The Nalco ULTIMER® 7752 is a water-based polymer technology used primarily in wastewater management to improve solids removal without the use of hydrocarbon solvents. Essential Safety & Handling (SDS Highlights)
As of recent safety data, the product is generally characterized as having low human hazard under normal use. Hazard Profile: Not classified as flammable or combustible.
Health Effects: No symptoms are typically known or expected for eye contact, skin contact, ingestion, or inhalation under standard conditions. First Aid Measures:
Eyes: Rinse with plenty of water; seek medical attention if symptoms occur. Skin: Wash off with soap and plenty of water.
Inhalation: Treat symptomatically; if symptoms develop, move to fresh air. Physical Properties: Appearance: White liquid. pH: 3.0 - 4.1 (100% concentration at 25°C). Boiling Point: Approximately 100°C. Flash Point: > 93.3°C. Application and Benefits
The ULTIMER technology provides several operational advantages over traditional emulsion or powder flocculants:
Sustainable Management: It eliminates the need for surfactants and hydrocarbon solvents, leading to "less hazardous sludge" in treatment plants.
Efficiency: It offers significantly faster activation—roughly 30 times faster than emulsion flocculants and 60 times faster than powder versions.
Reliability: It is specifically designed to handle highly variable wastewater, including oily wastewater. Accessing the Full SDS
Nalco Water (an Ecolab company) does not always provide full Safety Data Sheets publicly online for all regions.
Official Request: You can request the most current SDS directly from the Nalco Water SDS Request Form.
Emergency Contact: In the event of a spill or accident, use the emergency telephone numbers provided on the product label or the specific SDS issued for your region (e.g., CHEMTREC at 800-424-9300 for the US). Find the exact contact number for your specific region.
Compare this to other Nalco water-based flocculants like ULTIMER 7757.
Understand the regulatory compliance (like REACH or GHS) for your location. AI responses may include mistakes. Learn more ULTIMER® 7752 Safety Data Sheet | PDF | Toxicity - Scribd
This write-up summarizes the safety and handling profile for ULTIMER® 7752, a water-soluble polymer technology from Nalco Water (Ecolab). Product Identification Name: ULTIMER® 7752
Type: Water-soluble polymer used primarily for solids capture efficiency in wastewater treatment.
Application: Designed to replace latex flocculants, reducing overall solids and hazardous sludge. Hazard Identification & Safety Profile
Under normal use, this product is generally considered low-hazard.
Health Effects: No known or expected health injuries for eyes, skin, ingestion, or inhalation.
Chronic Exposure: No known symptoms or health injuries expected over time.
Physical Hazard: The product becomes extremely slippery when wet. Surfaces should be washed thoroughly until all traces are removed. Toxicity Data Acute Oral Toxicity: Estimated to be > 2,000 mg/kg.
Carcinogenicity: No components are listed at levels greater than or equal to 0.1% as hazardous carcinogens. Handling and Storage
Storage: Protect from frost; freezing does not impair the product if properly reconstituted. Keep containers closed when not in use.
Ventilation: Use with adequate ventilation to ensure safety. nalco ultimer 7752 msds new
Precautions: Avoid contact with eyes, skin, and clothing. Do not take internally. Emergency and First Aid
Spills: For small spills, contain with absorbent material like clay or soil. Nalco POLYCLEAN 7 is recommended for effective cleanup.
Eye/Skin Contact: Though symptoms are not expected, it is standard practice to rinse affected areas and have emergency equipment readily available.
For the most up-to-date and complete safety profile, refer to the official Ecolab/Nalco SDS search using the product name or code. ULTIMER® 7752 Safety Data Sheet | PDF | Toxicity - Scribd
Title: Understanding NALCO Ultimer 7752: A Comprehensive Review of its Safety Data Sheet (MSDS)
Introduction
NALCO Ultimer 7752 is a chemical product widely used in various industries, including water treatment, oil and gas, and industrial processes. As with any chemical substance, it's essential to understand its properties, hazards, and safe handling practices to ensure the well-being of users and the environment. In this blog post, we'll review the Safety Data Sheet (MSDS) of NALCO Ultimer 7752, providing you with a comprehensive overview of its composition, hazards, and safety precautions.
What is NALCO Ultimer 7752?
NALCO Ultimer 7752 is a high-performance, cationic polymer used as a flocculant and coagulant aid in various industrial applications. It's designed to improve the efficiency of solid-liquid separation processes, such as clarification, thickening, and dewatering.
MSDS Overview
The Safety Data Sheet (MSDS) for NALCO Ultimer 7752 provides critical information on the product's hazards, safe handling practices, and emergency procedures. Here's a summary of the key points:
Composition
NALCO Ultimer 7752 is a proprietary blend of:
Hazards
The MSDS identifies the following hazards associated with NALCO Ultimer 7752:
Safe Handling Practices
To ensure safe handling of NALCO Ultimer 7752:
Emergency Procedures
In case of an emergency:
Conclusion
NALCO Ultimer 7752 is a widely used chemical product that requires careful handling and safety precautions to minimize risks to users and the environment. By understanding its composition, hazards, and safe handling practices, you can ensure a safe and effective use of this product in your industrial applications. Always refer to the latest MSDS for the most up-to-date information on the safe handling and use of NALCO Ultimer 7752.
Recommendations
By taking these precautions and staying informed, you can minimize the risks associated with NALCO Ultimer 7752 and ensure a safe and successful use of this product in your industrial applications. The Nalco ULTIMER® 7752 is a water-based polymer
Nalco ULTIMER® 7752 is a water-based polymer technology used primarily for wastewater management and water clarification . According to the Safety Data Sheet (SDS), it is generally not classified as a hazardous substance under normal use. 1. Product Identification & Properties Product Name: ULTIMER® 7752 Physical Form: White liquid Chlorine-like Flash Point: > 93.3°C (Non-flammable/Non-combustible) 3.0 – 4.1 (at 100%, 25°C) Freezing Point: Pour point of -5°C www.farnese.co.nz 2. Safety & Handling Precautions
While not classified as hazardous, standard industrial hygiene is required: Eye & Skin Protection:
Wear safety glasses and protective clothing. Although health injuries are not expected, it is best to avoid direct contact.
Wash face and hands thoroughly after handling. Remove and wash any contaminated clothing before reuse. Slippage Hazard:
Like many polymers, this product may become extremely slippery when wet. Ensure surfaces are washed thoroughly if spilled. 3. First Aid Measures
If exposure occurs, follow these steps and seek medical advice if symptoms persist: Rinse immediately with plenty of water. Wash off with soap and plenty of water. Ingestion: Rinse mouth. Do induce vomiting unless directed by medical personnel. Inhalation:
Move to fresh air; seek medical attention if symptoms develop. 4. Firefighting & Spill Control Extinguishing Media:
Use media appropriate for the surrounding environment (e.g., dry chemical, foam, or water spray).
Stop the leak if safe. Contain with non-combustible absorbent material (sand or earth) and place in a labeled container for disposal. Do not allow the product to reach soil or waterways. Hazardous Combustion:
May release carbon, nitrogen, and sulfur oxides, or hydrogen chloride under fire conditions. 5. Storage & Disposal
Keep containers tightly closed in a dry, well-ventilated area. Protect from frost and extreme temperatures to prevent viscosity changes or pumping issues.
Dispose of fire residues and contaminated water in accordance with local and national regulations.
For the most current or site-specific version, you can request an official SDS directly through the Ecolab SDS portal in oily wastewater or specific pumping requirements for low temperatures? ULTIMER® 7752 Safety Data Sheet | PDF | Toxicity - Scribd
Introduction
Nalco Ultimer 7752 is a product offered by Nalco, an Ecolab company, which is a leading provider of water treatment and process solutions. The product is likely a specialty chemical used in various industrial applications. The Material Safety Data Sheet (MSDS) is a critical document that provides information on the safe handling, use, storage, and disposal of the product.
MSDS Overview
The MSDS for Nalco Ultimer 7752 provides detailed information on the product's composition, hazards, and safety precautions. Here are some key points:
MSDS Sections
Here is a summary of the MSDS sections:
Toxicology and Environmental Fate
The MSDS provides information on the product's toxicology and environmental fate:
Regulatory Information
The MSDS provides information on regulatory requirements and compliance: Hazards The MSDS identifies the following hazards associated
Conclusion
The MSDS for Nalco Ultimer 7752 provides critical information on the safe handling, use, storage, and disposal of the product. It is essential to follow the guidelines and recommendations outlined in the MSDS to minimize risks to human health and the environment. If you are handling or working with Nalco Ultimer 7752, ensure that you have access to the most recent MSDS and follow all applicable regulations and guidelines.
Recommendations
Limitations
This report is based on available information and is intended to provide a general overview of the MSDS for Nalco Ultimer 7752. It is essential to consult the most recent MSDS and relevant regulatory agencies for the most up-to-date information.
The safety and technical profile of Nalco ULTIMER 7752 is characterized by its low-hazard profile and use in industrial water treatment. Official Safety Data Sheets (SDS) for Nalco Water products are generally not available for direct public download and must be requested through the Ecolab SDS Request Form. Key SDS Profile: ULTIMER 7752
Based on available safety documentation, the product exhibits the following properties:
Hazard Classification: Generally considered non-hazardous under normal industrial use. Health injuries are not known or expected for eye contact, skin contact, ingestion, or inhalation. Physical Properties: Appearance: White liquid with a slight chlorine odor. pH: Acidic, ranging from 3.0 to 4.1 at 100% concentration. Boiling Point: Approximately 100∘C100 raised to the composed with power C 212∘F212 raised to the composed with power F Flash Point:
>93.3∘Cis greater than 93.3 raised to the composed with power C
>200∘Fis greater than 200 raised to the composed with power F ), typically tested via Pensky-Martens closed cup. Pour Point: -5∘Cnegative 5 raised to the composed with power C 23∘F23 raised to the composed with power F Toxicity: Acute oral toxicity is estimated at Technical Application
ULTIMER 7752 is a water-soluble polymer technology designed primarily for:
Wastewater Treatment: Used for primary and secondary effluent clarification.
Operational Efficiency: Unlike traditional latex flocculants, ULTIMER technology does not use hydrocarbon solvents or surfactants, which can reduce hazardous waste and overall disposal costs.
Ease of Use: It is designed to work without specialized polymer "make-down" equipment or long activation times. Emergency and Handling Contact
In the event of a chemical emergency or to obtain the most recent 2026 version of the SDS, use the following official Ecolab/Nalco resources: Request Form: Nalco Water SDS Request Emergency Phone: (800) 424-9300 (CHEMTREC 24-Hour)
Main Office: Nalco Water, 1601 W. Diehl Road, Naperville, IL ULTIMER™ Polymer Technology - Ecolab
Understanding the new SDS is useless without practical implementation. Here is how to translate the document into daily operations.
The new SDS provides a clearer breakdown. While the exact polymer is proprietary, the key ingredient is:
Note to the user: The new format requires specific CAS numbers for the solvent carriers, which were often omitted in older "MSDS" formats.
Using an outdated MSDS (pre-2015 or pre-GHS) is a regulatory violation under OSHA's Hazard Communication Standard (29 CFR 1910.1200) in the US, and under CLP Regulation (EC) No 1272/2008 in Europe.
Many older versions used no signal word or "Warning." The latest iterations often specify:
The chemical composition of Nalco Ultimer 7752 has not fundamentally changed. However, regulations evolve. The "new" SDS typically refers to updates aligned with: