Intelilite+amf+25+default+password __exclusive__ | RECENT · Solution |

Here is the complete text regarding the InteliLite AMF 25 default password:

---

Q1: Is the default password for all Intelilite models the same?

A: Most DSE controllers (AMF 20, 25, 30, 40, 45) use 0000 as default. However, the Intelilite AMF 25 specifically uses 0000. Some older DSE 5000 series used 1234.

1. Deep Sea Electronics (DSE) Controllers (e.g., DSE7320, DSE7310)

If your controller is a DSE module (often searched alongside "InteliLite"), the front panel access is numerical. intelilite+amf+25+default+password

Front Panel (HMI) Access:

• User Level (Level 1):
  • Password: 1234
  • Access: View status and meters only.
• Engineer Level (Level 2):
  • Password: 1520
  • Access: Adjustment of settings, breaker trips, and engine parameters.
• OEM Level (Level 3):
  • Password: Not published publicly (varies by firmware version).
  • Access: Deep configuration. Usually requires contacting Deep Sea Electronics support or an authorized distributor.

PC Software (DSE Configuration Suite):

• Password: Usually blank (no password) for the initial connection unless the "PC Password" feature has been enabled in the profile.

---

Default Access Credentials

| Parameter | Value | |-----------|-------| | Default Username | comap | | Default Password | comap |

Note: The controller uses a numeric keypad for local entry. The password comap is entered as 26627 using the telephone keypad mapping (C=2, O=6, M=6, A=2, P=7). Here is the complete text regarding the InteliLite

Via DSE Software:

1. Go to Tools > Change Password.
2. Enter old password (0000), then new password.
3. Write changes to the module.

Recommended passwords: Use 6-8 digits that have personal meaning but are not easily guessed. Example: 490215 (your service van number + day of month). Write it down in a secure location (not taped to the controller!).

---

Q2: Can I use letters in the password?

A: No. The AMF 25 only accepts numeric digits (0-9). Q1: Is the default password for all Intelilite

3.3 SCADA / BMS Integration

• Many systems integrate the AMF 25 via Modbus TCP/RTU. The default password often grants write access to critical coils and registers.