Pq Grit Kit 2 Repack -

The Verdict: Texture Over Trends

The PQ Grit Kit 2 is not your standard "808s and trap snares" pack. It is a specialized tool designed for producers who feel their beats are too clean or sterile. If you are looking to add dust, vinyl crackle, and aggressive texture to your drums, this is a strong contender for your library.

Overall Rating: 8/10

4. Apply Fresh Grease – The Critical Step

• Apply a consistent, moderate layer of PQ #2 grease around the Grit cartridge body.
• Work the grease into the grooves and seal areas.
• Do not overpack — excess grease can hydrolock the fork. A thin, even coating is all it needs.

3. Repacking Procedure

1. Disassembly – Opened main hopper and grit metering section following PQ manual (Section 4.2).
2. Cleaning – Removed residual grit; vacuumed and wiped internal surfaces. Inspected for rust or damage – none found.
3. Filtration Check – Cleaned inlet screen and replaced filter element (PN: PQ-FILT-2).
4. Refill – Repacked with 80-mesh garnet abrasive (total 25 kg / 55 lbs) to factory fill line.
5. Seal Replacement – Installed new lid gasket and two metering valve O-rings.
6. Reassembly & Testing – Torqued fasteners to 12 Nm; ran dry cycle for 30 sec; no leaks or irregular feed.

Part 7: Sourcing Your Repack Materials

To perform a successful PQ Grit Kit 2 repack, you need a reliable supply chain. Here are the top three sources for bulk abrasive and seal kits: pq grit kit 2 repack

1. Missouri Cobalt / Abrasives Distributors (Midwest) – Best for garnet and aluminum oxide in 50 lb bags.
2. Grainger Industrial Supply – Stock replacement gaskets (Norton OEM parts) for next-day delivery.
3. BlastOne International – Offers screened, recycled media specifically graded for PQ systems.

Pro Tip: Negotiate a "repack contract" with your local abrasive distributor. They will send a technician with a truck-mounted vacuum and repack your PQ unit on-site for a flat fee ($150-$250), including media. This outsources the mess and the risk. The Verdict: Texture Over Trends The PQ Grit

Why Would Anyone Look for a Repack?

• Cost Efficiency: Repacks can be 15–25% cheaper than factory-sealed PQ bags.
• Custom Quantities: Need 75 lbs, not 2,500 lbs? A repack provider can accommodate.
• Job Site Accessibility: Original kits are heavy. Repacks into handled pails or tear-away plastic bags improve mobility.
• Urgency: If the original kit is backordered, a repack from bulk inventory gets you working today.

Tips for best results

• Store repacks in a cool, dry place and reseal opened pouches to prevent contamination or moisture ingress.
• Use a small fine-mesh sieve if you suspect lumps or foreign particles.
• Maintain the applicator: clean filters and nozzles regularly to avoid clogging from reused media.
• Keep a log of grit grades used for different tasks so you can reproduce results.

How to use a repack (general steps)

1. Prepare a clean, well-lit workspace and wear appropriate PPE (gloves, eye protection, dust mask if dry grit).
2. Follow the included instructions: open the repack pouch carefully and, using the provided funnel or a clean scoop, transfer material into the PQ Grit Kit 2 reservoir or cartridge.
3. If the system requires mixing with a carrier or adhesive, measure per the manufacturer’s ratio and mix thoroughly to avoid clumping.
4. Reassemble the applicator, run a short test on scrap material to confirm flow and finish.
5. Adjust pressure or application technique as needed; keep extra repack pouches sealed and stored dry.