To connect your Nokia 130 (RM-1035) Go to product viewer dialog for this item.
to a PC, you primarily need the Nokia Connectivity Cable Driver. This driver allows your computer to recognize the phone for data transfer or advanced tasks like flashing firmware. 💾 Driver Download & Links
Since official Nokia/Microsoft support pages for this model are largely archived, you can find the necessary drivers through reliable third-party repositories:
Nokia Connectivity Cable Driver (v7.1.182): Often bundled with Nokia PC Suite, this is the standard driver for Windows. Available at Software Informer or Softonic.
MTK (MediaTek) USB Drivers: Required if you are using tools like Miracle Box or Infinity Best for flashing or "Contact Service" repairs. 🛠️ Common Connection Fixes
If your PC doesn't see the phone even with drivers installed, try these steps: Use USB 2.0: The
often fails to connect properly to USB 3.0 (blue) ports. Plug it into a USB 2.0 port instead.
Insert an SD Card: Mass storage mode usually requires a microSD card to be present in the phone.
Check the Cable: Ensure you are using a data cable, not a "charge-only" cable.
Disable Driver Signature (Windows 10/11): For MTK flashing drivers, you may need to disable Driver Signature Enforcement via Advanced Startup to install them successfully.
💡 Pro Tip: If you're trying to fix a software issue like "Contact Service," you will need the specific RM-1035 Flash File in addition to the MTK drivers. If you'd like, I can help you: Find a guide for flashing the firmware
Troubleshoot Device Manager errors (like the "yellow exclamation mark") Identify the correct security code for your device Nokia 130: Cannot connect to PC with USB cable
Finding the correct Nokia 130 (RM-1035) USB driver is essential for flashing firmware, transferring data, or using the device as a modem. This guide provides a comprehensive walkthrough for downloading and installing the necessary drivers on Windows. Understanding the Nokia 130 (RM-1035) Connection
The RM-1035 is a classic dual-SIM feature phone. Unlike smartphones, it requires specific Connectivity Cable Drivers to be recognized by PC suites or flashing tools like Nokia Best (BB5 Easy Service Tool) or Miracle Box. 📥 Download Links for Nokia 130 RM-1035 Drivers nokia 130 rm1035 usb driver
To ensure a stable connection, you typically need two types of drivers: 1. Nokia Connectivity Cable Driver
This is the standard driver for Windows to recognize the phone via USB. Version: v7.1.182 (Latest) OS Support: Windows 7, 8, 10, 11 (32-bit & 64-bit) 2. MTK (MediaTek) USB VCOM Drivers
The Nokia 130 runs on a MediaTek chipset. If you are trying to "unbrick" or flash the phone, you must install these to enable the Preloader port. 🛠️ How to Install Nokia 130 USB Drivers Method 1: Automatic Installation (Recommended) Download the Nokia Connectivity Cable Driver setup file.
Right-click the installer and select "Run as Administrator." Follow the on-screen prompts and click Finish. Restart your computer to initialize the registry changes. Method 2: Manual Installation (For Flashing Tools)
If your PC sees the device as "Unknown Device" in Device Manager: Open Device Manager (Win + X > Device Manager). Connect your Nokia 130 to the PC using a micro-USB cable. Right-click the Unknown Device or MT6xx entry. Select Update Driver > Browse my computer for drivers.
Point to the folder where you extracted the MTK VCOM drivers. Click Install anyway if a Windows Security warning appears. ⚠️ Troubleshooting Connection Issues
If the RM-1035 is still not detected, try these quick fixes:
Check the Cable: Use a high-quality data sync cable; some cables are "charge-only."
USB Port: Avoid using USB hubs. Plug directly into the motherboard ports (back of the PC).
Driver Signature Enforcement: On Windows 10 and 11, you may need to disable "Driver Signature Enforcement" to install older MediaTek drivers.
Clean the Port: Feature phones often collect lint in the charging port, preventing a solid data connection. 🚀 Use Cases for the RM-1035 Driver Firmware Updating: Use with Nokia Software Recovery Tool. Flashing: Repairing "Contact Service" errors or boot loops.
Data Backup: Extracting contacts or messages via specialized software.
💡 Pro Tip: Always take a backup of your phone data before attempting to flash new firmware, as this process will wipe the device memory. If you'd like, I can help you find: The official firmware files for the RM-1035 A guide on how to remove a forgotten security code To connect your Nokia 130 (RM-1035) Go to
The latest version of flashing tools compatible with this model
To connect your Nokia 130 (RM-1035) to a PC for data transfer or firmware flashing, you generally need the Nokia Connectivity USB Driver. Since this is a legacy device (released in 2014), modern Windows versions may require manual installation or "Compatibility Mode." 1. Download the Driver
You can find the compatible drivers on community-driven archives or technical support sites, as official Nokia/Microsoft support for this model has largely ended.
Nokia Connectivity USB Driver (v7.1.182 or later): This is the standard driver package for older Nokia Series 30+ devices.
MediaTek (MTK) USB VCOM Drivers: Required if you are using tools like "Nokia Software Recovery Tool" or "MobiMB" for firmware tasks, as the RM-1035 uses a MediaTek chipset. 2. Installation Steps
Extract files: If the driver is in a .zip or .7z format, extract it to a folder on your desktop.
Run as Administrator: Right-click the setup.exe or install.exe and select Run as Administrator.
Compatibility Settings: If using Windows 10 or 11, right-click the installer, go to Properties > Compatibility, and select Windows 7 before running.
Restart PC: Always reboot after installation to ensure the driver registry entries are active. 3. Connecting the Device
Cable: Use a standard Micro-USB data cable (ensure it is a data cable, not just a charging cable).
Phone Mode: When you plug the phone into the PC, it may ask you to select a mode. Choose "Mass Storage" for transferring files to an SD card or "Modem/Data" for sync software. 4. Manual Driver Update (If Not Detected) If the PC shows an "Unknown Device" in Device Manager: Right-click the Start button and select Device Manager.
Find the item with a yellow exclamation mark (usually under "Other devices"). Right-click it and choose Update driver.
Select "Browse my computer for drivers" and point it to the folder where you extracted the Nokia drivers. Do You Really Need the Driver
Pro Tip: If you are trying to move music or photos, the simplest way is to insert a microSD card (up to 32GB) into the phone and use a cheap USB card reader instead of a direct cable connection.
Are you trying to transfer files like music and photos, or are you trying to flash the firmware to fix a software issue?
Nokia 130 Dual SIM | Specifications and User Reviews - Tech in Deep
Q1: Is the Nokia 130 RM-1035 USB driver compatible with Windows 11? Yes, but you must disable driver signature enforcement each time you use the flashing driver. For file transfer, the generic MTP driver works natively.
Q2: Can I use this driver on Mac or Linux? No. The official driver is only for Windows. On Linux, the phone may work as a mass storage device without extra drivers. On macOS, no official driver exists.
Q3: My phone is not detected at all. What should I check?
Q4: Does the driver work for the Nokia 130 Dual SIM? Yes, the Nokia 130 Dual SIM also has the model number RM-1035. The driver is identical.
Q5: Where can I find the original firmware files for flashing? Reputable sources: Ladin’s Blog (ladinblog.com) or NaviFirm (a firmware downloader tool). Always verify file hashes.
| Problem | Solution |
|---------|----------|
| “The INF file you selected does not support this method of installation” | You are trying to install via “Have Disk” but the driver is for a different OS version. Right-click INF → Install, or use the MSI installer. |
| Code 10 – Device cannot start | Uninstall the driver in Device Manager, disconnect phone, reboot, reinstall. |
| Phone only charges, no data connection | Your USB cable is charge-only. Replace with a data cable (test with another phone). |
| Driver installs but flashing tool fails | Try a different USB port (USB 2.0 is more stable than USB 3.0 for old Nokia). Also, disable driver signature enforcement (Windows 10/11): Settings → Recovery → Advanced Startup → Disable Driver Signature Enforcement. |
| Windows automatically overwrites driver | In Device Manager → Driver → Update driver → Browse → Let me pick → Select the specific Nokia driver. |
| Phone not entering flashing mode | For RM-1035, try: Remove battery → wait 10 sec → hold Volume Down + Power while inserting USB → release Power after 3 sec. Or use a dead USB method (short the capacitor – advanced only). |
Flashing means rewriting the phone’s internal software. You’d do this if the phone is stuck on a logo, has software bugs, or you want to change the region.
Required tools:
.mcusw, .ppm, .cnt)Basic flashing steps:
Technically, the Nokia 130 RM-1035 is powered by a MediaTek chipset. Consequently, the "Nokia" USB driver is, in many cases, a branded version of a standard MTK VCOM driver. This is vital information for technicians and advanced users. If the official Nokia drivers fail, the universal MTK drivers often succeed, as they speak directly to the hardware layer of the phone's processor.