How To Fix A Insinkerator Garbage Disposal Hot «2025»

Here’s a step-by-step guide to fixing an InSinkErator garbage disposal that feels hot to the touch or is shutting off due to overheating.

Does running hot water help?

No. Only use cold water when running the disposal. Cold water solidifies any grease or oil so the blades can chop it into particles. Hot water melts grease, which then coats the blades and internal walls, leading to jams and overheating. how to fix a insinkerator garbage disposal hot

What If the Reset Button Won’t Stay In?

This is a classic sign of a ground fault or a burnt-out motor. Here’s a step-by-step guide to fixing an InSinkErator

• Try this first: Unplug the disposal or disconnect power for 1 hour. Sometimes the thermal switch needs an extended cooldown.
• Still won’t stay in after an hour? The motor windings may have shorted. This usually means replacement time. An InSinkerator typically lasts 8–12 years.

---

How to Prevent Your InSinkerator From Overheating Again

An ounce of prevention is worth a pound of repair calls. Try this first: Unplug the disposal or disconnect

| Don’t put these down | Do this instead | | :--- | :--- | | Pasta, rice, bread (expands and jams) | Compost or trash | | Celery, corn husks (fibrous strings wrap the motor shaft) | Trash | | Coffee grounds (turns to sludge paste) | Compost or trash | | Grease or oil (cools to solid, seizes bearings) | Pour into a can, then trash | | Eggshells (membrane wraps the impellers – a myth that they sharpen blades) | Compost (they dull blades!) |