To set up the Samsung Flip Printing Software, you must install the Samsung Flip Printing Software Setup.exe on a PC that will act as a print server. This software allows your Samsung Flip interactive display to send print jobs to a physical printer connected to that PC. 1. Requirements and Preparation
Before downloading, ensure your PC meets the following hardware and system requirements:
Operating System: Windows 10 is recommended, though versions back to OS X 10.10 (Yosemite) are supported for Mac users.
Hardware: Minimum Dual Core 2.5 GHz CPU (Quad Core recommended), 4 GB RAM, and 1 GB HDD space.
System State: The PC must have at least 50% CPU and RAM occupancy rate free to function properly as a print server.
Power Settings: You must disable power-saving mode. In Windows 10, go to Control Panel > Hardware and Sound > Power Options > Change plan settings, and set "Put the computer to sleep" to Never. 2. Download and Installation Steps
The official installation file, Samsung Flip Printing Software Setup.exe, is available through Samsung's business and support portals.
Download the File: Locate the setup file on the Samsung Display Solutions website or the main Samsung Support page.
Run with Privileges: Right-click the .exe file and select Run as Administrator. Setup Wizard: Select your preferred language. Accept the Terms of Use. Choose a destination folder and click Next. SSL Port Configuration: Flip 1.0: You must use Port 443 for SSL. Flip 2.0+: You can assign any port as an SSL port.
Completion: The process takes about 5 minutes. Click Close once finished. 3. Connecting the Flip to the Print Server
After the software is installed on your PC, you must link it to your Samsung Flip display:
Network: Both the PC and the Samsung Flip must be on the same network.
Flip Settings: On the Flip display, navigate to ≡ (Menu) > SETTINGS > Connect > Advanced Settings > Print Server.
Clock Sync: Ensure the time is accurate on the Flip under ≡ > SETTINGS > System > Time > Clock Set for the connection to validate. Limitations to Note
No Virtual Printers: The Flip does not support "Print to PDF," OneNote, or fax devices; it only supports actual physical paper printers. samsung flip printing software setupexe download top
Paper Size: Currently, only A4 paper size is supported for Flip printing. Samsung Flip Printing Software
The fluorescent lights of the IT office hummed a low, mocking tune as Elias stared at the error message. It was 4:44 PM on a Friday. His boss, a man who treated paper like a sacred relic, needed the "Quarterly Vision" printed—not on standard A4, but via the massive Samsung Flip digital whiteboard in the lobby.
“It’s a simple driver, Elias,” his boss had barked. “Just find the setup file.” Elias typed the words into the search bar like a prayer: samsung flip printing software setupexe download top
The results were a digital graveyard of broken links and generic support pages. He clicked a link that promised a "Top-Rated Universal Driver," only to be met with a flickering pop-up of a dancing hamster. His mouse hovered over a suspicious blue button labeled Download_Final_v2_REAL.exe
"Don't do it," he whispered to himself. "That's how the printers gain sentience."
Suddenly, a chat window flickered in the corner of his screen. No username. Just a prompt:
Looking for the Flip? Check the 'Business Support' vault, not the 'Consumer' junk.
Elias pivoted. He bypassed the flashy ads and dove into the sterile, grey archives of the enterprise portal. There, buried under three layers of "Software & Firmware" dropdowns, sat the holy grail: Samsung_Flip_Printing_Service_Setup.exe
As the progress bar crawled toward 100%, the office went silent. He hit 'Print.' In the lobby, the massive screen whirred. The rollers turned. A crisp, warm page slid out, smelling of ozone and victory.
To download and set up the Samsung Flip Printing Software, follow these official steps to turn your PC into a print server for your Flip display: 1. Download the Setup File
The official installer, Samsung Flip Printing Software Setup.exe, is available through Samsung's business and support portals.
Official Portals: You can find the latest version on Samsung Display Solutions or the Samsung Download Center.
Alternative Support: If you have trouble locating the specific file, search for your Flip model code (e.g., WM55R) in the Samsung Business Support FAQ. 2. PC Requirements & Prep
OS Compatibility: Supports Windows 7 (SP1) and Windows 10 (32/64-bit). To set up the Samsung Flip Printing Software
Power Settings: You must disable power-saving mode. Set "Put the computer to sleep" to Never in your PC's Power Options to ensure the Flip can always find the print server.
Network: Both the PC and the Samsung Flip must be on the same wired or wireless network. 3. Installation Steps
Run Samsung Flip Printing Software Setup.exe with administrator privileges.
Follow the prompts to agree to the terms and choose a destination folder.
Enter SSL Port: During setup, you will be asked for an SSL port. For Flip 1.0, use port 443. For Flip 2.0, you can use any available SSL port. Finish the installation and restart your PC if prompted. 4. Connect Flip to the PC
On your Samsung Flip display, navigate to:Menu (≡) > Settings > Connect > Advanced Settings > Print ServerEnter the IP address of the PC where you just installed the software to complete the link.
Note: The Flip only supports physical printers for A4 paper; virtual printers (like "Print to PDF") and scanners are not supported.
The Samsung Flip Printing Software is a dedicated utility designed to transform your computer into a print server, enabling seamless wireless printing directly from a Samsung Flip digital whiteboard. While "Samsung Flip" can also refer to the Galaxy Z Flip smartphone series, this specific setup.exe software is intended for the interactive display. How to Download and Install the Software
To set up the printing environment for your Samsung Flip display, follow these steps:
Download the Official Installer: The software can be downloaded directly from the Samsung Display Solutions website or the general Samsung Support portal. Look for the "Samsung Flip Printing Software" section under the display's support page.
Run the Setup: Locate the downloaded file, typically named Samsung Flip Printing Software Setup.exe for Windows or .dmg for Mac. Run it with administrator privileges to ensure all background services are correctly configured.
SSL Port Configuration: During the installation, you will be prompted to enter an SSL port. For Flip 1.0, you must use Port 443. For Flip 2.0 or newer, you can assign any available port.
System Requirements: Your computer must have at least 50% available CPU and RAM to function reliably as a print server. Additionally, disable power-saving modes on the host PC to prevent connection drops during use. Key Considerations for Printing
Paper Size Limitation: The Samsung Flip is optimized for professional document sharing and currently only supports A4-size paper for printing. Unlocking the Full Potential Once the software is
Server Status: You can verify if your print server is active by using the Diagnostics Tool found in the installation folder (typically /Applications/NetPrinting/ on Mac or within the Program Files on Windows).
Device Compatibility: The software does not support virtual printers (like "Print to PDF"), scanners, or fax machines; it requires a physical printer connected to the same network as the PC running the software. How can I Print from my Flip2? | Samsung Gulf
To set up printing for your Samsung Flip interactive display, you must download the Samsung Flip Printing Software (filename: Samsung Flip Printing Software Setup.exe ) on a Windows PC that will act as your print server. Download and Installation
The official software is available through Samsung's business and display solutions portals. Official Download Sources: Samsung Display Solutions Download Center
– Search for your specific model (e.g., WM55R, WM65B) under the "Software" tab. Samsung Business Support – For US-based product downloads. Installation Steps: Samsung Flip Printing Software Setup.exe on your PC.
Select your preferred language and follow the on-screen prompts. During setup, enter a for Flip 1.0; Flip 2.0 and later support any port). Complete the installation and ensure the PC is on the same network as the Samsung Flip. samsung.com Configuring the Flip Display
Once the software is running on your PC, you must point the Flip to that PC: Navigate to Advanced Settings Print Server IP Address of the PC where you installed the software. (Time) on the Flip via to ensure the connection is verified. samsung.com Key Requirements & Limitations Supported Media:
The software only supports printing on actual paper; virtual printers (PDF, OneNote, etc.) are not supported Paper Size: Currently, only size is supported for Flip printing. PC Resources: The PC acting as the print server should have at least 50% available CPU and RAM for stable performance. samsung.com IP address of your print server PC to complete the connection? How can I Print from my Flip2? | Samsung Gulf
Once the software is installed, the "top" utility of the Samsung Flip is unlocked. Users can seamlessly switch between drawing on the Flip and controlling the presentation from their laptop. They can save annotated documents directly to their PC folders and utilize the printing functions to share hard copies of brainstorming sessions with stakeholders who were not present in the room.
support.hp.com.WM55R, WM65R).SamsungFlip_Win_Driver_Setup.exe (file size approx. 45-60 MB).setup.exe)Always verify digital signature:
Right-click Setup.exe → Properties → Digital Signatures → Select Samsung → Details → "This digital signature is OK".
Run as Administrator (required for driver installation).
Temporarily disable antivirus only if it blocks known-good Samsung driver (false positive is rare since 2020).
Use Windows Sandbox or a test VM if uncertain.
Do not run Setup.exe if file was downloaded via a pop-up ad or "Download Button" on a non-Samsung site.