response: The tracker will reply with a Google Maps link. Click the link to see the precise location.

To Set an Admin Number (Authorization): This allows a specific phone number to control the tracker.

SMS: admin[ip][password] [phone number] Example: adminip123456 15551234567

To Check Battery Status:

SMS: battery% Response: Tracker replies with current battery percentage.

To Set Up a Geo-Fence: This restricts the device to a specific radius.

SMS: move [password] [radius in meters] Example: move 123456 500 (Sets a 500-meter radius).

Step 3: Power On

Slide the power switch to ON.
LED pattern after ~60 seconds:
- Blue flash every 1 sec → GSM registered (good).
- Blue flash every 3 sec → GPS locked (good).
- Red flash → No GSM signal / SIM issue.