The Pinnacle Systems GmbH BigBen 51016499-1.2B Go to product viewer dialog for this item.
is a legacy PCI Video Capture Card designed to digitize analog video signals for editing. It is often associated with the Pinnacle MovieBox 510 or MovieBoard series. Key Hardware Features Interface: Uses a standard PCI compatible port.
Input Ports: Typically features Composite RCA and S-Video inputs for analog sources like VHS players and camcorders.
Digital Connectivity: Includes a 6-pin FireWire-400 (IEEE 1394) port for capturing digital video (DV) from camcorders.
Broad Compatibility: Some versions also offer a breakout cable or connection for versatile signal routing. Pinnacle Systems Gmbh Bigben 51016499 1.2b Driver //TOP
Pinnacle Systems GmbH Bigben 51016499 1.2b is a legacy PCI video capture card
used primarily for digitizing analog video. Because this hardware is discontinued, installing it on modern operating systems like Windows 10 or 11 requires specific manual steps, as official support has transitioned to Corel/Pinnacle's newer "Dazzle" line. 1. Identify Your Device
Before installing, confirm the hardware is correctly seated in a PCI slot. The "Bigben" 51016499 series often refers to internal capture cards that were part of the Studio MovieBoard or Studio 700 series. BigBen-51016499-1.2B Interface: PCI (Internal) Primary Function: Analog video capture (Composite/S-Video) 2. Locate and Download Drivers
Official drivers for legacy Pinnacle hardware are often archived on the Pinnacle Support Updates page or provided by community mirrors. Pinnacle Studio Official Hardware Driver Page: Pinnacle maintains a Legacy Capture Devices
list where 64-bit drivers (Version 14.0.0.166 or similar) can sometimes be found for newer Windows versions. Compatibility:
If a dedicated driver for "Bigben" is unavailable, drivers for the Pinnacle 510-USB Studio 700-PCI
often use similar chipsets (like Conexant) and may work as substitutes. LinuxTV.org 3. Driver Installation Procedure Pinnacle Systems - Software Updates
How to Install Drivers for the Pinnacle Systems Bigben 51016499 1.2B pinnacle systems gmbh bigben 51016499 1 2b driver install
Finding the right drivers for legacy hardware like the Pinnacle Systems GmbH Bigben 51016499 1.2B (often associated with Dazzle video capture cards or specific OEM internal tuners) can be a challenge. Since these components are no longer in active production, modern operating systems like Windows 10 or 11 won't always recognize them automatically.
Here is a straightforward guide to getting your hardware up and running. 1. Identify Your Hardware
The string "51016499 1.2B" is a specific part number used by Pinnacle Systems (now owned by Corel). This board is typically a Dazzle Digital Video Creator or a Pinnacle PCTV card.
Before installing, ensure the card is firmly seated in your PCI slot (for internal cards) or plugged into a high-speed USB port (for external units). 2. Locate the Correct Driver
Because Pinnacle has changed ownership, the original support pages are often offline. To find the driver, you have three reliable options:
Pinnacle/Corel Support: Visit the official Pinnacle Systems Support page and search for "Dazzle" or "PCTV" drivers. The Hardware ID Method: Open Device Manager. Right-click the "Unknown Device" and select Properties.
Go to the Details tab and select Hardware Ids from the dropdown.
Copy the VEN_xxxx&DEV_xxxx code and search for it on a reputable driver archive like DriverGuide or Microsoft Update Catalog.
Legacy Archives: Look for "Pinnacle PCTV Driver 5.x" or "Dazzle DVC 100" driver packages, as these are the most common matches for this part number. 3. Installation Steps Once you have the .zip or .exe file, follow these steps:
Disable Driver Signature Enforcement: If you are on Windows 10 or 11, these old drivers aren't "signed." You may need to restart your PC in "Disable Driver Signature Enforcement" mode (found under Advanced Startup settings) to allow the installation.
Run as Administrator: Right-click the installer and select Run as Administrator.
Compatibility Mode: If the installer fails, right-click the file, go to Properties > Compatibility, and set it to Windows 7 or Windows XP (Service Pack 3). Manual Update: If you only have the .inf files: In Device Manager, right-click the device > Update driver. Select Browse my computer for drivers. The Pinnacle Systems GmbH BigBen 51016499-1
Point the search to the folder containing your downloaded driver files. 4. Verification
After the restart, check Device Manager under Sound, video and game controllers. The device should now be listed by name (e.g., "Pinnacle PCTV" or "Dazzle Video Capture") without a yellow exclamation mark. Troubleshooting Tips
No Audio: Legacy Pinnacle cards often require a "Loopback" cable connected to your motherboard’s "Line In" port.
Software Choice: Old Pinnacle hardware works best with Pinnacle Studio or lightweight alternatives like AMCap or OBS Studio (though OBS may require a 32-bit bridge for very old drivers).
Pinnacle Systems GmbH BigBen 51016499 1.2b is a legacy PCI video capture card, often referred to as the Pinnacle 510-USB or part of the MovieBox Deluxe series in its different form factors. Driver Installation Guide Preparation : Before installing, ensure the capture hardware is disconnected
or the PCI card is properly seated in its slot with the computer turned off. Download the Driver Official legacy drivers are available on the Pinnacle Hardware Driver Page
, which hosts the final versions released for these devices. Windows 10/11 (64-bit)
, users often use the driver for the "Pinnacle 510-USB" or "710-USB," as these share similar internal hardware. The
driver version is widely cited as compatible with modern 64-bit systems. Manual Installation Run the downloaded driver file connecting the hardware.
Follow the on-screen prompts. Once the installation finishes, restart your PC.
Plug in the device (or boot with the card installed). Windows should automatically associate the pre-installed driver with the hardware. Verification Device Manager Check under Sound, video and game controllers
The device should appear as "Pinnacle 510-USB" (or similar) without any yellow exclamation marks. Corel Knowledge Base Important Compatibility Notes 64-Bit Systems & RAM Why Standard Driver Installation Fails When you plug
: A known issue exists where these legacy cards (specifically the 500/700 series) may cause crashes on 64-bit systems if the computer has more than 2GB of RAM Camera Privacy
: In Windows 10/11, you must allow desktop apps to access your "Camera" in the Windows Privacy Settings
for capture software like VirtualDub or Pinnacle Studio to "see" the device. Capture Software
: For best results on modern Windows, use lightweight capture tools like VirtualDub instead of the original heavy legacy software. The Digital FAQ
It sounds like you’re looking for a driver installation guide for a specific piece of hardware, likely a Bigben interactive controller (model number 51016499 — probably a PC/PS3/PS4 wired controller) that is also labeled with Pinnacle Systems GmbH (often associated with game controllers or video editing hardware in the past).
However, you added " — story at the end, so I’ll give you a short factual story/explanation of what this product likely is, followed by the driver installation steps.
When you plug the device in, Windows recognizes the USB Vendor ID (VID) and Product ID (PID). In this case, the hardware reports "Pinnacle Systems GmbH," but Windows cannot map it to a modern driver package. Common error states include:
This happens because:
Installing the Pinnacle Systems GmbH BigBen 51016499 1 2B driver is a rite of passage for retro-PC enthusiasts. By disabling signature enforcement and manually pointing Windows to the correct .inf file, you can bypass Microsoft's security lockdown and give this legacy hardware a second life.
Remember: The driver itself is not magical. The real value is in pairing it with the right software (SmartDVB) and the right signal source (SD DVB-T). If you followed this guide correctly, your "Unknown device" should now be a functioning TV tuner.
Need further help?
Search the Pinnacle Systems Users Group on Reddit or visit the VideoHelp.com forums. Post your exact Hardware ID (USB\VID_2304&PID_0222&REV_1.2B) for targeted assistance.
Disclaimer: Pinnacle Systems GmbH and BigBen are trademarks of their respective owners. This guide is for educational purposes to support legacy hardware.
If Windows does not find a driver, you must use compatibility mode.
Setup.exe file inside the extracted folder..inf file and install the "Pinnacle PCTV..." driver.Before downloading anything, you must confirm that the device you have matches the driver. The string 1 2B often indicates a hardware revision.