Martin Lightjockey Fixture Profiles _top_ Full

The full text regarding Martin Lightjockey Fixture Profiles covers the definitions, locations, library creation, and management of these essential files within the lighting controller software.

2. How to Find Existing Profiles

Martin LightJockey shipped with hundreds of pre-made fixture profiles. If you need a profile for a specific light:

• Check the original LightJockey installation folder – Subfolders are often organized by brand (Martin, Coemar, Robe, ADJ, Chauvet, etc.).
• Martin’s legacy support page (archived) – Martin Professional (now Harman) removed most LightJockey downloads, but you can find archives via Wayback Machine or third-party lighting forums like BlueRoom, Lighting Nerds, or ControlBooth.
• Generate a list of installed profiles – In LightJockey, go to Options → Fixture Manager to see all available profiles.

Note: Martin no longer officially supports LightJockey, so new fixture profiles (for modern lights) are almost never released. martin lightjockey fixture profiles full

Path C: Emulation

Run LightJockey on Windows 10 via compatibility mode (Windows XP SP3). Keep your Fixture folder on a cloud drive (Dropbox) so you never lose it again.

6.1 Curve Definitions

LightJockey supports non-linear DMX curves for natural control: The full text regarding Martin Lightjockey Fixture Profiles

• Linear: Direct mapping (0-255).
• Square: Gradual start, rapid end (for dimmer simulating incandescent).
• S-Curve: Smooth start and end (for pan/tilt).
• Custom: Not natively supported but approximated with multiple parameter segments.

Step-by-Step: Creating a Full Profile

Step 1: Obtain the Manufacturer’s DMX Chart You need the exact "DMX Traits" or "Channel Function" table for your fixture. For example, if you have a generic 7-channel LED par:

• Ch1: Dimmer (0-255)
• Ch2: Red (0-255)
• Ch3: Green (0-255)
• Ch4: Blue (0-255)
• Ch5: Strobe (0=off, 1-127=speed, 128-255=random)
• Ch6: Preset Colors (0-255)
• Ch7: Dimmer Curve (0-255)

Step 2: Open Fixture Builder Click Options > LightJockey Fixture Builder. Select New Fixture. define the trigger range (e.g.

Step 3: Define Basic Properties

• Fixture Name: e.g., "Generic 7ch LED PAR (Full)"
• Manufacturer: User Defined
• DMX Footprint: 7 channels
• Mode: Single mode (or multi-mode if your fixture supports 7/9/12ch).

Step 4: Populate the DMX Slots (The "Full" Part) Scroll down the attribute list. For a full profile, do not use "Generic Dimmer" for everything. Assign specific types:

• Dimmer (Channel 1): Select "Intensity" from the dropdown. Enable 16-bit if available (not common on LEDs).
• Color (Ch2-4): Select "Color Mix RGB" and map the channels. Check "Invert" if your fixture is 0=off (unlikely).
• Strobe (Ch5): Select "Shutter/Strobe." Under properties, define the trigger range (e.g., Speed 1-127 = linear strobe).
• Macros (Ch6): Select "Preset." Define the 8-16 preset slots (e.g., 0-31 = Open, 32-63 = Color 1, etc.).
• Curve (Ch7): Select "Control." Label the values (0-31 = Linear, 32-63 = Square, etc.).

Step 5: Save and Test Save the file as Generic_7ch_Full.f03. Move it to the Fixture folder. Patch a dummy fixture in LightJockey and manually slide each channel to verify functionality.

Why this is superior to "Partial" profiles: Building the profile correctly allows you to use LightJockey’s Color Picker (instead of three faders) and Effect Generator (auto pan/tilt/gobo chase).