Blog Title: I--- Download Driver Cutting Plotter Jinka 1351: A Complete Setup Guide
Post Date: 04/25/2026 | Category: Plotter Drivers & Software
Introduction
If you have just purchased a Jinka 1351 cutting plotter, you are likely eager to start cutting vinyl, heat transfer film, or paper. However, to get this machine to communicate with your computer (running Windows, Mac, or even CorelDRAW), you need the correct driver.
Searching for "i--- Download Driver Cutting Plotter Jinka 1351" often leads to confusing, broken, or suspicious links. In this post, we will walk you through exactly how to download, install, and configure the right driver for your Jinka 1351 model.
Why is the driver important?
The driver acts as the translator between your design software (like FlexiSIGN, SignMaster, or Sure Cuts A Lot) and the Jinka 1351 motion hardware. Without the correct driver, your computer will not recognize the USB or COM port connection.
Step 1: Where to download the official driver
Instead of using third-party “driver download” sites (which often contain malware), use this path:
.zip file named Jinka_1351_Driver_v2.4).If the official site is down, the driver is often compatible with SignMaster or ArtCut drivers for similar 135cm plotters.
Step 2: Install the driver (Windows 10/11)
Setup.exe as Administrator.Step 3: Configure in your cutting software
The most common issue users face after installing the driver is the software not detecting the plotter. Here is the fix:
Troubleshooting "Driver Not Working"
Alternative: Use a universal driver
If you cannot find the exact Jinka 1351 driver, the HP-GL driver (Generic HPGL Plotter) often works. Install it manually via Windows Devices → Add Printer → “HP DesignJet” → Generic → HP-GL/2.
Final advice
Do not pay for “driver download tools” that claim to fix your Jinka 1351. The correct driver is free. If your machine is brand new, the driver is usually included on the mini CD-ROM inside your plotter’s box.
Have questions about your Jinka 1351? Leave a comment below or join our plotter user group.
Happy cutting!
Downloading and Installing the Jinka 1351 Cutting Plotter Driver: A Comprehensive Guide
Are you in search of a reliable and efficient cutting plotter driver for your Jinka 1351 device? Look no further! In this article, we will walk you through the process of downloading and installing the Jinka 1351 cutting plotter driver, ensuring that you can optimize your device's performance and streamline your workflow.
Introduction to the Jinka 1351 Cutting Plotter
The Jinka 1351 cutting plotter is a high-performance device designed for precision cutting and plotting applications. With its advanced features and robust construction, this device has become a popular choice among professionals and hobbyists alike. However, to unlock its full potential, you need to install the correct driver software.
Why Do You Need a Cutting Plotter Driver?
A cutting plotter driver acts as a bridge between your computer and the Jinka 1351 device, enabling seamless communication and data transfer. The driver software converts print data from your computer into a format that the cutting plotter can understand, allowing you to produce high-quality cuts and plots with precision and accuracy.
Downloading the Jinka 1351 Cutting Plotter Driver
To download the Jinka 1351 cutting plotter driver, follow these steps:
Step-by-Step Download and Installation Process
Once you have downloaded the driver software, follow these steps to install it:
For Windows Users:
For macOS Users:
Configuring the Jinka 1351 Cutting Plotter Driver
After installing the driver software, you may need to configure the settings to optimize your device's performance. Follow these steps:
Troubleshooting Common Issues
If you encounter any issues during the download or installation process, refer to the troubleshooting section below:
Conclusion
In conclusion, downloading and installing the Jinka 1351 cutting plotter driver is a straightforward process that requires attention to detail. By following the steps outlined in this article, you can ensure that your device is properly configured and optimized for high-quality cutting and plotting applications. If you encounter any issues or have further questions, do not hesitate to contact the manufacturer's support team or consult the user manual.
i--- Download Driver Cutting Plotter Jinka 1351
By searching for "i--- Download Driver Cutting Plotter Jinka 1351," you can find various online resources and websites that offer the driver software for download. However, be cautious when downloading from third-party websites, and ensure that you verify the file's integrity and authenticity to avoid any potential security risks.
Downloads and Resources
By following this comprehensive guide, you can successfully download, install, and configure the Jinka 1351 cutting plotter driver, ensuring optimal performance and precision cutting and plotting applications.
The Jinka 1351 (including the JK-1351 and PE-1351 variants) is a popular entry-level cutting plotter designed for vinyl and sticker production. To operate this hardware, installing the correct driver is essential for communication between your computer and the plotter’s stepper motor. Driver Download & Official Sources
It is highly recommended to download drivers only from verified manufacturer or regional distributor sites to avoid corrupted or outdated files.
Official Jinka Indonesia Portal: Provides direct download links via Google Drive for various models.
JK / XL Series (Cut Only): Available on the Jinka Indonesia Download Page XL PRO 1351 (Only Cut): Specific drivers for this high-width model. PE PRO 1353 1351 (Auto Contour) : Drivers for models with advanced alignment features.
Alternative Support: For legacy or specific versions like the Jinka 1351 v2.4
, sources like jinkatech.com provide Windows 10 x64 compatible packages. Installation Guide
Preparation: Disconnect the plotter and other non-essential USB devices (scanners, other plotters) to prevent COM port conflicts.
Run as Administrator: Extract the downloaded ZIP file, right-click setup.exe, and select Run as administrator to avoid registry errors.
Connection: Connect the plotter via USB or Serial (COM) cable and power it on. Port Configuration: Open Device Manager and look under Ports (COM & LPT) for "USB Serial Port" or " JINKA 1351
In your cutting software, manually assign the port (often COM3 is recommended to avoid Bluetooth conflicts).
Restart: Reboot your computer to finalize the driver integration. Software Compatibility Jinka 1351
driver serves as a bridge for several professional design and cutting applications: Driver Jinka 1351 28 - Facebook
To download the driver for the Jinka 1351 cutting plotter Go to product viewer dialog for this item.
, you should primarily use the official resources provided by the manufacturer or their regional distributors to ensure compatibility and system safety. Driver Download Sources
Jinka Indonesia Official: The most reliable source for various models including the JK and XL series. Access the Download Link Library which hosts drivers for: Jinka JK/XL (Cut Only) Jinka XL 2022 (Semi-Auto Contour) (Only Cut/Semi-Auto)
PlotCalc Software: Offers dedicated plug-ins and drivers specifically for the JinKa XE-1351 and models, particularly for integration with CorelDRAW.
SignCut Freshdesk: Provides generic USB drivers for SignCut-compatible plotters which often include Jinka models. Installation Steps
Download & Extract: Download the driver matching your specific model (e.g.,
). Extract the compressed file (ZIP or RAR) using tools like WinRAR or 7-Zip.
Run Setup: Open the folder and run setup.exe as an administrator. Follow the on-screen prompts to select your preferred language and installation path.
Connect Hardware: Plug your plotter into the computer using a USB or COM cable. If using USB, the system should recognize it as a new "USB Serial Port" in the Device Manager. i--- Download Driver Cutting Plotter Jinka 1351
Software Configuration: Open your cutting software (CorelDRAW, Artcut, or SignMaster). In the device settings, select the correct model name and the COM port assigned to the plotter. Technical Specifications (Model 1351PE) Maximum Feed Width: 1350mm. Maximum Cutting Width: 1210mm. Speed/Force: Up to 800mm/s with 10-500g force.
OS Compatibility: Supports Windows XP, Vista, 7, 8, 10, and 11. Driver Jinka 1351 28 - Facebook
To successfully set up your Jinka 1351 cutting plotter, downloading and installing the correct driver is the essential first step to ensuring your computer can communicate with the hardware. The Jinka 1351 is a popular 48-inch vinyl cutter known for its precision in handling materials like vinyl, cardstock, and paper for professional signage and decals. Where to Download the Jinka 1351 Driver
For the most reliable software, always use verified sources to avoid corrupted files or malware often found on generic links.
Official JINKA Indonesia Support: The most comprehensive repository of drivers for various Jinka models (PE PRO, XL PRO, YS, and others) is available on the Jinka Indonesia Download Page. Model-Specific Links:
For the Jinka XL PRO 1351 (Only Cut), use this specific Google Drive Link.
For the Jinka 1351PE, specialized software like PlotCalc (CorelDRAW Plug-In) can be used to manage cutting velocity and force directly from your design software. Installation Guide for Windows 10 & 11
Modern operating systems require specific steps to ensure the USB-to-Serial communication functions correctly.
Preparation: Unplug the plotter and other non-essential USB devices (scanners, other cutters) to avoid COM port conflicts.
Extract Files: Use a tool like WinRAR or 7-Zip to unzip the downloaded driver package.
Run as Administrator: Right-click the setup.exe file and select Run as Administrator to ensure the driver has the necessary registry permissions.
Manual Port Assignment: During setup, choose "Manual Setup" if prompted. Assigning the device to COM3 is a common fix to avoid conflicts with laptop Bluetooth adapters.
Verification: Once installed, check Device Manager under "Ports (COM & LPT)." You should see an entry like "JINKA USB PRINT" or "USB Serial Port". Software Compatibility
The Jinka 1351 is highly versatile and integrates with standard industry design software: Software for JinKa XE-1351 plotter - PlotCalc
To successfully download and install the driver for your Jinka 1351 cutting plotter
, you must first identify your specific model variant (e.g., standard "Only Cut" or "Auto Contour Cut"), as they require different software packages. 1. Official Download Resources
You can access official drivers and setup software from manufacturer and community support sites: Jinka Indonesia (Official)
: Provides direct download links via Google Drive for various versions, including the JK/XL Only Cut
: Offers specialized plugins and software for models like the JinKa XE-1351 , specifically optimized for use with SignTools 4 : Maintains dedicated setup instructions Jinka JK1351 , including serial (COM) cable requirements 2. Installation Steps
Follow these steps to ensure your computer correctly communicates with the plotter: Extract the Files
: Download the driver package and extract it using a tool like : Open the folder and double-click
. Follow the on-screen prompts to choose your language and installation directory. USB Connection : If connecting via USB, you must install the USB driver
first to create a virtual COM port. Windows may attempt to install it automatically if the hardware is plugged in during a restart Verification : After installation, check the Device Manager Ports (COM & LPT) to ensure " JINKA 1351 " is listed 3. Software Compatibility & Settings Jinka 1351
is compatible with several professional design and cutting applications: Software for JinKa JK-1351PE plotter - PlotCalc 2 Dec 2025 —
To download the driver for the Jinka 1351 Cutting Plotter access official resources from Jinka Indonesia
, which provides specific drivers based on your machine's capabilities (e.g., standard cutting vs. contour cutting). Driver Download Links Choose the link that matches your specific model type: Standard Cutting (Only Cut) Download for JK/XL Models Semi-Auto Contour Cut Download for XL 2022 Models Auto Contour Cut Download for XL Pro V Models General Driver Repository : Visit the Jinka Indonesia Download Page for a complete list of supported models. Installation Steps Extract Files : Once downloaded, extract the files using a tool like : Open the folder and run Configure Connection : Most Jinka plotters use a Direct COM Port connection. Ensure your software (e.g., SignMaster ) is set to this port. Verification : After installation, check the Windows Device Manager Ports (COM & LPT) to confirm the device is recognized as JINKA 1351 Troubleshooting
: If the plotter is not recognized, try switching to a different USB port. Legacy Systems
: If you are using older hardware, you may need to run the installer in Compatibility Mode for Windows XP or Windows 7. Software Plugins : For users working with , specialized plug-ins like
can help bridge the connection between the design software and the plotter. Software for JinKa XE-1351 plotter - PlotCalc
Jinka 1351 Go to product viewer dialog for this item. is a large-format cutting plotter widely used for vinyl cutting and signage. To operate it effectively, you must install the specific USB or COM port drivers and compatible design software. 1. Official Driver Download Sources
You can download the necessary drivers from these verified locations: Blog Title: I--- Download Driver Cutting Plotter Jinka
Jinka Indonesia Official Portal: Provides dedicated download links for various Jinka series, including standard cutting and semi-auto contour models. Tipe JK/XL (Only Cut) Driver Tipe XL 2022 (Semi-Auto Contour) Driver
SignCut Support: Offers USB Drivers for Cutting Plotters compatible with Jinka models if using SignCut software. 2. Compatible Cutting Software
Drivers alone are often insufficient; you need software to send designs to the plotter. Popular options include:
AnyCut: Often bundled with the machine, it supports direct USB connection and manual contour cutting.
SignMaster: A professional choice offering Basic, ARMS, and Pro versions for different Jinka models.
CorelDRAW Plugins: Plugins like PlotCalc allow you to cut directly from CorelDRAW.
Flexi / Artcut: Traditional industry-standard software compatible with the Jinka 1351PE series. 3. Installation Steps Software for JinKa XE-1351 plotter - PlotCalc
This overview provides a general insight into what one might expect from a cutting plotter like the Jinka 1351 and its driver. For specific details, it's always best to consult the official documentation or contact the manufacturer directly.
To download the driver for the JINKA 1351 cutting plotter , you should ideally use the official manufacturer or authorized distributor resources to ensure compatibility and system security. Driver Download Sources Manufacturer Support
: The primary source for official drivers is through the manufacturer's regional support sites, such as the Jinka Indonesia Support
, which often hosts version-specific files like "Jinka_1351_Driver_v2.4_Win10_x64.zip". USB Controller Drivers
: Most Jinka plotters use a CH340 or CH341 USB-to-Serial chip. If your computer doesn't recognize the plotter when plugged in, you may need the CH341SER.EXE driver from Nanjing Qinheng Microelectronics. Specific Model Variants
: Ensure you select the correct version for your hardware; for example, the JINKA PRO 1351 may require different files than the JINKA PRO 1351 SA (Semi-Auto Contour). Nanjing Qinheng Microelectronics Co., Ltd. Installation Steps Prepare the System
: Disconnect all other USB devices to avoid COM port conflicts and uninstall any previous plotter drivers through the Windows Device Manager. Extract and Run
: Download the driver ZIP file, extract it using a tool like WinRAR, and run the Administrator Port Configuration
: Once installed, check your Device Manager under "Ports (COM & LPT)." The plotter typically works best on with a bit rate of and Flow Control set to Software Integration : If you are using software like SignMaster
or Flexi, select the corresponding Jinka 1351 model in the production manager and match it to the COM port identified in Step 3. SignMaster or Artcut) once the driver is installed? Driver Jinka 1351 28 - Facebook
To successfully use your Jinka 1351 cutting plotter, installing the correct driver is the essential first step for communication between your computer and the hardware. This driver acts as the bridge that allows design software like CorelDraw, Artcut, or SignMaster to send precise cutting commands to the plotter. Where to Download the Jinka 1351
You can find official and compatible drivers through several verified channels:
Official Manufacturer Support: The JINKA Indonesia Support Page provides a comprehensive "JINKA SOFTWARE" folder containing USB drivers for the XE and XL series, including the CH341SER driver often used for Jinka machines. Specific Model Links
: For targeted downloads, Jinka Indonesia offers direct Google Drive links for various 1351 models: Only Cut Models: Tipe XL PRO 1351 (Only Cut) Auto Contour Models: Tipe PE PRO 1353 1353 (Auto Contour Cut)
Software-Specific Portals: If you use SignCut, they provide specific USB drivers for compatible cutting plotters. Installation Steps for Windows (10/11) Follow these steps to ensure a stable connection:
Extract the Files: Use a tool like WinRAR to unzip the downloaded driver package.
Run Setup: Locate the setup.exe file within the extracted folder. Right-click it and select "Run as Administrator".
Connect Hardware: Plug the USB cable into both the plotter and your computer. Turn the plotter on.
Verify in Device Manager: Open "Device Manager" on your PC and look under Ports (COM & LPT). You should see a "USB-SERIAL CH340" or "JINKA USB" entry, indicating the driver is active. Configure Software:
In your design software (e.g., Artcut or CorelDraw), go to the "Cut" or "Plot" settings Select the device model (e.g., Jinka 1351 or Generic HPGL ). Choose the correct COM Port identified in Step 4. Common Issues and Troubleshooting Software for JinKa XE-1351 plotter - PlotCalc
The Jinka 1351 is a popular, budget-friendly vinyl cutting plotter used by small sign-making businesses and hobbyists. It typically features a 135 cm cutting width, supports manual or auto registration mark reading for contour cutting, and communicates with PCs via a USB port or serial (COM) port.
However, like many Chinese-manufactured plotters (often rebranded as Liyu, Pulinx, or GCC clones), the driver installation is not automatic. Users frequently encounter the dreaded “i---” error on the plotter’s LCD screen or within the cutting software (e.g., SignMaster, ArtCut, FlexiSIGN).
The Jinka 1351 Cutting Plotter is a reliable workhorse in the vinyl cutting industry. However, finding the correct driver for modern operating systems like Windows 10 or Windows 11 can be a challenge. If your computer fails to recognize the plotter via USB, or if the cutter performs erratic movements, you likely need to update or reinstall the driver. This page provides a direct download link for the Jinka 1351 driver, along with a step-by-step installation guide to get your machine back to work.
If you cannot find the driver, you can use a software emulation trick: Visit the official Jinka China support page (or
If you completed the driver installation and the error remains, try these fixes:
The keyword “i--- Download Driver Cutting Plotter Jinka 1351” suggests you need a reliable source. Be very careful: many driver download websites are filled with malware or fake “driver updater” scams.