Resetter Printer Canon G2010 !full!
The Canon PIXMA G2010 is a high-volume refillable ink tank printer favored for its low running costs. However, like many inkjet devices, it can eventually encounter system blocks—most notably the 5B00 error, which signals that the internal waste ink absorber is theoretically full. This guide explains how to use a "resetter" method to clear these errors and restore functionality. Why Does Your Canon G2010 Need a Reset?
Printers track ink usage during cleaning cycles. When the internal counter reaches a certain limit, the printer assumes the waste ink sponge is saturated and halts all printing to prevent overflow. Common symptoms include: Error Code 5B00 or P07 appearing on your computer. The Alarm and ON lamps flashing alternately 7 times.
The printer becoming completely non-responsive to print commands. Step 1: Entering Service Mode
Before you can reset the counter, you must put the printer into Service Mode. This state allows the printer to accept administrative commands.
Turn off the printer, but keep it plugged into the power source. Press and hold the Stop button. While holding Stop, press and hold the Power button. Release the Stop button (keep holding the Power button).
Press the Stop button 5 times (some older guides suggest 6 times; 5 is standard for G2010). Release the Power button.
Wait for the green power light to stop flashing and remain steady. The LCD screen should be blank or show a specific service indicator. Inkjet - PIXMA G2010 - Canon Philippines resetter printer canon g2010
RRP ₱ 7,495.00. Refillable Ink Tank All-In-One for High Volume Printing. Designed for high volume printing at low running cost. Canon Philippines
Title: The Mechanics of Artificial Scarcity: A Technical and Socio-Economic Analysis of the Canon PIXMA G2010 Resetter Ecosystem
Abstract
This paper explores the technical architecture and economic implications of the "resetter" mechanism for the Canon PIXMA G2010 printer. As part of Canon’s G-Series (MegaTank) line, the G2010 utilizes a sophisticated Ink Absorber Counter (IAC) to monitor waste ink accumulation. When this software counter reaches a predefined threshold, the printer ceases operation, demanding service. This paper deconstructs the firmware logic behind the IAC, analyzes the "Service Tool" software used for resetting, and examines the tension between Digital Rights Management (DM)-driven obsolescence and the Right to Repair movement. It argues that the G2010 resetter ecosystem represents a critical case study in the weaponization of firmware to enforce manufacturer-controlled lifecycles.
Part 1: Understanding the Canon G2010 "Service Error"
Before diving into the resetter tool, you need to understand why your Canon G2010 stops working.
Step-by-Step Reset Procedure
Follow these steps methodically. Rushing or missing a step can cause the reset to fail. The Canon PIXMA G2010 is a high-volume refillable
Step 1: Enter Service Mode The printer must be placed into a special diagnostic mode. Turn off the printer. Then, while holding down the Stop/Reset button (the triangle inside a circle), press and hold the Power button. Keep holding the Power button, but release the Stop/Reset button. While still holding Power, press the Stop/Reset button twice (or five times, depending on the firmware—two times is standard). Then, release the Power button. The green power light will flash, then remain steady. The printer is now in Service Mode.
Step 2: Connect and Launch the Service Tool With the printer in Service Mode, open the downloaded service tool on your Windows computer. You may need to run it as an administrator (right-click the file and select "Run as administrator").
Step 3: Select the Correct USB Port In the service tool interface, click the "USB Port" button or dropdown menu to select your Canon G2010 from the list. If the printer does not appear, ensure the USB cable is securely connected and the printer is still in Service Mode.
Step 4: Reset the Waste Ink Counter In the service tool, locate the section labeled "Waste Ink Pad Counter" or "Absorber Counter." Click the "Main" checkbox. Some tools also have a "Platen" or "Borderless" checkbox—if available, select both. Then, click the "Set" or "Reset" button. A progress bar may appear, and after a few seconds, you should see a confirmation message such as "Set Successfully."
Step 5: Power Off and Test Close the service tool. Turn the printer off using the Power button. Wait 10 seconds, then turn the printer back on. The error lights should disappear, and the printer should function normally. Run a single nozzle check or print a test page to confirm operation.
1. Introduction
The Canon PIXMA G2010 represents the "MegaTank" revolution in inkjet printing, moving away from expensive, low-yield cartridges to integrated, refillable ink tanks. While this innovation solved the "ink scam" of cartridge-based printing, it introduced a new technical bottleneck: the Waste Ink Absorber. Part 1: Understanding the Canon G2010 "Service Error"
Unlike cartridge printers where the waste pad could be replaced or bypassed with relative ease, the G2010’s "service required" error is a hard stop enforced by firmware. The "resetter"—typically a piece of software known as Canon Service Tool—acts as a cryptographic key to bypass this stop. This paper defines the G2010 resetter not merely as a utility, but as a socio-technical bridge between consumer usage and manufacturer control.
Q3: How many times can I reset my Canon G2010?
Typically 2–3 times. After the third or fourth reset, the physical pads will be so saturated that any reset will cause immediate leakage. At that point, you must replace the pads.
Step 2: Open Service Tool on PC
- Connect printer to PC via USB.
- Run Service Tool v.4720 (as Administrator – right-click → Run as Administrator).
- In the tool:
- Select USB PORT (auto-detects).
- Click “Set Destination” – choose your region (e.g., Europe/Asia/USA).
Wrong destination can cause errors. - Then click “EEPROM Clear” (or “Waste Ink Counter Clear”).
- A pop-up will ask for confirmation – click Yes.
- The tool will reset the counter.
The Ultimate Guide to the Resetter Printer Canon G2010: Why, When, and How to Reset Your MegaTank
If you own a Canon PIXMA G2010, you’ve invested in one of the most popular “MegaTank” inkjet printers on the market. Known for its low-cost refillable ink tanks and high page yield, the G2010 is a workhorse for home offices and small businesses. However, like all printers in this series, it has a hidden obstacle: waste ink pad counter.
When that counter fills up, your printer locks itself down with error codes like "5B00" or "5B01". This is where a resetter printer Canon G2010 becomes essential.
In this comprehensive guide, we will explain what a resetter is, why you need it, how to find a safe one, and provide a step-by-step walkthrough to bring your Canon G2010 back to life.
4.2 Versioning Wars
Canon actively attempts to patch vulnerabilities that allow Service Tools to function. Newer printer models (and newer firmware updates) often require updated versions of the Service Tool (e.g., Service Tool v3600 or v4905). This creates a cat-and-mouse dynamic similar to the jailbreaking of smartphones. Third-party developers must reverse-engineer the handshake protocols to create working resetters for new firmware iterations.
3. The Resetter Ecosystem: Methods and Mechanics
Resetting the G2010 involves manipulating the printer’s EEPROM (Electrically Erasable Programmable Read-Only Memory). Two primary methodologies exist for this process.
