Ipm17-002 Motherboard Manual ((link)) Official

The (also known as the ) is an Intel-based micro-ATX motherboard manufactured by Pegatron and primarily used in HP and Compaq desktop computers (such as the HP Pavilion 510 series). 1. Board Specifications Form Factor: Micro-ATX (24.0 x 24.0 cm).

Socket: LGA 1151 (Supports 6th Generation Intel Core "Skylake" processors). Chipset: Intel H170. Memory: Two 288-pin DDR4 UDIMM sockets. Supports PC4-17000 (DDR4-2133). Maximum capacity: 16 GB (2 x 8 GB). Expansion Slots: One PCI Express x16 (Gen 3.0).

One M.2 socket 1, key A (typically for Wi-Fi/Bluetooth cards). 2. Internal Connectors & Storage SATA: Two SATA 3.0 ports (6 Gb/s) for HDDs or SSDs. Power: One 24-pin ATX main power connector. One 4-pin ATX 12V CPU power connector.

Cooling: One 4-pin CPU fan header and one 3-pin system fan header.

Front Panel: Standard headers for power button, reset, and LED indicators. 3. Rear I/O Ports

Video: 1 x HDMI and 1 x VGA (supports integrated Intel HD Graphics). USB: Two USB 2.0 ports and two USB 3.0 ports.

Networking: One RJ-45 Ethernet port (Realtek RTL8111G Gigabit). ipm17-002 motherboard manual

Audio: Three 3.5mm jacks (Line-in, Line-out, Microphone) powered by the Realtek ALC3863-CG codec. 4. Jumpers & Configuration

The board features a Clear CMOS (CLR_CMOS) jumper. To reset BIOS settings: Turn off the PC and unplug the power cord.

Move the jumper cap from pins 1-2 (default) to pins 2-3 for 5–10 seconds. Return the cap to pins 1-2 and restart the system. 5. Common Compatible CPUs

The motherboard is optimized for 65W TDP processors. Common compatible chips include: Intel Core i7-6700 / i7-6700T Intel Core i5-6400 / i5-6400T Intel Core i3-6100 / i3-6100T

The IPM17-002 (also known as the Odense2-K or Thimphu-K) is an HP proprietary motherboard commonly found in Omen and Envy desktop PCs. HP does not release a standalone PDF manual for these boards, but the critical technical details are below. 🔧 Front Panel Header Pinout

If you are moving this board to a new case, use this pinout for the 10-pin F_PANEL header (the one with the missing pin at position 10). Pin 1: HDD LED + Pin 2: HDD LED - Pin 3: Power LED + Pin 4: Power LED - Pin 5: Power Button Pin 6: Power Button Ground (GND) Pin 7: Reset Switch (Note: Some HP versions omit this) Pin 8: Reset Ground (GND) Pin 9: Reserved / No Connection Pin 10: Empty (Key pin) ⚡ Key Specifications Form Factor: Micro-ATX (mATX) Socket: LGA 1151 Chipset: Intel H170 (Odense2-K) or Z170 (Thimphu-K) CPU Support: Intel 7th Gen "Kaby Lake" (e.g., Core i7-7700, i5-7400) Intel 6th Gen "Skylake" (e.g., i7-6700, i5-6400) TDP support up to 91W Memory: 2 or 4 DDR4 UDIMM slots (varies by revision) Supports DDR4-2133 or 2400 The (also known as the ) is an

Capacity: Up to 32GB (officially tested) or 64GB (unbuffered) 🔌 Internal Connectors Storage: 5x SATA 3.0 ports Expansion: 1x PCIe x16 (Gen 3.0), 1x PCIe x1 M.2 Slots: 1x M.2 socket 3, key M (for SSDs) 1x M.2 socket 1, key E (for Wi-Fi/Bluetooth cards) Power: Standard 24-pin ATX and 4-pin CPU power

💡 Pro-Tip: If you need to clear your BIOS password or CMOS settings, look for the CLR_CMOS or PSWD jumpers near the battery. Move the jumper cap to the "Clear" position for 10 seconds while the power is unplugged. If you'd like, let me know: The exact PC model it came from (e.g., Omen 870-224) If you are trying to upgrade the CPU If you need help mapping the USB 3.0 header I can verify compatibility for specific hardware upgrades!

Why You Desperately Need the Manual

Without the manual, this board is a puzzle. Here’s why the PDF is essential:

1. Front Panel Header Hell – The IPM17-002 does not use standard Intel front-panel pinouts. Trying to guess which two pins are for the power switch could short your system.
2. Fan Connector Secrets – Many OEM boards use 5-pin or proprietary fan headers that won’t run standard 3-pin or 4-pin fans at full speed. The manual contains the pinout to rewire adapters.
3. BIOS Jumper Locations – Forgot your BIOS password? The "CLR_CMOS" jumper is often unlabeled and hidden near the SATA ports. The manual provides the map.
4. RAM Compatibility – This board typically supports DDR3L (low voltage – 1.35V), not standard DDR3 (1.5V). The manual explicitly warns against using the wrong voltage.

1. What is the IPM17-002 Motherboard?

The IPM17-002 is not a retail motherboard you’d buy off a shelf. Instead, it’s an OEM (Original Equipment Manufacturer) board, typically used in budget or mid-range desktops from the early to mid-2010s. Key specifications often include:

• Form Factor: Micro-ATX (though sometimes with non-standard mounting holes or power connectors).
• CPU Socket: Likely LGA 1155 or LGA 1150, supporting Intel’s 2nd, 3rd, or 4th generation Core processors (e.g., i3, i5, i7).
• Chipset: Intel H61, B75, or similar (entry-level to mainstream).
• RAM Support: 2 or 4 DDR3 DIMM slots, typically supporting up to 16GB or 32GB.
• Expansion Slots: One PCIe x16 for a graphics card, plus one or two PCIe x1 slots.
• Storage: SATA 2.0 or 3.0 ports (usually 4), sometimes with a legacy IDE port.

Because it’s proprietary, the board may have non-standard front-panel header pinouts, a unique BIOS, or even a custom power supply connector — making the manual absolutely critical.

Safety & handling

• Work on a non-conductive surface.
• Disconnect power before installing components.
• Avoid touching gold contacts and chips.
• Use appropriate cooling; do not block ventilation.

3. Where to Find the Official Manual

Since HP and Compaq don’t prominently host old motherboard manuals individually, use these strategies: Front Panel Header Hell – The IPM17-002 does

• HP Support Website: Search by the desktop model number (e.g., HP Pavilion p7-xxxx or Compaq Presario CQxxxx) instead of “IPM17-002.” The motherboard manual is often bundled within the full “Maintenance and Service Guide.”
• Third-Party Manual Repositories: Sites like ManualsLib, ManualsOnline, or even Archive.org may have user-uploaded copies. Search “IPM17-002 user manual” or “HP IPM17-002 manual.”
• Tech Forums (Reddit, Tom’s Hardware, Badcaps.net): Enthusiasts often share direct links or scans of OEM manuals. Search the forum for “IPM17-002 pinout” or “IPM17-002 front panel header.”
• Driver Identification Tools: Programs like Speccy or HWiNFO can identify the original pre-built model, which you can then use to find the correct manual on the manufacturer’s site.

Deep Dive: BIOS Settings Explained (From the Manual)

The manual dedicates roughly 15 pages to the BIOS (Basic Input Output System). Here is the annotated breakdown of the most critical sections users miss.

What is the IPM17-002 Motherboard?

Before diving into the manual, it is important to understand what you have. The IPM17-002 is typically an Intel-based motherboard that supports 6th and 7th generation Core processors (Skylake and Kaby Lake). It usually features an LGA 1151 socket.

Because OEMs often rebrand boards or use slightly different variations, the model number "IPM17-002" is often printed directly on the PCB (Printed Circuit Board), but the system BIOS might identify it differently (e.g., as an HP or Compaq specific model).

Problem 2: "Board Beeps 3 Times then Reboots"

• Manual Interpretation: This is not a RAM error. On the nForce 430 chipset, three long beeps indicate a Power Good signal failure.
• Solution: The manual instructs you to test the PSU. This motherboard requires a standard 24-pin ATX and a 4-pin 12V CPU connector. If the 4-pin is loose, you get this beep.

What is the IPM17-002?

First, a crucial reality check: The IPM17-002 is not a retail motherboard. You cannot buy it on Newegg or Amazon.

It is a proprietary board manufactured by Pegatron (a spin-off of ASUS) exclusively for HP (Hewlett-Packard). You will typically find this board inside:

• HP Pavilion All-in-One (AIO) PCs (e.g., 20/22-b000 series)
• Compaq Presario All-in-One models
• Select HP Slimline desktops from the 2015–2017 era

The “IPM” stands for Industrial PC Mainboard, a naming convention HP uses for its custom Pegatron orders.