Scroll Top

How To Hard Reset Mibro Kids P5 Link !new! -

How to Hard Reset a MiBro Kids P5 Link: The Complete Troubleshooting Guide

The MiBro Kids P5 Link is a robust 4G smartwatch designed to keep parents connected with their children through GPS tracking, voice calls, and video messaging. However, like any piece of technology, it can occasionally freeze, lag, or become unresponsive. You might also need to wipe the device completely before selling it, handing it down to another sibling, or fixing persistent software glitches.

Important Note: A hard reset (also known as a factory reset or master reset) will erase ALL data from the watch. This includes contacts, chat history, voice messages, photos, and personalized settings. The SIM card data remains untouched, but watch settings revert to how they were when you first unboxed it. After the reset, you will need to re-pair the watch with the SeTracker2 or MiBro app on your parent’s phone.

Before You Begin: Key Considerations

Troubleshooting: When the Reset Fails

If you have tried the Hard Reset and the watch is still stuck on the logo or won't turn on:

  1. Charging Check: Connect the watch to the charger and let it sit for 30 minutes. Sometimes a "frozen" screen is actually just a critically low battery that won't respond to button inputs until it has a base charge.
  2. Screen Protector: If the touch screen is unresponsive but the buttons work, check if a screen protector is too tight or damaged, pressing into the digitizer.
  3. Contact Support: If the watch vibrates but the screen remains black, or if it is stuck on the logo indefinitely after a reset, the issue is likely hardware-related (a loose display ribbon or corrupted firmware chip), and you will need to contact Mibro Support for a warranty replacement.

Hard resetting the Mibro Kids P5 restores factory settings by erasing all data, either through a dialer code ( ), an SMS command ( pw,123456,factory#

), or via the Mibro Kids app. It is recommended to ensure at least 20-30% battery to prevent system errors. For a full guide and troubleshooting steps, visit HardReset.info How To Factory Reset Mibro Watch GS Pro ( Settings Method ) how to hard reset mibro kids p5 link

Act 3: The S.O.S. Method (Alternative)

If the standard button hold did not work, some firmware versions of the Mibro Kids P5 respond to an "S.O.S." style reset. This is often used if the watch is frozen on a specific screen.

The Steps:

  1. Turn the watch over so the screen is facing down.
  2. Look for the small Reset Pinhole (if your specific model variation includes one) OR simply use the side button.
  3. Press the side button 5 times rapidly (within 3 seconds).
  4. This triggers an "S.O.S." call attempt; usually, interrupting this process by holding the button down during the countdown can force a reset on some software versions.

After the Hard Reset: Step-by-Step Re-Pairing

Once the reset is done, the watch will greet you with a startup wizard. To make it functional again, follow this checklist:

  1. Choose Language: Select English or your local language.
  2. Activate QR Code: Swipe to find the pairing QR code. It looks like a square barcode.
  3. Open Parent App: On your phone, open SeTracker2 or MiBro app.
  4. Add Device: Tap “Add Device” or the “+” icon. Scan the QR code on the watch.
  5. Bind the Watch: Enter your child’s nickname, age, and your relationship.
  6. Enter Admin Info: You will need to set a SOS number (your phone number) and a Contact list. Without this, the watch cannot make calls.
  7. Insert APN Settings (Important!): In the app, go to Device Settings > APN (Access Point Name). Enter your mobile carrier’s APN (e.g., “internet,” “wap.cingular”). Without correct APN, 4G data and GPS will fail. Most modern SIMs auto-configure, but cheap MVNOs may require manual entry.
  8. Test: Call the watch from your phone. Press the SOS button on the watch to ensure it calls you back.

Method 3: Remote Hard Reset via the Parent App

If you cannot physically access the watch (e.g., the child lost it or the screen is broken), the MiBro app allows a remote reset as long as the watch has cellular data or Wi-Fi. How to Hard Reset a MiBro Kids P5

Step 1: Open the Parent App Launch the SeTracker2 or MiBro Care app on your smartphone. Log in with your parent account.

Step 2: Select Your Child’s Device On the dashboard, tap the icon for the P5 Link watch. Look for the Settings (three lines or gear icon) in the top right corner.

Step 3: Find the “Reset” or “Clear Data” Option Scroll down until you find an option labeled:

Step 4: Send the Command Tap the reset option. The app will ask you to confirm. Some versions require you to enter the admin password of the app (not the watch). Confirm again.
The watch will receive a silent SMS command (consumes a small amount of SIM credit) and will automatically begin the reset process within 30 seconds. Before You Begin: Key Considerations

Step 5: Re-pairing Required After the remote reset, the watch will be disconnected from your app account. You must re-add the device using the new QR code that appears on the watch screen.

After the Hard Reset

Method 2: Reset via Settings (If Watch Is Accessible)

If you can still navigate the watch menus:

  1. From the watch face, swipe down for Quick Settings or swipe left to find the Settings app (gear icon).
  2. Scroll to System or More Settings > Reset.
  3. Tap “Factory data reset” or “Erase all data”.
  4. Confirm your choice when prompted. The watch will restart automatically.

After the Reset

Once the watch reboots, you will need to pair it with the MiBro App again, just like you did on day one. Scan the QR code on the watch screen with your phone, set up the time zone, and re-add your parent profile.

Pro Tip: Write down the new 4-digit passcode and stick it in a kitchen drawer. You’ll thank me later.

Have you tried these steps? If your MiBro P5 Link is still acting up, contact MiBro customer support—your watch may have a hardware issue covered by warranty.