Getting the Logitech Driving Force GT to work on Windows 11 can be tricky since the wheel is technically a legacy device. However, you can still achieve full force feedback and 900-degree rotation by using the specific older version of the Logitech software.
The Driving Force GT remains a legendary budget racing wheel. Even years after its release, its gear-driven force feedback and dedicated sequential shifter make it a favorite for SimRacing beginners and Euro Truck Simulator 2 fans. Because Windows 11 doesn't automatically pull the correct legacy drivers, you have to take a manual approach to get it recognized. The Correct Driver for Windows 11
The most common mistake is downloading "Logitech G HUB" or the modern "Logitech Gaming Software." Neither of these programs will detect the Driving Force GT. Instead, you need the Logitech Gaming Software (LGS) version 5.10. Software Name: Logitech Gaming Software 5.10 Architecture: 64-bit (Required for Windows 11)
Function: Enables Profiler, FFB settings, and 900° rotation How to Install Driving Force GT Drivers on Windows 11 Disconnect your wheel from the PC.
Download the Logitech Gaming Software 5.10 (64-bit) from the official Logitech Support "Downloads" page. Ensure you select the 64-bit version, as the 32-bit installer will fail on Windows 11.
Run the installer in Compatibility Mode. Right-click the .exe file, select Properties > Compatibility, and check "Run this program in compatibility mode for Windows 7."
Follow the on-screen prompts. Plug the wheel into a USB 2.0 port when the installer asks you to connect the device. USB 3.0/3.1 ports can sometimes cause detection issues with older controllers.
Restart your computer. This step is vital for the driver to register with the Windows 11 kernel. Calibration and Profiler Settings
Once installed, open the "Logitech Profiler" app. This is where you unlock the wheel's full potential:
Degrees of Rotation: Set this to 900° for realistic driving, or 240°–360° for arcade-style titles. logitech driving force gt drivers windows 11
Enable Centering Spring: Many sim racers prefer to uncheck this to allow the game’s physics engine to handle the wheel's return-to-center feel.
Force Feedback Strength: Set "Overall Effects Strength" to 100%. If you feel a "deadzone" in the center, you can increase the "Minimum Force" settings within specific games like Assetto Corsa or iRacing. Troubleshooting Common Windows 11 Issues
If your wheel is spinning during boot-up but isn't working in-game, check these common fixes:
The "Generic USB" Problem: Open Device Manager. If the wheel shows up as a "HID-compliant game controller," right-click it, select "Update Driver," then "Browse my computer," and choose "Let me pick from a list." Select "Logitech Driving Force GT (USB)" from the list.
Power Supply: Ensure the AC adapter is plugged into a wall outlet. The USB cable powers the buttons, but the wall plug powers the Force Feedback motor.
Steam Settings: If playing on Steam, go to Settings > Controller > General Controller Settings and ensure "Generic Gamepad Configuration Support" is unchecked, as it can sometimes override the Logitech driver.
By using the legacy 5.10 software and the correct USB ports, your Driving Force GT will perform flawlessly on Windows 11, providing a high-quality racing experience without the price tag of a modern direct-drive system. To help you get the best performance out of your wheel: Which racing games or simulators are you planning to play?
Are you currently seeing any specific error messages or "Unknown Device" warnings?
Logitech Driving Force GT (DFGT) is not officially supported by Logitech for Windows 11 Getting the Logitech Driving Force GT to work
. However, it can still be used effectively by installing legacy drivers and adjusting specific security settings within the operating system. Core Compatibility Requirements
Because the DFGT is an older device, modern Logitech software like will not recognize it. You must use legacy software: Software Needed Logitech Gaming Software (LGS) version 5.10.127 Security Conflict : The 5.10 drivers are incompatible with Windows 11's Memory Integrity
(HVCI) feature. This security feature must be disabled for the driver to load properly. Installation Procedure Logitech Driving Force GT not functioning properly 1 Oct 2014 —
Getting your classic Logitech Driving Force GT (DFGT) to work on Windows 11 requires a few workarounds, as Logitech no longer provides official drivers for this specific OS. While the hardware is detected as a basic USB device, it remains unusable for racing until the legacy Logitech Gaming Software (LGS) 5.10 is installed. 1. Download the Correct Legacy Driver
The Driving Force GT is not supported by modern software like Logitech G HUB. You must use the legacy Logitech Gaming Software version 5.10.127. Official Source: Visit the Logitech Support page.
Version Selection: If Windows 11 is not listed, manually select Windows 10 (64-bit or 32-bit depending on your system) to reveal the download link for version 5.10.127. 2. Crucial Step: Disable Memory Integrity
The biggest hurdle on Windows 11 is a security feature called Memory Integrity (HVCI). This feature blocks the old Logitech drivers because they are not digitally signed to modern standards. Open the Start Menu and type Windows Security. Go to Device Security > Core isolation details. Toggle Memory integrity to Off.
Restart your PC. Without this step, the driver will likely cause a Blue Screen of Death (BSOD) or fail to detect the wheel. 3. Installation Workaround (If the Installer Fails)
Some users report that the installer finishes but doesn't actually install anything. This is often due to a conflict with Visual C++ redistributables. Logitech Driving Force GT: Driver Setup for Windows
Compatibility Mode: Right-click the installer, go to Properties > Compatibility, and select Run this program in compatibility mode for Windows 7.
Manual Extraction: If it still fails, use a tool like 7-Zip to unzip the installer file. Navigate to the $_32_ or $_64_ folder and manually run the internal .msi or .exe files. 4. Configuration and Calibration
Once installed, the Logitech Profiler should appear in your system tray.
The Logitech Driving Force GT is a legacy racing wheel (originally released for the PS3/PC). Microsoft Windows 11 does not automatically provide full force feedback functionality through its native drivers. To get the wheel working correctly (force feedback, 900-degree rotation, pedal response), you need to use a specific version of Logitech’s legacy software.
Important Note: Logitech’s modern G HUB software does not support the Driving Force GT. You must use the older Logitech Gaming Software (LGS) .
This paper reviews compatibility issues, available drivers, installation methods, and troubleshooting steps for using the Logitech Driving Force GT (DFGT) steering wheel on Windows 11. It summarizes official support, community solutions, and practical recommendations for ensuring wheel functionality (force feedback, pedal input, wheel rotation).
lgs*.exe).To restore the DFGT to its intended spec on Windows 11, the user must bypass the modern G Hub ecosystem and utilize the last stable legacy software.
The Procedure:
.inf file from the LGS program files.This process effectively bridges the gap, allowing a 2008 software stack to communicate with a 2021 operating system kernel.
| Game | Force Feedback | 900° Rotation | Buttons | Notes | |------|---------------|---------------|---------|-------| | Assetto Corsa | ✅ Full | ✅ | ✅ | Perfect | | iRacing | ✅ Full | ✅ | ✅ | Needs manual wheel calibration | | rFactor 2 | ✅ Full | ✅ | ✅ | Works natively | | RaceRoom | ✅ Full | ✅ | ✅ | Recognizes as DFGT | | F1 23 | ⚠️ Partial | ✅ | ✅ | FFB weak; requires FFB mod | | Forza Horizon 5 | ❌ No FFB | ✅ | ✅ | Use LGS to force 900° | | Euro Truck Sim 2 | ✅ | ✅ | ✅ | Excellent |
LGS_5.10.127_x64_Logitech.exe and select Properties.If force feedback feels weak or "grindy":