Introduction
The Nokia RM-1035 is a popular mobile phone model that uses the MediaTek (MTK) chipset. To connect your Nokia RM-1035 to a computer and perform tasks such as flashing firmware, unlocking, or transferring files, you need to install the correct USB driver. In this guide, we will walk you through the process of installing the Nokia RM-1035 MTK USB driver 64-bit.
Requirements
Download MTK USB Driver 64-bit
You can download the MTK USB driver 64-bit from the following GSM forum link:
https://www.gsmtoto.com/2019/04/mediatek-usb-driver-64-bit.html
or
https://forum.gsmarena.com/showthread.php?t=421553
Installation Steps
C:\MTK_Driver.DPInst.exe file. This will launch the Driver Package Installer.Verify the Installation
Troubleshooting
If you encounter any issues during the installation process, try the following:
DPInst.exe file and select Properties > Compatibility).Conclusion
In this guide, we have walked you through the process of installing the Nokia RM-1035 MTK USB driver 64-bit. By following these steps, you should be able to successfully connect your Nokia RM-1035 to a computer and perform various tasks such as flashing firmware or transferring files. If you encounter any issues, refer to the troubleshooting section or seek help from a qualified technician.
Connecting a Nokia 130 (RM-1035) to a modern 64-bit Windows computer often presents a challenge because the phone uses an older MediaTek (MTK) chipset. To perform tasks like flashing stock firmware, removing a passcode, or repairing software issues, you must install the specific Nokia RM-1035 MTK USB Driver.
This guide provides the necessary resources and step-by-step instructions to get your device recognized on Windows 10 or 11 (64-bit). 1. Where to Find the Driver (GSM Forum Links)
The GSM community has maintained specialized drivers for these older "Nokia MTK" feature phones for years. The following links are frequently cited on the GSM-Forum (GSMHosting) :
Direct Driver Link: You can find the specific MTK USB Serial Port Drivers for Nokia on AndroidFileHost.
Community Discussions: For troubleshooting specific to the RM-1035 model, check the Need Nokia 130 USB Driver thread on GSM-Forum.
Alternative Source: GSMXTeam provides a comprehensive Nokia USB Driver package that includes MTK and HMD connectivity drivers.
2. Critical Requirement: Disable Driver Signature Enforcement nokia rm1035 mtk usb driver 64 bit gsm forum link
On Windows 10 and 11 (64-bit), the system will automatically block these drivers because they lack a modern digital signature. You must disable this before installation: Go to Settings > Update & Security > Recovery. Under "Advanced startup," click Restart now.
Choose Troubleshoot > Advanced options > Startup Settings > Restart.
After the reboot, press 7 or F7 to "Disable driver signature enforcement". 3. Step-by-Step Installation Guide
Once signature enforcement is disabled, follow these steps to manually install the driver through Device Manager:
Extract the files: Unzip the downloaded driver package to your desktop.
Open Device Manager: Right-click the Windows icon and select Device Manager.
Add Legacy Hardware: Click on your PC name at the top, go to Action > Add legacy hardware.
Manual Selection: Choose "Install the hardware that I manually select from a list" and click Next.
Locate Driver: Select Show All Devices > Have Disk. Browse to the extracted folder and select the .inf file corresponding to the 64-bit (x64) version.
Confirm Installation: If a red warning box appears saying "Windows can't verify the publisher," click Install this driver software anyway. 4. Verifying the Connection To ensure the driver is working for flashing: Introduction The Nokia RM-1035 is a popular mobile
Open Device Manager and expand the Ports (COM & LPT) section.
Power off your Nokia RM-1035, hold the "OK" or navigation button, and connect the USB cable.
You should see MediaTek USB Port or MTK USB Serial Port appear briefly.
Note: The port may disappear and reappear; this is normal behavior for MTK devices in "Preloader" or "Flash" mode.
Are you planning to use a specific tool like Infinity-Box BEST or SP Flash Tool to flash your Nokia RM-1035?
Here’s a step-by-step guide for finding and installing the Nokia RM-1035 (Nokia X2 Dual SIM) MTK USB driver on a 64-bit Windows PC, including the typical source from GSM Forum links.
install.bat → Run as Administrator.The inclusion of "64 bit" in the search query is the source of the friction.
When the Nokia RM-1035 was released, Windows 7 was king, and 64-bit computing was gaining ground but wasn't the absolute standard for budget repair laptops. The drivers shipped by Nokia or the generic MediaTek VCOM drivers were often unsigned or 32-bit exclusive.
Fast forward to today. A technician attempting to flash this phone is likely using Windows 10 or Windows 11. These operating systems enforce Driver Signature Enforcement. They will violently reject the old, unsigned 32-bit drivers that worked perfectly on a Windows XP machine in 2015.
This creates a crisis: The hardware is old, the software architecture is new, and the bridge between them (the driver) is broken. The user cannot simply plug and play. They must find a "hacked" or modified driver that has been re-packaged for 64-bit architecture, or they must learn how to disable Windows' security features to force an old driver to load. Nokia RM-1035 mobile phone Computer running Windows 10
This means the driver works, but your firmware is incompatible. Download the correct RM1035 stock ROM (search “RM1035 firmware GSM Forum”).