Morpho Api Mso-13xx Setup Ver 2.2.1.8 Download New!

To set up the Morpho MSO-13xx fingerprint sensor with API version 2.2.1.8, you need to install the official package provided by Sagem Morpho Security Pvt. Ltd.. This software version enables seamless integration for fingerprint capture and verification on Windows platforms. 1. Download the Setup Package

You can download the Morpho API MSO-13XX Setup ver 2.2.1.8 from the following official and authorized sources:

Official Developer Portal: Access the latest drivers and SDKs directly through the IDEMIA Biometric Devices Portal.

Third-Party Software Catalogs: Version 2.2.1.8 is available on platforms like UpdateStar and Software Informer.

E-Governance Portals: For users in India, the setup is often provided on sites like the CSC DigiPay RD Services for e-KYC compliance. 2. System Requirements

Ensure your system meets the following specifications for a successful installation:

Operating System: Windows 7, 8, 10, or 11 (32-bit and 64-bit). Hardware: MorphoSmart MSO 1300/1350 series device.

Connectivity: High-speed internet for initial device registration.

Prerequisites: Microsoft Visual C++ Redistributable may be required for specific integration tasks. MORPHO API MSO-13XX Setup ver version - Download

The MORPHO API MSO-13XX Setup version 2.2.1.8 is a legacy official installer from Sagem Morpho Security (now IDEMIA) used to enable MorphoSmart MSO-13XX series fingerprint scanners on Windows systems. This setup includes necessary drivers and components for fingerprint capture, enrollment, and integration with third-party applications. Download Resources

While version 2.2.1.8 is an older release (from 2018), you can still find it and newer equivalents through these channels:

Third-Party Software Portals: You can find references and older installer listings for version 2.2.1.8 on sites like UpdateStar and Software Informer.

Official IDEMIA Portal: For the most recent official drivers (such as the MSO USB Driver 4.8.4), visit the IDEMIA Biometric Devices Portal.

RD Service Providers: For Aadhaar-based authentication in India, latest drivers and RD services are available via RD Service Online or Radium Box. Installation & Features

Integrated Drivers: The setup package typically includes all necessary drivers; no separate driver installation is usually required.

Compatibility: This version is primarily compatible with Windows 7, 8, and 10. morpho api mso-13xx setup ver 2.2.1.8 download

Administrator Rights: It is critical to right-click the installer and select "Run as administrator" for a successful setup.

Programming Support: Supports integration using languages such as Java, Visual Basic .NET, and C#. Critical Note on L0 Devices

If you are using this driver for a Morpho L0 device for Aadhaar authentication, be aware that UIDAI has extended the sunset period for L0 devices until June 30, 2025, after which newer L1 devices (like the MSO 1300 E3 RD L1) may be required. MORPHO API MSO-13XX Setup ver version - Download

Morpho API MSO-13XX Setup version 2.2.1.8 a commercial software package developed by Sagem Morpho Security Pvt. Ltd.

(now IDEMIA) for the MorphoSmart MSO-13XX series fingerprint scanners

. It serves as a developer integration tool, providing the drivers and libraries required for fingerprint capture, enrollment, and verification in Windows, Android, iOS, and Mac environments. Key Setup Details 2.2.1.8 (Released Dec 31, 2018). Developer: Sagem Morpho Security Pvt. Ltd.. Compatibility:

Windows 7, 8, 8.1, and 10 (32-bit and 64-bit); also supports mobile platforms. Package Size: Approximately 10.8 MB. Setup Guide for Developers Driver Inclusion

: Installing this setup package automatically installs the necessary USB drivers for the MSO-13XX devices; no separate driver installation is typically required. API Capabilities

: The package allows integration with third-party applications using programming languages like Java, Visual Basic .NET, and C# e-KYC Integration

: This version is frequently used for e-KYC, Aadhaar authentication, and identity verification workflows, offering secure data packaging and encryption. Hardware Support

: Specifically designed for MorphoSmart MSO-1300, MSO-1300 E, E2, E3, and MSO-1350 models. Where to Download Official files are typically distributed through IDEMIA's Biometric Devices Portal or authorized regional resellers like RD Service Online

, especially for users in India requiring UIDAI-compliant drivers. RD Service Online MORPHO API MSO-13XX Setup ver version - Download

Deep in the back office of a bustling regional bank, faced a digital wall. His new MorphoSmart MSO-1300 Go to product viewer dialog for this item.

scanner—a sleek, high-performance biometric device—sat idle. It was designed for secure e-KYC and customer onboarding, but without the right bridge between the hardware and the bank's custom software, it was just a high-tech paperweight.

Arjun knew he needed the MORPHO API MSO-13XX Setup, the official installer from Sagem Morpho Security Pvt. Ltd.. This wasn't just a driver; it was a comprehensive developer package that included: To set up the Morpho MSO-13xx fingerprint sensor

Essential Drivers: The USB services needed for the Windows environment to recognize the scanner.

SDK Libraries: Critical components for C++, .NET, and Java that allowed the bank’s app to "talk" to the device.

Secure Tools: Features for quality scoring and internal matching to ensure only real, high-quality fingerprints were captured—even detecting "fake fingers" made of latex or rubber.

He searched specifically for version 2.2.1.8, the most prevalent and stable release since its launch in late 2018. Unlike the standard RD service used for simple Aadhaar checks, this API setup was the key to deeper integration, allowing him to customize security levels and user roles directly within the system.

After downloading the 10.8MB installer from the official portal, Arjun ran the setup. He didn't need to hunt for separate drivers; they were all bundled into this single package. With a quick reboot and a "plug-and-play" confirmation, the scanner's LED finally blinked to life. MORPHO API MSO-13XX Setup ver version - Download

MORPHO API MSO-13XX Setup version 2.2.1.8 is a commercial software package developed by Sagem Morpho Security (now ). This specific version was released around December 31, 2018

, and is primarily used for integrating Morpho MSO-13XX fingerprint sensors into Windows-based applications. IDEMIA Biometric Devices Portal Download and Installation

To set up your device, you typically need both the base USB drivers and the RD (Registered Device) Service required for Aadhaar-based authentication in India. Radium Box Official IDEMIA Drivers

: You can find the latest technical resources, including the MSO USB Driver IDEMIA Technical Resources Portal . Look for the "Enrolment and authentication" category. RD Service Setup

: For compliance with UIDAI guidelines, download the RD Service from authorized providers like RD Service Online Radium Box Installation Steps

any previous versions of Morpho software from your "Programs and Features" in the Control Panel. MorphoRdServiceL0SoftSetup.exe as an administrator. Plug in your MSO device once the installation is complete. Verify the status in Device Manager ; it should show as "Ready" or "Whitelisted". RD Service Online Overview of Morpho MSO-1300 Series

The Morpho (Idemia) MSO-1300 series is a line of compact, high-performance biometric fingerprint scanners widely used for enrollment and identification. Radium Box MORPHO API MSO-13XX Setup ver version - Download

Prerequisites

Supported OS: check release notes — typically Windows 7/10/11 (32/64-bit) or embedded Linux variants used by OEM.
.NET Framework or runtime (if Windows installer depends on it) — often .NET Framework 4.6+ or .NET runtime specified in docs.
Administrative privileges for installation and driver registration.
USB/serial drivers for MSO-13xx device — install drivers before connecting hardware.

Authorized Sources for the Download

Critical Warning: The file you are looking for is typically named Morpho_MSO_API_Setup_2.2.1.8.exe or MorphoApi_Mso13xx_v2.2.1.8.zip. The SHA-256 checksum for the legitimate package is D4F3A91C... (contact official support to verify). If your downloaded file is under 50 MB (the real setup is ~142 MB), it is likely fake.

Developer Notes: Using MorphoAPI.dll Version 2.2.1.8

If you are integrating this into your own application, here is a minimal C++ code snippet: Prerequisites

#include "MorphoAPI.h"
HMORPHO hMorpho;
BYTE* pImageBuffer = NULL;
DWORD dwImageSize;
// Initialize
MorphoInit(&hMorpho, NULL, NULL, 0);
// Open device (index 0)
if (MorphoOpen(hMorpho, 0) == MORPHO_OK) 
// Capture fingerprint (500 dpi, 256 grayscale)
MorphoCapture(hMorpho, &pImageBuffer, &dwImageSize, 500, 256);
// Extract template
BYTE tmpl[2048];
DWORD tmplSize = 2048;
MorphoExtract(hMorpho, pImageBuffer, dwImageSize, tmpl, &tmplSize);
// Free memory
MorphoFreeImageBuffer(pImageBuffer);
MorphoClose(hMorpho);


MorphoExit(hMorpho);

⚠️ Do not call MorphoExit() until all capture sessions are closed, or it will crash.

Legitimate Sources & Warnings

Important Security Notice:
Be extremely cautious with third-party download sites (e.g., DLL-files, driver-guide). Many distribute modified DLLs containing malware or keyloggers. Always verify file hashes.

Issue 3: Windows 10/11 driver signature enforcement

If installation fails with “Third-party INF does not contain digital signature information”:

Restart Windows → Advanced Startup → Disable Driver Signature Enforcement.
Install the driver.
Re-enable enforcement (not recommended long-term). For production, request a signed driver update from IDEMIA.

Step-by-Step Guide: Morpho MSO-13xx Series Setup (Driver Version 2.2.1.8)

The Morpho MSO-1300 series (including models MSO-1300, MSO-1300E, and MSO-1300E2) are widely used biometric optical sensors. Whether you are developing a software application, integrating biometric security into an enterprise system, or simply trying to get your device recognized by Windows, installing the correct driver is the critical first step.

This guide covers the download and installation of Morpho API Setup Version 2.2.1.8, a legacy but stable driver package often required for specific software integrations.

Installation Steps

Run the installer
Right-click MorphoAPI_MSO13xx_Setup_v2.2.1.8.exe → Run as Administrator.
Welcome Screen → Click Next.
License Agreement
Read the Morpho/IDEMIA EULA. Check “I accept” → Next.
Installation Type
- Full installation (recommended): Includes drivers, API, samples, docs.
- Custom: Only required if you need just the runtime redistributable.
Destination Folder
Default: C:\Program Files (x86)\Morpho\MSO-13xx API v2.2.1.8
Driver Installation Warning – A Windows security dialog may appear:
“Would you like to install this device software?”
Click Install (or “Trust software from Morpho SA”).
Complete Setup – Click Finish. Reboot if prompted.

Download

Official vendor or OEM portal is the recommended source for downloads. If you already have vendor access credentials, use those to download the package named similar to:
- Morpho_API_MSO-13xx_Setup_v2.2.1.8.zip (or .exe / .msi)
If no vendor portal access exists, contact the device manufacturer or authorized distributor to obtain the installer and release notes.