Nokia Rm-1035 Mtk Usb Driver 64 Bit Gsm Forum -best |top| May 2026

Installing the Nokia RM-1035 MTK USB driver on 64-bit Windows requires disabling driver signature enforcement via Startup Settings, as these older drivers are often unsigned. The driver must then be manually installed through Device Manager by selecting the specific .inf file while the device is in Preloader mode. For a visual walkthrough of this process, watch this YouTube guide Install MTK (MediaTek Drivers) Windows 10 64 bit & 32 bit

Phase 1: Disable Driver Signature Enforcement (Mandatory)

  1. Click Start, hold Shift, and click Restart.
  2. Go to Troubleshoot > Advanced Options > Startup Settings > Restart.
  3. Press F7 (or 7) to select "Disable driver signature enforcement".
  4. Your PC will boot into a test mode.

🔁 Step 4: Verify Installation

In Device Manager, under Ports (COM & LPT), you should see:

MediaTek USB Port (COM3)

or

USB VCOM Port (COMx)

Now the driver is ready for SP Flash Tool or WriteIMEI tools.

📂 Step 3: Install MTK USB Driver (Manual Method)

  1. Extract the driver ZIP to a folder (e.g., C:\MTK_Driver) Nokia Rm-1035 Mtk Usb Driver 64 Bit Gsm Forum -BEST

  2. Turn off your Nokia RM-1035 completely

  3. Connect the phone to PC via USB while holding Volume Up (or Volume Down – varies by tool)

  4. Open Device Manager (Win + X → M)

  5. Look for:

    • Unknown Device or
    • MTK USB Port (with yellow exclamation) or
    • PreLoader USB VCOM (with error)

  6. Right-click → Update driver → Browse my computer → Let me pick

  7. Click Have Disk → Browse to extracted folder → Select mtk_usb_com.inf (or usb2ser.inf)

  8. Choose MediaTek USB Port (or MTK USB VCOM) from list

  9. Ignore warning → Install

4. Installation Challenges (The Review)

If you download this driver based on the search query, here is the reality of using it:

  • Pros:

    • Essential for Flashing: If you are using tools like SP Flash Tool or Nokia Best Tool to unbrick a RM-1035, this driver is mandatory.
    • Stability: Once installed correctly, the connection is stable for read/write operations.

  • Cons (The "Gotchas"):

    • Installation Difficulty: Installing MTK VCOM drivers on modern Windows (8/10/11) 64-bit systems is not plug-and-play. It requires disabling "Driver Signature Enforcement" via the Command Prompt or Advanced Startup options.
    • Device Manager Confusion: The device often shows up as "MediaTek PreLoader USB VCOM Port" rather than "Nokia RM-1035," confusing inexperienced users.

Step-by-Step Installation Guide for Windows 11/10 (64-bit)

Note: Windows 11 strictly requires driver signatures. You must temporarily disable this. Installing the Nokia RM-1035 MTK USB driver on

Nokia RM-1035 MTK USB Driver (64-bit) — Guide & Troubleshooting