To make your payment please select the location below where your procedure was performed. After clicking you will be redirected to the ePay website to securely complete your payment.
Capitola Cass Munras Ryan Ranch Salinas
To make your payment please select the location below where your procedure was performed. After clicking you will be redirected to the ePay website to securely complete your payment.
Capitola Cass Munras Ryan Ranch Salinas
Introduction: A Legendary Printer Meets Modern Windows
The HP LaserJet M1005 Multifunction Printer (MFP) is widely regarded as one of the most durable and reliable monochrome laser printers ever produced. For over a decade, it has been a staple in small offices, home businesses, and even personal workspaces due to its low cost per page, exceptional build quality, and simple scan-to-PC functionality.
However, as Microsoft continues to update Windows 10 (and now Windows 11), many users encounter a frustrating problem: their trusted M1005 is not recognized, prints gibberish, or refuses to scan. The root cause is almost always an incorrect, outdated, or corrupted HP LaserJet M1005 MFP driver for Windows 10 64-bit.
This article provides a definitive, step-by-step guide to finding, installing, and troubleshooting the correct 64-bit driver for your HP LaserJet M1005 on Windows 10.
For an end user:
Use Method A if scanning is not required – it is the simplest and most stable.
For a professional/user needing scanning:
Use Method C (legacy driver in Windows 7 mode) + NAPS2 for scanning. Be prepared to block Windows driver updates.
For an IT department:
Deploy the HP Universal Print Driver and deploy standalone scanning solutions (e.g., Vuescan or Twain workstation software). Replace the M1005 with a modern MFP if full Windows 10 native support is critical.
If you just need a printer, the M1005 is still excellent. If you need plug-and-play scanning on Windows 10/11, consider a newer HP LaserJet MFP (e.g., M140we, M234sdw) — but for budget/repair, the M1005 with manual driver install is a reliable workhorse.
To set up your HP LaserJet M1005 MFP Windows 10 64-bit system, you need the "Full Feature Software and Driver" package. This ensures both printing and scanning functionalities are properly enabled. 1. Official Download Sources
The most reliable way to get the correct driver is directly from HP. HP Support Site : Visit the HP LaserJet M1005 MFP Software and Driver page to detect your OS and download the latest "Full Solution". HP Easy Start : You can also use HP Easy Start
, which automatically identifies the printer and downloads the appropriate software for your current Windows version. 2. Installation Steps Follow this sequence to avoid common connection errors: Preparation hp laserjet m1005 mfp drivers windows 10 64 bit
: Disconnect the USB cable from your computer before starting the installation. Run Installer : Open the downloaded file. If a User Account Control prompt appears, select Follow Prompts
: Agree to the license terms and continue through the setup screens. Connect USB
: Only plug the printer’s USB cable into your PC when the installer explicitly asks you to do so.
: Once the connection is recognized, the installer will complete the setup. You can verify the installation in Control Panel > Devices and Printers 3. Troubleshooting & Scanning
If the basic installation fails or if the scanner isn't recognized:
To install drivers for your HP LaserJet M1005 MFP on Windows 10 (64-bit), you can use the official HP software or compatible legacy drivers if the latest version is unavailable. 1. Download and Installation Steps The most reliable method is through the HP Support Portal Official HP Easy Start HP Easy Start Printer Setup Software
to automatically detect and install the correct 64-bit drivers. Manual Driver Download : If Easy Start is not preferred, download the Full Solution driver specifically for the to ensure both printing and scanning features work Compatibility Note
: Drivers from 2013 (Version 1.0.2.1941) are confirmed to support Windows 10 64-bit. 2. Setup Procedure Prepare the Printer
: Connect the power cable and ensure the printer is turned on. USB Connection
connect the USB cable to your PC until prompted by the installation software. Run Installer : Open the downloaded The Complete Guide to HP LaserJet M1005 MFP
file. Follow the on-screen prompts and agree to the license terms. Connect when Prompted
: Plug in the USB cable when the software asks for it to complete the configuration. Verification Control Panel > Devices and Printers to confirm " HP LaserJet M1005 " is listed 3. Troubleshooting Common Issues
Installing drivers for the HP LaserJet M1005 MFP Go to product viewer dialog for this item.
on Windows 10 (64-bit) can be tricky because it is an older model, but you can typically get it running using the official "Full Feature Software and Driver" package. Step-by-Step Installation Guide Download the Driver: Visit the official HP LaserJet M1005 Support Page.
Ensure your operating system is detected as Windows 10 (64-bit). If not, select it manually.
Download the HP LaserJet M1005 Full Solution (often around 120MB) to ensure both printing and scanning features are included. Preparation:
Unplug the USB cable from your computer before starting the installer. Uninstall old drivers
if you previously tried and failed. Go to Settings > Devices > Printers & Scanners, select the Go to product viewer dialog for this item. , and click "Remove device". Run the Installer: Open the downloaded .exe file.
Follow the on-screen prompts. Only connect the USB cable when the software specifically asks you to do so. This helps Windows 10 correctly associate the driver with the hardware. Verification:
Once finished, go to Control Panel > Hardware and Sound > Devices and Printers. Right-click the HP LaserJet M1005 icon and select Set as default printer. Fixing "Driver Unavailable" or Scanner Issues 🏁 Final Rating: 7/10 (for Windows 10 64-bit)
If the basic installer fails or your computer says "Driver is unavailable," try this manual method: HP LaserJet M1005 Multifunction Printer series - HP Support
HP LaserJet M1005 Multifunction Printer series Software and Driver Downloads. | HP® Support. Software and Drivers.
Getting the HP LaserJet M1005 MFP working on Windows 10 64-bit can be tricky because it's an older device, but it is fully compatible. This guide covers how to find, install, and troubleshoot the correct drivers to ensure your printer, scanner, and copier functions remain fully operational. 1. Download the Correct Driver
For a Windows 10 64-bit system, you need a driver specifically built for the 64-bit architecture.
Official HP Support: Visit the HP LaserJet M1005 MFP Support Page to download the full software solution or basic driver.
HP Easy Start: If available, the HP Easy Start Printer Setup Software (version 17.4.18) can automate the installation over an internet connection.
Driver Details: The driver version 1.0.2.1941 is widely used for Windows 10 64-bit. 2. Installation Steps To ensure a clean installation, follow these steps:
After driver install, go to Windows Settings → Devices → Printers & scanners → Click M1005 → Manage → Printer properties → Advanced tab → New Driver → Have Disk → Browse to:
C:\Program Files\HP\HP LaserJet M1005 MFP\Driver\
Select the .inf file.
This forces the correct scanner driver (WIA/Twain).
A driver acts as a translator between your computer's operating system and the printer hardware. Using an incorrect or outdated driver on a 64-bit system can lead to common issues such as:
Right-click installer → Properties → Compatibility → Run this program for Windows 8 or 7.
wushowhide.diagcabPrepared by: Technical Analysis Unit
Disclaimer: HP has discontinued official Windows 10 64-bit support for this model. This report is based on community testing and documented workarounds.
Here’s a sample blog post or forum-style response you can use or adapt. It’s written to be helpful for someone searching for that exact driver.
