HP H-IG41-uATX (Eton) revision 1.1 is an OEM motherboard manufactured by Foxconn, commonly found in HP and Compaq desktop PCs like the HP Compaq 500B Key Specifications Form Factor : Micro-ATX (uATX). : LGA 775 (Socket T). : Intel G41 (Northbridge) / ICH7 (Southbridge). : 2x DDR3 DIMM slots. Officially supports up to (2x2GB), though the chipset can technically handle up to with specific high-density modules. Expansion Slots 1x PCIe x16 (for graphics cards). 2x PCIe x1. 1x Mini-PCI. : 4x SATA II (3.0 Gb/s) connectors.
: VGA port, 4x USB 2.0, RJ-45 (LAN), and Audio jacks (Realtek ALC662). The Retro Web Manual & Support Resources
Finding a single, comprehensive "manual" in PDF format can be difficult because it is an OEM part. However, you can find technical documentation and community guides at the following locations: Technical Details The Retro Web provides detailed chip info and BIOS files. User Manual Downloads : Scanned versions are often hosted on platforms like Manuals.plus Troubleshooting : Community discussions on Tom's Hardware
cover common issues like RAM compatibility and front panel headers. Quick Tips for Installation CPU Support
: Supports Intel Core 2 Quad, Core 2 Duo, Pentium, and Celeron processors. Front Panel Headers
The manual lists driver support for:
The complete story ends with the manual being archived by enthusiasts: h-ig41-uatx rev 1.1 manual
If you actually need step-by-step setup instructions, BIOS settings explanation, or front panel connector diagram, let me know — I’ll provide them as a clear technical “manual” rather than a story.
While there isn't a single official PDF "manual" for the H-IG41-uATX Rev 1.1 (also known as the Foxconn Eton or 582679-001), here is the essential information you would typically find in one. This motherboard was used in various HP and Compaq 500B Microtower PCs. Core Specifications Form Factor: Micro-ATX (24.5 cm x 24.5 cm). Socket: LGA 775. Chipset: Intel G41 Express. Memory: Slots: Two 240-pin DDR3 DIMM sockets. Capacity: Officially supports up to 4 GB (2x 2GB modules).
Type: PC3-10600 (DDR3-1333), PC3-8500 (DDR3-1066), or PC3-6400 (DDR3-800); Non-ECC and unbuffered only.
Supported Processors: Intel Core 2 Quad (up to 95W), Core 2 Duo, Pentium Dual Core, and Celeron Dual Core. Internal Connections & Expansion Expansion Slots: 1x PCI Express x16 (for graphics cards). 2x PCI Express x1. 1x PCI slot. 1x Mini-PCI slot (often for wireless cards). Storage: 4x SATA II ports.
Power: 1x 24-pin ATX main power and 1x 4-pin ATX 12V CPU power connector. Headers: 2x USB 2.0 headers (supporting 4 total ports). 1x 9-pin Front Panel header (Power/Reset/LEDs). 1x 9-pin Front Audio header (yellow). Rear I/O Ports 1x VGA port. 4x USB 2.0 ports. 1x RJ-45 LAN port (Fast Ethernet).
3x Audio jacks: Line-in (blue), Line-out (green), and Microphone (pink). Helpful Resources HP H-IG41-uATX (Eton) revision 1
Specifications: You can view a detailed breakdown of the Foxconn Eton Motherboard Specs on Scribd.
Drivers & BIOS: The Retro Web hosts older BIOS files and chipset drivers.
Pinout Help: Since front panel headers aren't always labeled, generic motherboard connection guides on YouTube can help you identify the 9-pin power/reset layout. H-I41-uATX Motherboard Specifications | PDF | Usb - Scribd
This report synthesizes information typically found in the manual and technical specifications to assist with identification, setup, and troubleshooting.
Before diving into the manual specifics, it is important to understand what this board is. The H-IG41-uATX Rev 1.1 is a micro-ATX (uATX) motherboard manufactured primarily by Pegatron or Foxconn for HP.
Why the manual matters: Without the official manual, users often struggle with front panel header pinouts (power switch, HDD LED), clearing CMOS settings, or enabling virtualization (VT-x). Windows XP (32-bit only) – Full driver support
The H-IG41-uATX Rev 1.1 uses an American Megatrends (AMI) BIOS with HP’s custom interface. To enter BIOS, press F10 repeatedly during boot.
Manual solution (Section 3.4 - Video Configuration):
Advanced > Video Configuration.Primary Video Adapter from Auto to PCI Express.The H-IG41-UATX Rev 1.1 uses an American Megatrends (AMI) BIOS with a blue or gray interface. Press DEL during boot to enter. Key sections:
This section is vital for rebuilding the PC or troubleshooting front panel connections.
Front Panel Header (JFP1): Usually located at the bottom right of the board. The standard pinout for Foxconn/OEM boards is typically:
Storage Connectors:
Power Connectors: