Qidi X-pro Manual Info
QIDI X-Pro User Manual
Version 1.0 | © QIDI Technology
Step-by-Step Assembly Guide
- Remove the Foam & Check the Gantry: The manual warns that the X-axis gantry is locked with zip ties during shipping. Do not power on until these are cut.
- Install the Filament Spool Holder: Unlike side-mount printers, the X-Pro uses a top-mounted rear spool holder. The manual diagrams the exact routing path to avoid friction.
- Leveling the Build Plate (The "Paper Method"):
- The manual recommends a standard A4 paper (0.1mm thickness).
- Critical detail: The X-Pro requires dynamic leveling. You must level the bed while it is heated to your printing temperature (60°C for PLA, 100°C for ABS), because thermal expansion changes the gap.
- The Z-Offset Calibration: This is the most skipped step. The manual dedicates a full page to adjusting the Z-offset via the touchscreen (Settings > Calibration > Z Offset). A negative value moves the nozzle closer to the bed.
Conclusion
The QIDI X-Pro manual is your starting point, but mastering this machine requires hands-on tweaking. By understanding the manual leveling process, utilizing the custom Cura profiles, and keeping up with basic rod lubrication, your X-Pro will be a dual-color printing powerhouse. qidi x-pro manual
Have you found a specific setting in the QIDI manual that works wonders? Drop a comment below and let the community know! QIDI X-Pro User Manual
Version 1
Key Slicer Settings for X-Pro
| Material | Nozzle Temp | Bed Temp | Chamber | Fan |
|----------|-------------|----------|---------|-----|
| PLA | 200-210°C | 50-60°C | Off | 100% |
| ABS | 240-250°C | 90-100°C | 40-50°C | 0-20% |
| PETG | 230-240°C | 70-80°C | 30°C | 30-50% |
| TPU | 210-230°C | 40-50°C | Off | 0% | Remove the Foam & Check the Gantry: The
1. Safety Warnings
- Hot Parts: Nozzle (up to 300°C) and heated bed (up to 100°C). Do not touch during operation.
- Moving Parts: Keep hands away from belts, pulleys, and lead screws.
- Ventilation: Print in a well-ventilated area, especially with ABS, PC, or Nylon.
- Fire Safety: Do not leave unattended for prints >12 hours. Keep a smoke detector nearby.
Chapter 3: Dual Extruder Calibration (The "Must-Read" Section)
This is where most users throw their hands up. The QIDI X-Pro manual refers to this as "Offset Calibration." Because the two nozzles are fixed side-by-side, the printer needs to know exactly how far apart they are in X and Y space.