The Huawei ATN 910D-A is a compact, high-capacity 1U case-shaped service router designed primarily for mobile base station access (2G/3G/4G/5G) and VIP private line services in enterprise and ISP environments. It is positioned as a 5G-ready access-layer device featuring high density and carrier-grade reliability. Key Technical Specifications
According to the official ATN 910D-A Brochure, the primary hardware specs are: System Capacity: 800 Gbps switching capacity. Form Factor: 1U height (442mm x 220mm x 44.45mm). Weight: Approximately 4 kg. Typical Power Consumption: 180W.
Operating Temperature: Supports wide range from -40°C to +65°C, making it suitable for outdoor cabinet deployments. Power Supply: Dual DC/AC 1+1 backup for high reliability. Interface Density
The device provides a high-density port configuration to support varied bandwidth requirements: 4 x 100GE / 50GE ports 16 x 25GE / 10GE / GE ports 8 x 10GE / GE / FE ports Exclusive Software & Protocol Support
The ATN 910D-A leverages advanced networking protocols to facilitate 5G and industrial applications:
Protocols: Supports SRv6 (Segment Routing over IPv6), EVPN (Ethernet VPN), and SRv6 Policy for intelligent traffic engineering.
Network Slicing: Capabilities based on FlexE (Flexible Ethernet) deployment to isolate services.
Synchronization: High-precision clock synchronization including 1588v2, Synchronous Ethernet, and G.8275.1/G.8275.2.
OAM & Monitoring: Built-in iFIT (In-situ Flow Information Telemetry), NQA, and TWAMP for real-time network performance monitoring.
L2/L3 Features: Full support for MPLS LDP, RSVP-TE, VPLS, and L3VPN. Maintenance and Management
Huawei provides centralized support for the ATN series through the Huawei Enterprise Support Portal, offering manuals, software updates, and troubleshooting guides. For larger deployments, it integrates with the CX600/NE40E series using a unified software platform for streamlined operations. ATN Series - Huawei Carrier
The Huawei ATN 910D-A (often searched with the variations like 910DA) is a high-performance, 1U fixed-box router designed specifically for 5G mobile backhaul and multi-service aggregation. Positioned at the access and aggregation layers, it provides the "last mile" connectivity for base station transport and high-end VIP private lines. Exclusive Technical Specifications
The ATN 910D-A stands out in the ATN 910 Series for its massive switching capacity and high-density port configuration within a compact 1U form factor. Switching Capacity: 800 Gbps (bi-directional). Port Density: 4 x 100GE/50GE ports. 16 x 25GE/10GE/GE ports. 8 x 10GE/GE/FE ports. Dimensions: 442 mm × 220 mm × 44.45 mm (1U height). Weight: Approximately 4 kg. Power Consumption: 180W typical.
Operating Temperature: –40ºC to +65ºC, making it suitable for outdoor cabinet deployments.
Power Redundancy: Supports dual DC/AC inputs with 1+1 backup. Core 5G-Ready Features
The router is built on a programmable NP architecture, ensuring it can adapt to future network requirements without hardware overhauls.
Network Slicing (FlexE): Supports Flexible Ethernet (FlexE) to divide a single physical port into multiple logical slices. This ensures strict bandwidth isolation for different services, such as mission-critical industrial data vs. general consumer traffic.
Advanced Protocols: Fully supports SRv6 (Segment Routing over IPv6) and EVPN (Ethernet VPN), which simplify network protocols and enable automated service provisioning.
High-Precision Synchronization: Essential for 5G networks, it supports 1588v2, G.8275.1 (full-mode OC, TC, BC), and Synchronous Ethernet clocking.
Intelligent O&M (iFIT): Uses In-situ Flow Information Telemetry (iFIT) for millisecond-level in-band flow detection. This allows operators to visualize service quality and demarcate faults within minutes. Reliability and Deployment
The ATN 910D-A is engineered for carrier-grade reliability with millisecond-level fault detection.
Fast Protection Switching: Supports IP FRR, LDP FRR, and TI-LFA (Topology-Independent Loop-Free Alternate) to ensure protection switching under 50ms.
Environmental Hardening: Its wide temperature range and industrial-grade components allow it to be co-deployed with base stations in harsh environments.
Plug-and-Play: Supports automated rollout through iMaster NCE, significantly reducing the time required for large-scale site deployments. Market Positioning and Cost
As a part of the Huawei ATN Series, the 910D-A helps carriers lower the Total Cost of Ownership (TCO) by unifying 2G, 3G, 4G, and 5G transport on a single platform. Pricing for these units typically ranges from $13,000 to $15,000 for basic configurations, though specialized high-anti-corrosion or high-capacity models can exceed $35,000 depending on the region and license packages. ATN910B - Huawei Carrier
The Huawei ATN 910D-A is a compact 1U, 800Gbps high-capacity fixed-port router designed for 5G base station access and VIP private line services. It supports advanced features such as FlexE slicing, SRv6, and iFIT, optimized for high-density, low-latency network environments with an operating temperature range of -40°C to +65°C. Detailed technical specifications and manuals are available on the Huawei Support Site. ATN 910D-A Brochure v2.0 - Scribd
The Huawei ATN 910D-A is a compact, high-capacity 1U case-shaped router designed primarily for 5G base station access and VIP private line services. It is part of Huawei's NetEngine series focused on intelligent IP networks and FMC (Fixed-Mobile Convergence). Technical Specifications Specification Switching Capacity Interface Density 4 x 100GE/50GE + 16 x 25GE/10GE/GE + 8 x 10GE/GE/FE Dimensions (WxDxH) 442 mm x 220 mm x 44.45 mm (1U) Weight Typical Power Consumption Power Supply DC/AC, 1+1 redundancy Operating Temperature -40°C to +65°C (supports outdoor deployment) Key Features
High Performance: Designed with 800G capacity to support the high bandwidth requirements of 5G networks.
Protocols & Technologies: Supports advanced networking features including SRv6 (Segment Routing over IPv6), EVPN, FlexE slicing, and high-precision clock synchronization (1588v2, G.8275.1).
Compact Design: At only 220mm depth, it is compatible with 300mm deep cabinets, making it suitable for space-constrained edge locations.
Reliability: Features industrial-level design with redundant power and fan systems. Resources & Support
Official Documentation: You can find detailed manuals, installation guides, and software updates on the Huawei Enterprise Support page for ATN 910D-A .
Product Brochure: A comprehensive ATN 910D-A Brochure (PDF) is available on platforms like Scribd. ATN 910D-A Brochure v2.0 - Scribd
Huawei ATN 910D-A is a compact, high-capacity 1U router designed specifically for 5G mobile backhaul and VIP private line services
. It serves as a 5G-ready access device that supports high-density 100GE interfaces and advanced features like network slicing and SRv6. Huawei Carrier Key Technical Specifications
The ATN 910D-A is built to handle the massive bandwidth requirements of 5G networks while maintaining a small physical footprint. Switching Capacity : Supports up to Port Density Dimensions : Standard 1U height ( : Dual DC/AC power supply with backup; typical power consumption is approximately Environment : Operating temperature range from , making it suitable for outdoor cabinet installations. Advanced 5G Features Network Slicing huawei+atn+910da+datasheet+exclusive
(Flexible Ethernet) to provide hardware-level isolation for different services, ensuring that private line traffic is not affected by mobile traffic. Next-Gen Protocols : Supports
(Segment Routing over IPv6) and EVPN for simplified network programming and automated service deployment. Clock Synchronization : Features high-precision clock synchronization including and Synchronous Ethernet. Intelligent O&M : Incorporates
(In-situ Flow Information Telemetry) for real-time service quality monitoring and hop-by-hop performance detection. Huawei Carrier Documentation and Setup
For detailed technical guidance, you can refer to the following official and community resources: Official Support Huawei Support Portal
provides technical manuals, license queries, and software upgrade instructions. Installation Guides
: Step-by-step hardware setup, including rack mounting and cabling, is available via the ATN 910D-A Installation Guide Product Brochure
: A comprehensive visual overview of specifications can be found in the ATN 910D-A Brochure on this device or details about specific transceivers compatible with its 100GE ports? Huawei ATN 910D-A Support Guide, Manuals & PDF
The Huawei NetEngine ATN 910D-A is a compact, high-performance multi-service access router designed specifically for 5G mobile backhaul and VIP private line services. Part of the ATN 910D series, it enables carriers to transition from traditional MPLS to advanced SRv6 architectures with massive throughput in a 1U form factor. ⚡ Key Technical Specifications ATN 910D-A
is engineered for high-density environments, offering line-rate throughput across a variety of port types. Form Factor: 1U fixed chassis, 220mm depth.
Switching Capacity: Up to 880Gbps (bidirectional) for the series.
Interface Support: High-density 100GE, 50GE, 25GE, 10GE, and GE/FE ports.
Uplink Access: Supports 50GE and 100GE uplinks to meet evolving traffic demands.
Forwarding Performance: Optimized for 256-byte packets and larger with zero-loss recovery.
Reliability: 1+1 redundancy for power supplies (AC/DC) and advanced heat dissipation design. 🚀 Advanced Network Features
This router serves as a critical bridge for network evolution, supporting modern protocols that simplify operations and enhance service quality.
SRv6 & EVPN: Simplifies tunnel technology and automates MAC learning to reduce deployment costs.
5G Network Slicing: Uses FlexAlgo and FlexE (Flexible Ethernet) to provide hardware-isolated network slices for different service types.
Precision Timing: Supports 1588v2 high-precision clocks and G.8275.1, essential for 5G synchronization.
SRv6 Compression: Implements header compression to improve bandwidth efficiency during MPLS-to-SRv6 migrations. 🛠️ Deployment & Maintenance ATN 910D-A
is built for industrial-grade reliability, capable of operating in wide temperature ranges from -40°C to +65°C.
Plug-and-Play: Supports zero-site commissioning and remote maintenance via Huawei's Support Portal.
Intelligent O&M: Real-time performance detection using TWAMP and IPFPM allows for rapid fault location without affecting live traffic.
Fast Failover: Features TI-LFA with failover times under 1.4 ms, ensuring continuous service during link failures. If you'd like more details, I can help you find: Specific ordering codes or part numbers for the ATN 910D-A
A comparison between the 910D-A and the 910C or 910D-B models. Installation guides for outdoor cabinet deployments. ATN910C - Huawei Carrier
The Huawei ATN 910D-A is a large-capacity, 1U case-shaped router designed for 5G mobile backhaul and VIP private line services. It features an 880Gbps switching capacity and high-density 100GE ports, making it suitable for large-scale access device deployment. Key Technical Specifications
The ATN 910D-A is built for high-performance intelligent IP networks with a focus on 5G-ready features. Switching Capacity: 880Gbps. Interface Density: 4 x 100GE/50GE ports. 16 x 25GE/10GE/GE ports. 8 x 10GE/GE/FE ports. Dimensions: 442mm x 220mm x 44.45mm (1U height).
Weight: Approximately 4.2 kg (DC) to 4.3 kg (AC) without packaging.
Power Consumption: Typical power consumption is approximately 180W.
Power Redundancy: Supports dual DC/AC power inputs with 1+1 backup.
Operating Temperature: Industrial-grade design supporting -40°C to +65°C, allowing for outdoor cabinet deployment. Advanced Features
The router supports modern networking protocols required for high-speed data transmission and 5G slicing.
L3 Features: Supports OSPF, BGP, ISIS, Static routes, and advanced IPv6 features like 6PE and 6VPE.
SR/SRv6 & EVPN: Fully supports Segment Routing (SR) and SRv6 (BE/Policy), as well as Ethernet VPN (EVPN) for both L2 and L3 services.
Network Slicing: Implements slicing based on FlexE deployment to meet different 5G service requirements.
Synchronization: High-precision clock synchronization including IEEE 1588v2, G.8275.1, and Synchronous Ethernet. The Huawei ATN 910D-A is a compact, high-capacity
OAM & Management: Includes features like iFIT (in-situ Flow Information Telemetry) for real-time performance monitoring and Plug-and-Play (PnP) for simplified deployment. Application Scenarios ATN 910D-A Brochure v2.0 | PDF - Scribd
The Huawei ATN 910D-A is a compact 1U fixed-box router designed for 5G access and high-density 100GE/50GE port configurations. It features an 800 Gbps switching capacity and supports advanced technologies like SRv6, EVPN, and iFIT for real-time network monitoring. For more detailed technical documentation and manuals, you can visit the Huawei ATN 910D-A Support Page. ATN Series - Huawei Carrier
Huawei ATN 910DA Datasheet: Exclusive Insights and Specifications
The Huawei ATN 910DA is a cutting-edge, high-performance access node designed to meet the evolving needs of modern telecommunications networks. As a leading player in the networking and telecommunications industry, Huawei continues to innovate and push the boundaries of what is possible with its latest offerings. In this article, we will delve into the exclusive datasheet of the Huawei ATN 910DA, exploring its key features, specifications, and benefits.
Introduction to Huawei ATN 910DA
The Huawei ATN 910DA is a versatile access node that supports a wide range of interfaces and applications, making it an ideal solution for various network deployment scenarios. This node is designed to provide high-speed, reliable, and secure connectivity for a large number of users, supporting a broad range of services, including broadband access, voice, and data.
Key Features and Benefits
The Huawei ATN 910DA datasheet reveals a comprehensive set of features and benefits that make it an attractive solution for network operators and service providers. Some of the key features include:
Technical Specifications
The Huawei ATN 910DA datasheet provides detailed technical specifications, which are summarized below:
Exclusive Insights
The Huawei ATN 910DA datasheet also reveals some exclusive insights into the node's capabilities and design. For instance:
Market and Competitive Landscape
The access node market is highly competitive, with several major players vying for market share. However, the Huawei ATN 910DA datasheet demonstrates that Huawei remains a leader in the industry, with a strong focus on innovation, performance, and customer needs.
Conclusion
The Huawei ATN 910DA datasheet provides a comprehensive overview of this powerful access node, highlighting its key features, specifications, and benefits. With its high-performance hardware platform, advanced QoS capabilities, and robust security features, the ATN 910DA is an attractive solution for network operators and service providers seeking to upgrade their networks and deliver high-quality services to their customers. As the telecommunications industry continues to evolve, Huawei's ATN 910DA is well-positioned to play a critical role in shaping the future of networking and communication.
The Huawei ATN 910D-A is a compact, high-performance router designed for high-density 5G-ready access and metropolitan area networks (MAN). As a core member of the Huawei ATN Series, it bridges the gap between traditional access and next-generation 100G networking by offering a massive 800 Gbps switching capacity in a slim 1U form factor. Huawei ATN 910D-A Key Specifications
The ATN 910D-A is engineered to handle massive data throughput required by 5G base stations and VIP private line services. Technical Specification Switching Capacity Form Factor 1U Height, 220mm Depth Interface Density 4100GE/50GE + 1625GE/10GE/GE + 8*10GE/GE/FE Operating Temp -40°C to +65°C (Support for outdoor deployment) Redundancy Dual DC/AC, 1+1 backup Clock Sync High-precision 1588v2 clock synchronization Core Features and Exclusive Technologies
5G-Ready Capabilities: Built to support SR/SRv6 (Segment Routing over IPv6), EVPN, and iFIT (in-situ Flow Information Telemetry) for real-time network performance monitoring.
FlexE Slicing: Provides hard network slicing based on FlexE (Flexible Ethernet) deployment, allowing for physical isolation of services to ensure low-latency performance for critical applications.
Ultra-Compact Design: At just 220mm deep, the unit can be co-located with base station equipment in the same cabinet, significantly reducing deployment footprints.
Industrial-Level Reliability: The device uses high-quality industrial components and advanced heat dissipation to operate in extreme environments ranging from -40°C to +65°C. Product Comparison: ATN 910D-A vs. ATN 910D-C
While both routers belong to the same series, their performance targets differ slightly for specific aggregation needs.
Capacity: The ATN 910D-A reaches 800 Gbps, while the ATN 910D-C is rated for slightly higher 880 Gbps capacity with 1.76 Tbps switching throughput.
Dimensions: Both share the 1U height, but the ATN 910D-C has a wider chassis width at 442mm.
Ports: Both support high-density 100GE/50GE ports, but the 910D-A is specifically optimized for base station access with its port mix of 100G, 25G, and GE.
Detailed documentation and firmware updates are available through the Huawei Support Portal, which requires authorized equipment accounts for specific downloads. ATN Series - Huawei Carrier
Huawei ATN 910DA Datasheet Guide
Introduction
The Huawei ATN 910DA is a high-performance, compact, and versatile network equipment designed for small to medium-sized enterprises, data centers, and service provider networks. This guide provides an overview of the Huawei ATN 910DA datasheet, highlighting its key features, specifications, and use cases.
Key Features
Specifications
Use Cases
Additional Information
Conclusion
The Huawei ATN 910DA is a versatile, high-performance network equipment suitable for various applications, including enterprise networks, data centers, and service provider networks. This guide provides a comprehensive overview of the device's key features, specifications, and use cases. For more detailed information, refer to the official Huawei ATN 910DA datasheet.
Huawei ATN 910DA Datasheet: Unlocking the Power of Advanced Networking
In the rapidly evolving landscape of modern telecommunications and networking, the demand for high-performance, scalable, and secure network infrastructure has never been more pressing. Huawei, a global leader in information and communication technology (ICT), has been at the forefront of this evolution, consistently delivering innovative solutions that cater to the complex needs of network operators, enterprises, and service providers. One such solution is the Huawei ATN 910DA, a versatile and advanced network equipment designed to meet the rigorous demands of next-generation networks. This essay provides an in-depth look at the Huawei ATN 910DA datasheet, highlighting its exclusive features and capabilities that set it apart in the competitive networking landscape.
Overview of Huawei ATN 910DA
The Huawei ATN 910DA is part of Huawei's ATN (All-Transport Network) series, which is engineered to provide a unified, intelligent, and secure transport network solution. This series is particularly noted for its ability to support a wide range of network applications, from broadband access and aggregation to the transport of high-speed data and real-time communications services.
Key Features and Specifications
High-Performance Processing: The ATN 910DA is equipped with advanced hardware and software technologies that enable high-speed packet processing and forwarding. This ensures that network services are delivered with minimal latency and maximum throughput.
Flexible Network Slicing: Supporting network slicing allows for the creation of multiple virtual networks over a shared physical infrastructure. This feature is particularly beneficial for service providers looking to offer customized network services to different customers or for different applications.
Enhanced Security: The ATN 910DA incorporates robust security features, including encryption, secure access, and threat detection and mitigation. These features are designed to protect the network and its users from a wide array of cyber threats.
Scalability and Flexibility: The platform is designed to scale, allowing network operators to easily upgrade or add new capacity as demand grows. This scalability, combined with its flexible architecture, makes the ATN 910DA suitable for a variety of network environments.
Energy Efficiency: Huawei emphasizes energy efficiency in its designs, and the ATN 910DA is no exception. With power-saving technologies and efficient cooling systems, it helps network operators reduce their operational costs and environmental footprint.
Exclusive Features
What sets the Huawei ATN 910DA apart in the market are its exclusive features tailored to meet the specific needs of modern network infrastructures:
Intelligent Network Management: The ATN 910DA comes with advanced network management capabilities, including AI-driven insights and automation tools. These enable proactive network monitoring, predictive maintenance, and rapid troubleshooting, significantly improving network reliability and operational efficiency.
Integration with Huawei Ecosystem: As part of Huawei's broader ICT ecosystem, the ATN 910DA seamlessly integrates with other Huawei solutions and products. This integration facilitates a holistic approach to network design, deployment, and management, offering customers a more streamlined and efficient experience.
Support for Future-Proof Technologies: The ATN 910DA is designed with future technologies in mind, including support for 5G, IoT, and cloud-native applications. This forward-thinking approach ensures that the platform remains relevant and valuable for years to come, providing a solid foundation for network evolution.
Conclusion
The Huawei ATN 910DA datasheet reveals a powerful and versatile networking solution that addresses the complex challenges of modern network infrastructure. With its high-performance capabilities, flexible architecture, enhanced security features, and exclusive intelligent network management tools, the ATN 910DA stands out as a leading choice for network operators and enterprises seeking to build or upgrade their network infrastructures. As the networking landscape continues to evolve, solutions like the Huawei ATN 910DA will play a crucial role in shaping the future of telecommunications and ICT.
Huawei ATN 910D-A is a compact, high-capacity 1U fixed-port router designed primarily for 5G base station access and VIP private line services
. It features an 800Gbps system capacity and supports advanced 5G-ready features such as SRv6, FlexE slicing, and high-precision clock synchronization. Key Technical Specifications System Capacity 800Gbps switching capacity Interface Density 4 x 100GE/50GE + 16 x 25GE/10GE/GE + 8 x 10GE/GE/FE Dimensions (HxWxD) 44.45mm (1U) x 442mm x 220mm Approximately 4kg Power Input Dual DC/AC, 1+1 backup redundancy Power Consumption Typical: 180W Operating Temp -40°C to +65°C, supporting outdoor cabinet deployment Exclusive & Advanced Features 5G Ready Architecture : Supports
(Segment Routing over IPv6) and EVPN for simplified network evolution and automated service deployment. Network Slicing : Utilizes
(Flexible Ethernet) technology to provide hard-pipe isolation for different services, ensuring zero interference between slices. Intelligent O&M : Integrated with
(In-situ Flow Information Telemetry) for real-time, millisecond-level service quality monitoring and fault location. High Precision Sync : Supports
and G.8275.1/G.8275.2 protocols for ultra-precise clock synchronization required by 5G networks. Carrier-Grade Reliability
: Features less than 50ms protection switching and supports technologies like
(Topology-Independent Loop-free Alternate) for rapid failover. Deployment Scenarios 5G Transport
: Ideal for base station access due to its high-density 100GE/50GE ports and compact 220mm depth, allowing it to share cabinets with wireless Baseband Units (BBU). Enterprise Private Lines
: Provides multi-service access for VIP customers using L2VPN, L3VPN, and HQoS for guaranteed service levels.
For further technical documentation and manuals, you can visit the Huawei ATN 910D Support Guide Enterprise Product DataSheet ATN 910D-A Brochure v2.0 | PDF - Scribd
This article is designed to serve as a deep-dive resource for network engineers, telecom procurement specialists, and infrastructure planners looking for technical specifics beyond the standard brochure.
| Feature | Huawei ATN 910D-A | Cisco IR1101 | Nokia 7210 SAS-M | |---------|------------------|--------------|------------------| | Fanless outdoor | Yes | Yes (with kit) | No | | Native E1/T1 | Yes (module) | No (external CEM) | Yes | | MPLS-TP | Full | Limited | Full | | 1588v2 TC/BC | Yes (boundary clock) | Yes (OC) | Yes | | Power (max) | 30W | 45W | 60W |
| Metric | Value | |----------------------------|----------------------------------------| | Throughput | 32 Gbit/s (non‑blocking) | | MAC table size | 32K entries | | IPv4 FIB | 16K routes | | MPLS labels | 8K | | L2 VPN instances | 1,000 | | L3 VPN instances | 500 | | Jumbo frame support | up to 9,216 bytes | | QoS queues per port | 8 |
Let’s dive into the hard numbers. Here are the critical specifications that define the performance of the ATN 910DA.
| Feature | ATN 910DA | Cisco ASR 920 | Nokia 7210 SAS‑M | |-----------------------|----------------|----------------|------------------| | Switching capacity | 32 Gbit/s | 16–24 Gbit/s | 24 Gbit/s | | 10GE ports (max) | 2 | 2 | 2 | | SyncE + 1588v2 | Yes | Yes (license) | Yes | | Operating temp range | –40°C to +65°C | –40°C to +65°C | –40°C to +65°C | | Segment routing | Yes (license) | Yes | Yes (license) | | MPLS‑TP OAM | Native | Over IP/MPLS | Native | | Typical power | 35 W | 60 W | 45 W |