Msi N1996 Motherboard Specifications -

To put together a guide for an MSI N1996 motherboard, the most important fact to understand is that "N1996" is not a model number. It is an ACA supplier code for Australian regulatory compliance. Because this label appears on dozens of different MSI boards released over two decades, there is no single "N1996" specification. 1. How to Identify Your Actual Model

To find the real specifications, you must locate the actual model number printed on the board, typically between the expansion slots or near the RAM.

Look for "MS-XXXX": This is MSI's internal model designation (e.g., MS-7529 or MS-7181). Marketing Name: You may also see names like or .

Version Number: Note the version (e.g., VER:1.0) as specs can change between revisions. 2. Common "N1996" Variants & Specs

Depending on which era your board is from, here are the likely specifications for the most common models carrying this label: MSI N1996 Motherboard Overview and Specs | PDF - Scribd

MSI N1996 Motherboard Specifications

The MSI N1996 motherboard is a high-performance, Socket 478-based motherboard designed for Intel Pentium 4 and Celeron D processors. Released in the mid-2000s, this motherboard supports various features that cater to the needs of both home users and enthusiasts. msi n1996 motherboard specifications

Key Features and Specifications:

Socket: 478
Supported Processors: Intel Pentium 4 (up to 3.6 GHz), Intel Celeron D (up to 3.46 GHz)
Chipset: NVIDIA nForce4 Ultra
Memory:
- Type: DDR RAM
- Number of Slots: 4
- Maximum Capacity: 4 GB (Dual Channel)
- Supported Speeds: 400 MHz, 333 MHz
Expansion Slots:
- 1 x AGP 8x (up to 4 GB/s)
- 5 x PCI (32-bit, 33 MHz)
Storage:
- 1 x Ultra ATA/133 (supporting up to 2 hard drives)
- 4 x SATA/150 (supporting up to 4 hard drives or SSDs)
Audio and Video:
- Integrated 7.1-channel audio (using Realtek ALC850 codec)
- Integrated graphics (using NVIDIA onboard graphics)
Networking:
- 1 x Gigabit LAN (using Marvell 88E8001 controller)
Rear Panel Connectors:
- 1 x PS/2 keyboard
- 1 x PS/2 mouse
- 1 x LPT
- 1 x COM
- 4 x USB 2.0
- 1 x RJ-45 (LAN)
- Audio jacks (Line-in, Line-out, Mic-in)

Additional Features:

Supports MSI's proprietary features, such as Core Center (for system monitoring and tweaking), Fuzzy Logic (for smart fan control), and DOT (Dynamic Overclocking Technology)
Provides a high-quality, high-performance platform for gaming and multimedia applications
Supports ACPI (Advanced Configuration and Power Interface) for improved power management

Technical Details:

Form Factor: ATX (305mm x 244mm)
Power Supply: ATX (24-pin)
Bios: AMI BIOS (with MSI's proprietary features and tweaks)

The MSI N1996 motherboard offers a robust feature set and reliable performance for its time. While it may not support modern processor families or the latest interfaces, it still provides a good foundation for users looking to build or upgrade a system around older Intel CPUs. Keep in mind that the information provided here may not reflect the current market situation or availability, and users should verify compatibility and support with the manufacturer or vendors before making any purchasing decisions.

It is important to note that "N1996" is not a motherboard model number

. It is actually an ACA (Australian Communications Authority) supplier code indicating that the product can be legally sold in Australia. Because this mark appears on many different MSI motherboards, graphics cards, and optical drives, there is no single set of "N1996 specifications". To put together a guide for an MSI

To find your specific motherboard's specifications, you should look for the actual model number printed on the board itself, usually near the RAM slots or between the expansion slots (e.g., MS-XXXX VER:X.X

Below are specifications for some common legacy MSI motherboards that often carry the N1996 mark: Common "N1996" Marked Board: MS-7641 (860GM-P43)

This is a popular AM3+ board often identified by users as "N1996". Socket Type : AMD Socket AM3+ : AMD 760G / SB710 : 2x DDR3 DIMM slots, supporting up to 16GB (1066/1333 MHz) Expansion Slots : 1x PCIe 2.0 x16, 1x PCIe x1, 1x PCI slot : 4x SATA 3Gb/s ports

: 6x USB 2.0, 1x VGA, 1x DVI-D, LAN (RJ-45), and PS/2 Keyboard Legacy Board: MS-6382 (Socket 478)

A much older Pentium-era board frequently found in OEM systems. Socket Type : mPGA478 (Socket 478) for Intel Pentium 4 / Celeron : Intel 845E : 2x DDR1 slots (Max 1GB capacity) Expansion Slots : 1x AGP 4x slot, 3x PCI slots : IDE (Ultra ATA-66/100) and Floppy drive connector How to Identify Your Specific Board If your board does not match these, use the MSI Support Center to find the correct manual by searching for the number printed on your hardware. MSI N1996 Motherboard / Video Card / ODD

You're looking for the specifications of the MSI N1996 motherboard. Unfortunately, I don't have direct access to a database of specific motherboard models, and detailed specs can vary or become outdated. However, I can guide you on where to find the information and provide some general insights. Socket: 478 Supported Processors: Intel Pentium 4 (up

Notes & caveats

Exact specs vary by board revision and regional OEM variants. The N1996 designation appears to refer to an older/legacy MSI board; precise details (chipset, exact slot counts, onboard codecs) require a model-specific datasheet or product page.
If you need a definitive pinout, BIOS version, jumper settings, or exact supported CPU list, I can fetch the official manual or product page.

Drafting a specification paper for an "MSI N1996" motherboard requires a unique approach because N1996 is not actually a model number.

It is a certification mark (ACA supplier code) for the Australian Communications and Media Authority, indicating the board can be legally sold in Australia. Because this mark appears on hundreds of different MSI boards—ranging from the early 2000s to the 2010s—the specs vary wildly depending on which specific board you have.

Below is a draft organized by the most common board types that carry this label, along with instructions on how to find your actual model. How to Find Your True Motherboard Model

Before finalizing your paper, you must identify the MS-XXXX number printed on the board. system panel connectors MSI N1996

Rear I/O Panel (Standard OEM layout)

From left to right:

PS/2 Mouse (green)
PS/2 Keyboard (purple)
VGA (D-Sub 15-pin) – Powered by the G31 integrated graphics.
Parallel Port (LPT) – For old printers or industrial hardware.
Serial Port (COM1) – 9-pin male connector.
4 x USB 2.0 (typically two stacked pairs).
1 x RJ-45 Ethernet (Realtek 8111 series, 10/100/1000 Mbps).
3 x Audio Jacks (Line-in, Line-out, Mic) – Realtek ALC888 or similar codec.

Storage Interfaces

SATA Ports: 4 x SATA II (3.0 Gb/s).
- RAID support: None (ICH7 does not support RAID natively on most OEM boards).
- Important: SATA II means no AHCI on many legacy Windows XP installs without pre-loading drivers.
IDE/PATA: 1 x IDE connector (40-pin) supporting up to 2 devices (Master/Slave). This is critical for retro builds using old optical drives or hard drives.
Floppy Drive Connector: Yes – a 34-pin FDC header (common for OEM PCs of this era).