Skip to content

How Do I Reset My Provision Dvr Password Portable File

How Do I Reset My Provision DVR Password?

Forgetting your security DVR password can be frustrating, especially when you need to check footage or adjust recording settings. Provision DVRs (Digital Video Recorders) have a built-in password reset process that does not require you to lose your recorded data. Follow this guide to regain access.

Method 1: Reset Using the Master Password (Fastest)

Works on most Provision DVR models from 2018 onward. how do i reset my provision dvr password

  1. On the DVR login screen, enter any wrong password 3 times.
  2. A "Forgot Password?" or "Unlock" button will appear. Click it.
  3. The screen will display a "System Unlock Code" (a 6–8 digit number).
  4. Take that code to the official Provision password reset tool (online or via their support line).
  5. Enter the unlock code → you will receive a temporary master password.
  6. Type that master password into the DVR to log in immediately.
  7. Go to Main Menu → System → User and set a new permanent password.

Tip: Provision’s free password reset tool is usually at provision-reset.com or via their dealer portal. If the link is dead, call Provision support with your DVR model and unlock code. On the DVR login screen, enter any wrong password 3 times

Step-by-Step Instructions:

  1. Power on your DVR and connect it to a monitor via VGA/HDMI.
  2. At the login screen, click "Forgot Password" or the lock icon in the bottom right corner. (If you don't see this option, skip to Method 3).
  3. The screen will display a window with two fields:
    • Serial Number (S/N)
    • Security Code (A random string of letters/numbers)
  4. Write down the Serial Number exactly as it appears. This is crucial.
  5. On a separate computer or phone, open a web browser and go to the official Provision-ISR password reset tool. (Search for "Provision ISR password reset tool" or look for the "Support" section on their official website—the URL changes, but the tool is usually called Provision DVR Password Generator).
  6. Enter the Serial Number into the required field.
  7. Click Generate. The tool will produce a temporary Reset Password code.
  8. Type that temporary code into your DVR's "Security Code" or "New Password" field.
  9. Press "OK." The DVR will immediately log you in and prompt you to set a permanent new password.

Warning: This temporary code usually expires in 5-10 minutes. Do not let the screen time out. Tip: Provision’s free password reset tool is usually

Quick steps (common method)

  1. Power off the DVR and disconnect any network cables.
  2. Open the DVR case or locate the reset jumper/button (model-dependent).
  3. Short the reset pins or press/hold the reset button for 10–30 seconds while powering the unit back on.
  4. Reboot and use the default admin credentials (commonly admin / 123456 or admin / 000000).
  5. Reconnect network, log in, and immediately change the password.

Method 3: Hard Factory Reset (Last Resort - Erases Footage)

If you cannot generate a security code (e.g., the DVR has no network access and you lost the serial number sticker), you must perform a physical factory reset.

Warning: This will erase all settings (network IP, motion detection) and may erase recorded video depending on the model.

Preventing This in the Future

✅ Write down your password and store it in a secure place (password manager).
✅ Set a security question in System → User → Password Recovery (if your model supports it).
✅ Export your settings via USB – Main Menu → System → Config Backup. If you forget the password, you can restore the backup after a reset.
✅ Update firmware – newer Provision DVRs have email/SMS password recovery options.