Huawei Atn 910d-a Datasheet _top_

The Huawei ATN 910D-A is a compact, high-capacity 1U router designed specifically for 5G base station access and VIP private line services. It features an 800 Gbps switching capacity and supports advanced networking protocols like SRv6, FlexE, and EVPN. Technical Specifications

Detailed hardware and performance metrics for the ATN 910D-A include: Capacity: 800 Gbps system switching capacity.

Physical Dimensions: 442 mm x 220 mm x 44.45 mm (1U height).

Weight: Approximately 4.2 kg to 4.3 kg depending on the configuration. Interface Density: 4 x 100GE/50GE ports. 16 x 25GE/10GE/GE ports. 8 x 10GE/GE/FE ports.

Power Consumption: Typical consumption is approximately 180W.

Power Supply: Supports 1+1 redundancy with dual AC, dual DC, or AC+DC modes.

Cooling: Integrated 3-fan system with 2+1 redundancy, using left-to-right airflow. Core Features & Protocols

5G-Ready Protocols: Supports Segment Routing over IPv6 (SRv6), FlexE slicing for network isolation, and iFIT for real-time performance monitoring.

Layer 2 & 3 Support: Includes OSPF, BGP, IS-IS, RIP, VXLAN, MPLS LDP, and RSVP-TE.

Precision Timing: High-precision clock synchronization supporting 1588v2, Synchronous Ethernet, and G.8275.1/G.8275.2 standards.

Industrial Design: Designed to operate in harsh environments with a wide temperature range from -40°C to +65°C (-40°F to +149°F). Official Documentation & Resources

For detailed configuration and installation steps, refer to these official Huawei resources:

Support Portal: Access the ATN 910D-A Product Support Guide for manuals, troubleshooting, and license queries.

Installation Manual: View the Quick Installation Guide for cabinet mounting and cable routing instructions.

Product Brochure: A detailed ATN 910D-A Brochure is available on Scribd providing a visual overview of application scenarios. Huawei ATN 910D-A Support Guide, Manuals & PDF

The Huawei ATN 910D-A is a compact 1U, 5G-oriented router designed for high-density access, supporting 800 Gbps to 880 Gbps switching capacity and advanced features like SRv6, FlexE, and high-precision synchronization. Engineered for mobile backhaul and VIP private lines, this robust device supports flexible outdoor deployment with a wide operating temperature range and is optimized for space-constrained edge locations. For more details, visit Huawei Carrier

The Huawei ATN 910D-A is a high-performance, fixed multi-service access router designed to support the transition to 5G and various private line services

. Below is an overview of its datasheet specifications and operational capabilities. Core Capabilities and Performance

The ATN 910D-A is built for large-scale deployment of access devices, particularly in 5G and FMC (Fixed-Mobile Convergence) scenarios. System Capacity : It offers a high system capacity of up to

, allowing it to handle massive data traffic at the network edge. Form Factor : The device features a compact

design (442mm x 220mm x 44.45mm), making it suitable for high-density installations in standard 19-inch cabinets. Power Efficiency : Typical power consumption is approximately , and it supports 1+1 power redundancy for both AC and DC inputs to ensure high reliability. Port Density and Connectivity Huawei Atn 910d-a Datasheet

Designed for versatile access, the router provides high-density interfaces ranging from GE to 100GE: High-Speed Uplinks : Includes 4 x 100GE/50GE ports for high-capacity backhaul. Flexible Access : Features 16 x 25GE/10GE/GE 8 x 10GE/GE/FE

ports, accommodating legacy and modern connectivity requirements. Advanced Network Features

The ATN 910D-A supports a comprehensive suite of modern networking protocols and features: Segment Routing : Fully compatible with SR and SRv6

, enabling programmable and simplified network architectures. Virtualization : Supports EVPN (Ethernet VPN) for secure, multi-tenant service delivery. Precision Timing : Incorporates 1588v2 high-precision clock synchronization

, critical for the strict timing requirements of 5G mobile base stations. Network Slicing : Supports FlexE (Flexible Ethernet) iFIT (In-situ Flow Information Telemetry)

for precise network slicing and real-time performance monitoring. Environmental and Deployment Resilience

The router is engineered to operate in diverse and harsh environments: Temperature Range : It operates reliably in temperatures from -40°C to +65°C Shared Installation

: Its compact size allows it to be installed in the same cabinet as wireless Baseband Units (BBUs), facilitating "zero site" footprint strategies. For further technical documentation, you can access the Huawei ATN 910D-A Support Guide ATN 910D-A Brochure for detailed hardware and configuration manuals. with other models in the NetEngine 8000 series or explore specific SRv6 configuration Huawei ATN 910D-A Support Guide, Manuals & PDF

Powering the 5G Era: An Inside Look at the Huawei ATN 910D-A

As the world transitions fully into the 5G era, service providers are facing a monumental task: how to handle the explosion of data traffic without ballooning their physical footprint or energy costs. Enter the Huawei ATN 910D-A, a heavy hitter in the world of compact, high-capacity routing.

Part of Huawei’s NetEngine family, the ATN 910D-A is designed specifically for 5G X-Haul and VIP private line services. Here is why this 1U powerhouse is making waves in the industry. Massive Capacity in a Tiny Frame

The most striking feature of the ATN 910D-A is its density. Despite being just 1U high and having a shallow 220mm depth, it boasts an impressive 800Gbps switching capacity. This compact design allows it to share cabinets with wireless base stations, making it an ideal choice for large-scale, space-constrained deployments. Versatile Connectivity

To meet the "last-mile" requirements of modern networks, the 910D-A offers a high-density array of ports:

High Speed: Supports 4 x 100GE/50GE interfaces for core uplink.

Flexible Access: Includes 16 x 25GE/10GE/GE and 8 x 10GE/GE/FE ports.

Service Ready: It is built to handle 2G, 3G, 4G, and 5G traffic simultaneously, ensuring a smooth evolution for carriers. Intelligent 5G Features

It isn't just about raw speed; it’s about intelligence. The ATN 910D-A is packed with 5G-ready features that simplify network management:

Next-Gen Routing: Full support for SR/SRv6 (Segment Routing) and EVPN, allowing for more programmable and automated network paths.

Network Slicing: Utilizes FlexE (Flexible Ethernet) to provide hard isolation of services, ensuring critical data gets the bandwidth it needs without interference.

Precision Timing: Supports 1588v2 high-precision clock synchronization, a non-negotiable requirement for 5G base station coordination. Built for the Real World The Huawei ATN 910D-A is a compact, high-capacity

Telecommunications equipment rarely sits in a climate-controlled room. The ATN 910D-A features an industry-level design capable of operating in extreme temperatures ranging from -40°C to +65°C. For added reliability, it includes dual DC/AC power supplies with 1+1 backup, ensuring that your network stays up even if a power source fails. The Bottom Line

The Huawei ATN 910D-A is a strategic asset for any provider looking to densify their 5G access layer. By combining massive throughput with a tiny physical footprint and intelligent automation features, it solves the "more data, less space" dilemma of modern networking.

Looking to dive deeper into the technical specs? You can find the official Huawei ATN 910D-A Support Guide for detailed manuals and documentation. ATN Series - Huawei Carrier

2. Hardware Specifications (Detailed Datasheet)

This section extracts the core technical data equivalent to an official Huawei datasheet.

Conclusion

The Huawei ATN 910D-A is more than just a datasheet entry – it is a workhorse for modern IP RAN and enterprise aggregation. It successfully marries the service agility of MPLS/Segment Routing with the deterministic performance required for 5G and industrial networks.

When sourcing the datasheet for a current project, remember that hardware revision V2 (as of late 2024) includes support for G.8275.2 (PTE) profile and 100Mbps SFP compatibility. Always confirm with your local Huawei partner that the unit ships with the latest firmware bundle.

Final recommendation: For brownfield 4G upgrades or greenfield 5G builds requiring high-density GE plus 10GE uplinks in a thermally challenging environment, the ATN 910D-A remains a top-tier choice.

Disclaimer: Specifications are based on publicly available datasheets and Huawei documentation as of May 2025. Features may vary by software version and regional regulations. Contact Huawei or a certified reseller for the latest datasheet PDF.

Huawei ATN 910D-A is a compact, high-capacity, 1U fixed-port router designed for the access and aggregation layers of 5G mobile transport and VIP private line services. As part of Huawei’s ATN Series

, it provides a bridge for carriers transitioning from traditional MPLS to advanced 5G-oriented features like SRv6 and network slicing. Key Technical Specifications

The ATN 910D-A is built for high-density requirements in space-constrained environments like wireless base station cabinets. Specification System Capacity Dimensions (WxDxH) 442mm x 220mm x 44.45mm (1U) ~4.2 kg to 4.3 kg (depending on AC/DC power) Typical Power Consumption Operating Temperature –40°C to +65°C Left-to-right (3 integrated fans, 2+1 backup) Interface Density & Connectivity

The router supports a versatile mix of high-speed ports to handle massive data growth from 5G base stations. Huawei Carrier 100GE/50GE Ports: 4 ports for high-capacity uplink or backbone connectivity. 25GE/10GE/GE Ports: 16 ports providing flexible multi-rate options. 10GE/GE/FE Ports: 8 additional ports for legacy or lower-bandwidth services. Core Technologies and Features 5G-Ready Architecture: Supports advanced protocols including Segment Routing (SR)

, enabling simplified tunnel technology and more efficient L2/L3 service delivery. Network Slicing (FlexE): Flexible Ethernet (FlexE)

to divide physical ports into multiple isolated slices. This allows carriers to allocate dedicated bandwidth for specific services (e.g., mission-critical VIP lines vs. standard data) without interference. High-Precision Synchronization: Fully supports

, ensuring the strict timing required for 5G mobile networks. Industrial-Grade Reliability:

Designed for harsh environments with a wide temperature range and dual power modules (supporting AC+DC, dual AC, or dual DC). Intelligent O&M: In-situ Flow Information Telemetry (iFIT)

for millisecond-level fault detection and real-time service quality visualization. Application Scenarios The ATN 910D-A is primarily deployed for: Mobile Backhaul:

Transporting 2G/3G/4G/5G traffic from base stations to the core network. VIP Private Lines:

Providing high-reliability, low-latency connectivity for enterprise customers with strict Service Level Agreements (SLAs) Huawei Carrier with its sibling, the ATN 910D-C , which offers even higher switching capacity? ATN 910D-A Brochure v2.0 | PDF - Scribd

The Huawei ATN 910D-A is a compact, 5G-ready multi-service access router designed primarily for mobile backhaul (2G/3G/4G/5G) and VIP private line services. Built as a 1U fixed-case device, it balances high switching capacity with an industry-grade design suitable for diverse deployment environments. Key Specifications & Performance or extract exact port counts

Switching Capacity: Features an 800Gbps to 880Gbps system capacity, which is exceptionally high for its 1U form factor.

Interface Density: Equipped with a high density of high-speed ports: 4 x 100GE/50GE 16 x 25GE/10GE/GE 8 x 10GE/GE/FE

Physical Dimensions: Measures 442mm x 220mm x 44.45mm (1U height), allowing it to fit into standard 300mm deep cabinets alongside other wireless equipment. Weight: Approximately 4kg. Advanced 5G & Networking Features ATN 910D-A

is built on a programmable NP architecture, supporting smooth evolution from traditional MPLS to next-gen protocols.

Routing Protocols: Supports SR/SRv6 (Segment Routing), EVPN, and FlexE (Flexible Ethernet) for network slicing and service isolation.

Clock Synchronization: High-precision synchronization via 1588v2, Synchronous Ethernet, and G.8275.1/2 standards.

Intelligent O&M: Utilizes iFIT (In-situ Flow Information Telemetry) for real-time, millisecond-level service quality monitoring and automated fault demarcation through the Huawei iMaster NCE platform. Reliability & Environmental Design

Power Redundancy: Supports dual DC or AC power inputs in a 1+1 backup configuration for carrier-grade reliability.

Temperature Range: Designed for harsh environments, operating between -40°C to +65°C, which supports outdoor cabinet deployment.

Heat Dissipation: Includes an integrated fan system (typically 3 fans in a 2+1 backup setup) with left-to-right airflow.

For full technical documentation, configuration guides, and software downloads, visit the official Huawei ATN 910D-A Support Page. ATN Series - Huawei Carrier

3. Performance Metrics (Switching & Routing)

The ATN 910D-A is not just a switch; it’s a carrier-grade router. Below are the critical performance line items.

| Parameter | Value | | :--- | :--- | | Switching Capacity | 24 Gbps (non-blocking) | | Forwarding Rate (64-byte packets) | 18 Mpps (million packets per second) | | Maximum MAC address entries | 32,000 | | Maximum IPv4 route entries | 60,000 (FIB) | | Maximum IPv6 route entries | 30,000 | | Maximum VLAN IDs | 4,094 | | ACL rules (per direction) | 1,000 | | Jumbo frame | Up to 9,600 bytes |

Interface & Port Density

The ATN 910D-A is modular but comes with fixed ports plus slots:

Max switching capacity: ~8 Gbit/s (non-blocking)

6. Software & Management

The device runs on Huawei VRP8 (Versatile Routing Platform version 8) – the same OS used across NE, CX, and AR series routers.

The device is also compatible with Huawei iMaster NCE (formerly Agile Controller) for SDN-based zero-touch provisioning (ZTP) and closed-loop SLA assurance.

Typical Use Cases

Example checklist for a single‑site deployment

  1. Verify ordered model and interface card mix.
  2. Confirm optics and fiber type; test end‑to‑end fiber links.
  3. Install in 1U slot; secure rails and ground.
  4. Connect redundant power (AC or DC) and verify indicators.
  5. Connect management port to OOB network; change default credentials.
  6. Load tested firmware version; enable SSH, disable insecure services.
  7. Configure interfaces, VLANs, routing (OSPF/BGP) and clock sync settings.
  8. Enable protection (BFD + FRR) for critical links; run failover tests.
  9. Integrate with NMS/iMaster and schedule monitoring/alarms.
  10. Document configuration backup and recovery procedure.

If you want, I can:

  1. Summarize the device’s purpose and key specs (based on publicly available Huawei product overviews).
  2. Give you a structured outline you can use to write your own paper, including where to find authoritative data.
  3. Explain how to interpret datasheet parameters for this type of access router.

Alternatives to Consider

| If you need… | Consider… | |--------------|------------| | Higher throughput (10+ Gbps) | Huawei AR651W or NetEngine AR6700 | | Built-in PoE | Cisco ISR 1100-4P | | Lower cost, similar ruggedness | MikroTik RB2011UiAS-IN (less carrier-grade) | | Full SD-WAN native | FortiGate 40F rugged series |

All songs are covers, they are not by the original artist. We pay licensing to original artists/publishers via MCPS-PRS. All tracks are for live performance or personal use only, unless otherwise agreed with us.