Rs Hx Prc 6020 Technical Data Access

RS HX PRC-6020 is an HF man-pack radio unit that is part of the Tadiran HF-6000 series

developed by Elbit Systems. It is designed for reliable and secure voice and data communications in modern tactical environments. Elbit Systems UK Ltd Core Technical Specifications Frequency Range: 1.5000 to 29.9999 MHz. 2,850,000 channels with 10 Hz spacing. Modulation Modes: USB, LSB, and AM. Output Power: Adjustable settings of 5W, 10W, and 20W. Receiver Sensitivity: -110 dBm (with 10 dB SINAD). Data Rate: Supports bit rates up to 4800 bit/sec. Operational Modes & Functions Frequency Management:

Includes fixed operating frequency (FOF), dual-frequency simplex (DFS), and frequency-hopping (ECCM) modes. Link Establishment: Automatic Link Establishment (ALE)

per MIL-STD-188-141A and proprietary "AutoCall" for fast connection setups (2.5 to 4.5 seconds). rs hx prc 6020 technical data

Optional COMSEC for digital encryption of voice and data. Frequency-hopping techniques are used to ensure reliable operation in jammed environments. Information Types:

Capable of transmitting voice, telegraph, encoded "FLASH" messages (up to 1000 preformatted messages), and digital data. Elbit Systems UK Ltd Hardware & Physical Attributes Internal Components:

Uses Xilinx FPGA (XC3042A) and specific logic circuitry for TX/RX path processing. Power Source: Typically powered by a compact, non-rechargeable 12V 15Ah Lithium Sulphur Dioxide (LiSO2) battery pack Environmental Durability: RS HX PRC-6020 is an HF man-pack radio

Built to MIL-STD-810 E/F standards with an operating temperature range of -40°C to +65°C. Interface:

Features a menu-driven graphic display, a keypad for mode control (including LITE, CLR, and SEC keys), and connectors for dipole, whip, or wire antennas. peripheral accessories compatible with this radio set? 12V, 15Ah(PRC) - BEL

Based on the alphanumeric string provided (RS HX PRC 6020), this appears to be a reference to a specialized industrial component, most likely a Heater Exchanger (HX) unit associated with PRC (Programmable Refrigeration/Cooling) systems, or a specific model of Heat Exchanger manufactured by a company using "RS" (such as RS Components or a similar industrial OEM) with the model series PRC 6020. Pairing / Commissioning (typical)

Because "PRC 6020" is a common industrial model designation for heat dissipation and "HX" is the standard engineering abbreviation for Heat Exchanger, this write-up focuses on the technical data surrounding a Heavy-Duty Industrial Heat Exchanger Unit typical of this nomenclature.

Below is a technical write-up based on the typical specifications and engineering data for an RS HX PRC 6020 class component.

Pairing / Commissioning (typical)

  1. Enter receiver programming mode: press and hold PROGRAM button (or open programming jumper).
  2. Press transmitter pairing button until receiver LED blinks; release.
  3. Receiver confirms with steady LED or beep.
  4. Test each channel: press transmitter buttons and observe outputs/LEDs.
  5. Configure output modes (latching vs momentary) using DIP switches or software.

2.4 Encryption & Security

| Parameter | Specification | |-----------|----------------| | Encryption Algorithms | AES-256, ARC4-40, ARC4-256 | | Key Management | Over-the-air rekeying (OTAR) via KMF | | Authentication | FIPS 140-2 validated module | | Secure Voice Modes | Clear, encrypted (individual or group) |

2.6 Environmental & Physical

| Parameter | Specification | |-----------|----------------| | Water & Dust Ingress | IP68 (submersible up to 2m for 4 hours) | | MIL-STD-810G Compliance | Method 501.6 (High Temp), 502.6 (Low Temp), 514.7 (Vibration), 516.7 (Shock) | | Operating Temperature | -30°C to +65°C (-22°F to +149°F) | | Storage Temperature | -40°C to +85°C (-40°F to +185°F) | | Humidity | 95% RH non-condensing |

B. Construction Materials

Wiring & Connections

  1. Power: observe polarity for DC; use proper fuse (e.g., 1 A slow-blow for 12–24 V DC).
  2. Antenna: connect to SMA/BNC; keep vertical and clear of metal for best range.
  3. Outputs:
    • Relay: connect load between supply and relay contact; never exceed rated current.
    • Open-collector: require pull-up to logic voltage; observe voltage limits.
  4. Inputs (if present): typically accept dry contact or 0–30 V; use debounce if mechanical.
  5. Grounding: connect chassis earth to earth terminal for safety and EMI reduction.

2.5 GPS / Location Services

| Parameter | Specification | |-----------|----------------| | GNSS Support | GPS L1, GLONASS L1 | | Time To First Fix (TTFF) | Cold: < 35 sec; Hot: < 3 sec | | Horizontal Accuracy | < 2.5 meters (typical) | | Tracking Sensitivity | -160 dBm | | Data Output | NMEA-0183, TAIP |

Back
Top