The R-Link 2 software version 9.0.35.50x (specifically 9.0.35.501 or 9.0.35.506) is a firmware update for Renault’s R-Link 2 multimedia systems. It was primarily released to improve system stability, fix known bugs, and enhance smartphone integration features like Android Auto and Apple CarPlay. Key Technical Details Release Date: Roughly April 2021.
Preceded By: Versions 7.x, 8.x, and earlier 9.0.34.x builds. Primary Improvements: Enhanced compatibility with newer smartphone OS versions. Improved system responsiveness and interface fluidness.
Fixes for Bluetooth connectivity issues and microphone recognition. Installation & Update Process
You can update your system through the official Renault Easy Connect website or the R-Link 2 Toolbox.
Check Eligibility: Visit the Renault Easy Connect Upgrade Page and enter your VIN to see if this version is available for your vehicle.
Prepare Hardware: Use a high-quality USB stick (FAT32 formatted) rather than an SD card for R-Link 2 updates.
Download & Sync: Use the R-Link 2 Toolbox on your computer to download the update onto the USB drive.
In-Car Update: Start your engine and plug the USB into your vehicle. Follow the on-screen prompts; do not turn off the engine or remove the USB until the process is 100% complete. Critical Considerations
Boot Version: For a successful update to Version 9, it is highly recommended to have a Boot Version of 5615 or higher. Users with lower boot versions (like 5607) have reported occasional issues where configurations vanish or the hands-free microphone stops working.
Factory Reset: After the update, you may need to perform a factory reset to ensure all settings (like sound profiles and navigation preferences) align with the new firmware.
neue R-Link2-Softwareversion 9.0.35.50x - Renault Talisman Forum
R-Link 2 software version 9.0.35.50x is a critical update for Renault multimedia systems, primarily designed to improve stability and modernize smartphone integration features like full-screen display for Apple CarPlay and Android Auto. Key Features & Improvements Full-Screen Projection R-link 2-software Version 9.0.35.50x
: Unlike earlier versions (3.3 and 7.0) where CarPlay and Android Auto were limited to half-screen, version 9.0 supports full-screen mode System Stability
: This version resolves common performance issues and enhances general system responsiveness. Map Compatibility
: It is a prerequisite for installing the latest high-resolution 3D map updates. Installation Best Practices Updating your system can be done via the Renault Easy Connect portal using your 17-digit VIN. Use the Correct Hardware USB stick (8GB to 32GB) formatted to . Do not use SD cards for this specific software update. Sequential Updating
: If your current version is significantly older (e.g., version 7.0), it is recommended to update to 8.0 first before jumping to 9.0 to avoid system errors.
: Keep the engine running throughout the 15–20 minute installation process. Turning off the car during the update can "brick" the unit. Disconnect Bluetooth
: Before starting, disconnect any paired phones to prevent interruptions during the data transfer. New R-LINK 2 Software upgrade installation guide
This is a technical briefing / analytical piece regarding the software version 9.0.35.50x for the R-Link 2 infotainment system, used in various Renault, Dacia, and Alpine vehicles (late 2015–2022).
This piece is based on aggregated technical service bulletins, user forum diagnostics (Planète Renault, R-Link Unofficial Dev Group), and Renault’s official release notes for version 9.0.35.50x, dated June 2023.
The R-Link 2 software version 9.0.35.50x is a major system update for Renault's multimedia infotainment system. This version is primarily designed to improve system stability, fix known bugs from earlier 9.x releases, and enhance smartphone integration. Key Features & Improvements
System Stability: Addresses random reboots and freezing issues reported in versions like 9.0.34.61x.
Navigation Updates: Integrates smoother map rendering and updated point-of-interest data. The R-Link 2 software version 9
Connectivity: Enhanced Bluetooth pairing reliability and faster initialization for Apple CarPlay and Android Auto.
Visual Enhancements: Minor UI adjustments for better readability on both portrait and landscape screen configurations. Installation & Availability
Factory-Installed: This version is standard on many Renault vehicles produced from late 2019 onwards (e.g., Espace, Megane 4, Talisman).
Dealer Updates: In many regions, this update is officially performed by Renault service centers via the CAN Clip diagnostic tool, especially for vehicles upgrading from older v2.x or v3.x versions.
USB Update: Some users can download the update package through the Renault Easy Connect portal by entering their VIN, then installing it via a USB stick. ⚠️ Important Considerations
Hardware Compatibility: Official updates to Version 9 are typically tied to specific VINs; older hardware (Gen 1.1) may require unofficial patches to run Version 9 effectively.
Risk of Brick: Attempting to force an incompatible version or interrupting the update process can permanently disable the unit (anti-theft lock).
Backup: Always ensure your engine is running during the update to prevent the system from entering "Battery Save" mode.
💡 Pro Tip: If your Renault Connect store shows no updates but you are experiencing bugs, visit a dealership to check for "Actis" solutions related to 9.0.35.50x.
If you tell me your vehicle model and current software version, I can: Confirm if 9.0.35.50x is the official path for your car. Provide a step-by-step guide for USB installation.
neue R-Link2-Softwareversion 9.0.35.50x - Renault Megane 4 Forum No further feature updates for R-Link 2 beyond 9
The R-Link 2 software version 9.0.35.50x (most commonly found as 9.0.35.501) represents one of the final and most stable evolutionary peaks for Renault’s legacy infotainment system. Released around April 2021, this version is primarily targeted at vehicles like the Megane 4, Talisman, and Kadjar that were either delivered with Version 9 or officially upgraded to it by a dealership. What Makes Version 9.0.35.50x Interesting?
Unlike earlier updates that focused on basic connectivity, this version refines the user experience and addresses several lingering "bugs" from the 9.0.34 series.
Performance and Fluidity: Users frequently report a "felt" increase in system speed and menu responsiveness compared to older builds.
Safety and Navigation Integration: This version enhances how speed camera locations and mobile radar alerts are displayed. These alerts are now more consistently mirrored across the main screen, the instrument cluster, and the Head-Up Display (HUD).
Refined Settings: For vehicles with advanced driver-assistance systems (ADAS), the acoustic radar warning settings are now more intuitively grouped within the driving assistance menus.
CarPlay & Android Auto: While Version 7 first introduced full-screen smartphone replication, Version 9.0.35.50x provides the most stable environment for these features, reducing common crashes or "black screen" errors. The "Unofficial" Path
One of the most interesting aspects of this specific version is its life in the enthusiast community. Many owners of older Renaults (originally running Version 2.x or 3.x) use this version as the "holy grail" for manual upgrades. By patching this software, users can unlock features their cars weren't technically supposed to have, such as full-screen Apple CarPlay and Android Auto. Critical Installation Tips
If you are planning to move to this version, keep the following in mind:
Hardware Check: Official updates to Version 9 are generally tied to your VIN via the Renault Easy Connect Store. If your car was never "blessed" for Version 9 by Renault, the official portal won't show it.
USB Over SD: Always use a high-quality USB stick formatted to FAT32 for the update. Avoid using SD cards, as they are prone to read errors during the critical flashing process.
Persistence is Key: It is common for the installation to take up to 10–15 minutes. Ensure your engine is running to prevent the car's "Battery Save Mode" from killing the power mid-update, which can brick the unit. Update for R-LINK 2 - Renault Connect
Update for R-LINK 2 * Check if updates are available for my vehicle. * Download the update onto a USB stick. (Do not use SD card.) renault-connect.renault.com
9) — Обновление мультимедийной системы R-LINK 2
USB Drive/
├── licence/
├── maps/
├── sw/
└── updatefile.txt