We apologize your item could not be found. Not all items are listed on our website. Please contact your account manager for details regarding your searched item.
Material number (eg: xxxxxxxxxxx) no space or hyphen needed.
No Results Found
Troubleshooting the "iProg Programmer Not Connected" Error The "Programmer Not Connected" error in iProg+ software typically stems from driver misconfiguration, hardware power issues, or operating system incompatibility. Use the following guide to identify and resolve these connectivity issues. 1. Identify Connection Status
The iProg+ software and device use indicators to signal the connection state: No Power/Damaged:
The programmer is not receiving power or is hardware-damaged. Driver Missing:
The programmer is powered and working, but the driver is not correctly installed. Connected:
The programmer is working, and the driver is installed correctly. 2. Basic Hardware Checks
Before attempting software fixes, ensure the physical setup is correct: USB Port Power: Only connect the iProg+ to a standard 5V USB port on your computer. Avoid 12V External Power:
connect an external 12V power supply to the main iProg+ unit. This can permanently burn out the internal circuits.
Verify the USB cable is secure. If the software still fails to detect it, try a different USB port or a different cable to rule out a faulty connection. 3. Driver and Port Configuration
Most connectivity issues occur because the computer fails to assign the device to the correct COM port. Manual Driver Installation: If the device appears as an "Unknown Device" in Device Manager
, right-click it and select "Update Driver." Point the installation wizard to the folder within your iProg software directory. COM Port Setting: Device Manager Ports (COM & LPT)
. The device should be listed as "iProg universal programmer." For optimal compatibility with many scripts, ensure it is set to Driver Reinstallation:
If errors persist, uninstall the existing driver from Device Manager, unplug the device, restart your PC, and perform a fresh installation. 4. Software and OS Compatibility
The iProg+ software is primarily designed for older environments. Recommended OS: Windows 7 (32-bit) for the best stability. Incompatibility with Windows 10/11:
While some versions (like V89) may work on Windows 10, they are often unstable and may fail to recognize the hardware. Software Version:
If using V89 (a testing version) results in errors, it is recommended to revert to the more stable V87 software 5. Advanced Hardware Repair (Clones) iprog programmer not connected new
If the software detects the unit but specific adapters (like RFID or UART) fail, the issue may be internal to the programmer's mainboard: USB driver Installation Guide (Win 8 / 8.1 / 10) - DediProg
The primary software cause for the "Not Connected" error involves Windows Driver Signature Enforcement.
English
Chinese
F7 → Select Disable driver signature enforcement.If the software says "(New)" specifically, the iProg might be in bootloader mode or have empty flash.
Required: A second working programmer (like a MiniPro TL866 or another iProg) to re-flash the PIC chip.
iProg_v2.21.hex (or your version) firmware file.Note: If you do not have a second programmer, contact your vendor for a pre-flashed replacement chip.
Final Note: When dealing with a new iProg, patience is key. The relationship between the software, the drivers, and the Windows operating system is delicate. Following the driver installation process manually—rather than relying on automatic Windows updates—solves 90% of "Not Connected" errors.
The "iprog programmer not connected" error is a common hurdle for new users setting up the iProg+ Universal Programmer. This error typically signifies a communication failure between the software, the device driver, and the physical hardware. 🛠️ Core Troubleshooting Steps
If you encounter the "Programmer not connected" message, follow these primary diagnostic steps:
IProg Pro V89 IPROG+ Universal Programmer Instruction Manual
The "Programmer is not connected" error with the iProg+ (iProg Pro) Go to product viewer dialog for this item.
often stems from incorrect driver installation or hardware-level faults common in clone devices. Troubleshooting the Connection Driver Status: Check your Device Manager.
Grayed Out/Red Icon: The programmer has no power supply or is physically damaged.
Yellow Icon/Unknown Device: The programmer is functional, but the drivers are not installed correctly. Green Icon: The device is working and correctly recognized.
Physical Checks: Ensure the iProg is powered off before plugging in adapters like the IR MB Adapter, as a hot-plug can sometimes lead to detection failures. The Issue: Many drivers for cloned hardware are
Software Version: Ensure you are using the correct software version for your hardware; newer Windows 11 updates have been known to cause communication errors with older iProg drivers. Common Features & Issues
Script-Based Interface: iProg functions via specific scripts (e.g., ATmega8, Atmel Autodetect). The software provides the buttons (Read/Write), but the fields are generated by the script itself.
Hardware Modding (Clone Units): If "PORT" or voltage (10V/12V) errors occur, it often requires hardware modifications to the mainboard, such as replacing pull-up resistors or current sense resistors (replacing with 0.22 Ohm).
Adapter Failures: Users frequently report that only the EEPROM adapter works while RFID and UART/BDM adapters fail. This often requires a hardware fix on the clone programmer's mainboard.
Are you using an original iProg or a clone unit, and which operating system are you currently running? Iprog Error - Not Connected | PDF - Scribd
If your iProg+ programmer shows a "Not Connected" status during a new setup, it
usually indicates a driver conflict, a power supply issue, or a hardware-software mismatch often found with clone devices Quick Hardware Diagnostics
Check the LED indicator light on your programmer to identify the problem state: LED is OFF:
The programmer has no power supply or is physically damaged. LED is BLINKING: The programmer is working, but the driver is not installed correctly LED is ON (Solid):
The programmer is working and the driver is correctly recognized. REVELTRONICS - Forum Common Fixes for New Setups Reinstall USB Drivers
: This is the most common cause. You may need to manually uninstall the current driver from the Device Manager (where it might appear as an "Other Device" or have a yellow exclamation mark) and reinstall the specific driver provided with your software. Use USB 2.0 Ports : Some iProg+ clones have compatibility issues with
(blue ports). Try connecting to a standard USB 2.0 port or using a USB hub. Check the USB Cable
: Faulty or low-quality USB cables can cause intermittent connection errors. Test with a known working high-quality cable to see if the status changes. Serial Number Mismatch
: If you are using specific scripts, the software may require the programmer to have a matching serial number. Some versions allow you to change the serial number via the software to enable compatibility with different script packs. Disable Driver Signature Enforcement power delivery issues
: On Windows 10 and 11, the OS may block the iProg driver because it isn't digitally signed (Error Code 52). You may need to restart Windows in "Disable Driver Signature Enforcement" mode to complete the installation. REVELTRONICS - Forum Software Configuration Ensure the software's iProgPro.ini
or similar configuration files are not pointing to the wrong COM port. You can check which COM port the device is assigned to in the Windows Device Manager under "Ports (COM & LPT)". for Windows 11? Programmer is not connected - REVELTRONICS - Forum
Re: "Programmer is not connected" ... Problem solved, the driver was not properly installed. REVELTRONICS - Forum Programmer is not connected (V1.9.0) - REVELTRONICS
If your new iProg+ programmer is showing a "Not Connected" error, it is almost always a result of driver installation issues or operating system incompatibility.
Follow this guide to troubleshoot and resolve the connection error. 1. Verify OS Compatibility
The iProg+ software is notoriously picky about operating systems.
Recommended OS: Windows 7 (32-bit) is considered the most stable and "guaranteed" environment for iProg+.
Windows 10/11: While newer versions like V89 are designed for Windows 10, stability is not guaranteed. Users often report the "Not Connected" error on Windows 10/11 even if drivers appear installed.
Pro Tip: If you must use Windows 10, try running the software in Compatibility Mode for Windows 7. 2. Proper Driver Installation
The device is often seen as an "Unknown Device" in Device Manager if drivers aren't manually pointed to the software folder.
Connect the iProg+ unit to a USB 2.0 port (USB 3.0 ports sometimes cause communication lag).
Open Device Manager. Look for "iProg" or "Unknown Device" under Other devices or Ports (COM & LPT).
Right-click the device and select Update Driver -> Browse my computer for drivers.
Navigate to the Drivers folder within your iProg software directory (e.g., iProg_Pro_V87\Drivers) and click OK. Restart your computer after installation. 3. Hardware Power & Connections IPROG Pro V87/V89 Universal Programmer Instruction Manual
The iPROG programmer is a widely used tool for ECU programming, odometer correction, and immobilizer work across various vehicle manufacturers. A common critical failure during initial deployment or after driver reinstallation is the software reporting a "Not Connected" status despite correct USB attachment. This paper systematically analyzes the root causes—primarily driver conflicts, power delivery issues, and firmware mismatches—and provides a validated, step-by-step resolution protocol.