The Life Probo PR70 is a medical device designed for patient care and monitoring. Below are key points regarding its installation, use, and maintenance based on a 10-page manual:

3.4 Connecting the Water Supply (PR70-H only)

1. Close the main water valve.
2. Attach the braided hose to the cold water line using the provided T-adapter.
3. Connect the opposite end to the PR70’s IN port (blue label).
4. Connect the faucet tube to the OUT port (red label).
5. Slowly reopen the water valve. Check for leaks for 5 minutes.

✅ Tip: Use PTFE tape on threads, but not on compression fittings.

6.0 Regular Maintenance (Every 30/90/180 days)

The PR70 has a self-diagnostic system, but physical checks are required.

Safety Precautions

• Handling: Handle the device with care to avoid damage.
• Patient Safety: Use the device only for its intended purpose and under the supervision of trained personnel.
• Alerts and Alarms: Familiarize yourself with the device's alert and alarm system. Respond promptly to notifications.

6.1 Daily User Actions

• Wipe the exterior with a damp microfiber cloth (no solvents).
• Empty the drip tray (if present).

Page 10 – Warranty & Disposal

Limited warranty:
2 years from date of purchase for manufacturing defects. Does not cover cuff, batteries, or damage from misuse.

To claim: Provide proof of purchase, return PR70 in original packaging.

Disposal (EU WEEE / US local laws):
Do not dispose in unsorted municipal waste. The PR70 contains electronic components. Return to collection point for e-waste. Internal battery must be removed before disposal:

1. Remove 4 rear screws.
2. Disconnect battery connector.
3. Tape battery terminals.
4. Dispose at battery recycling location.

Disclaimer:
Not a substitute for professional medical advice. Always consult a physician.

Manual revision:
This document replaces all previous versions. Download latest PDF from www.lifeprobo.com/manuals.

END OF MANUAL (10 pages)