Sony E6833 Lock Remove Ftf [exclusive] 【Original • 2024】

To remove the lock screen from a Sony Xperia Z5 Premium Dual (E6833) using an FTF file, you must flash the device's firmware using the Xperia Flashtool. This process will perform a factory reset, erasing all user data on the device. Prerequisites Battery: Ensure your device is charged to at least 50%.

Drivers: Install the Sony flash drivers from the Flashtool drivers folder on your PC.

Flashtool: Download and install the latest version of Androxyde Flashtool. 1. Download the E6833 FTF Firmware

Open Flashtool and click the XperiaFirm icon (the "X" icon).

Locate Xperia Z5 Premium Dual in the left sidebar and select the E6833 model. sony e6833 lock remove ftf

Select a firmware version (e.g., 32.1.A.1.163) for your region.

Click the software number and select Download. Once finished, close XperiaFirm; Flashtool will automatically bundle the file into an FTF. 2. Configure Flashtool for Lock Removal

In Flashtool, click the Lightning icon and select Flash Mode.

Choose the E6833 FTF you just downloaded from the firmware list. To remove the lock screen from a Sony

Crucial: Under the Wipe pane on the right, ensure USERDATA and CACHE are checked. This ensures the lock screen code is deleted. Click Flash. 3. Connect in Flash Mode Turn off your Xperia E6833 completely. Press and hold the Volume Down button.

While holding the button, connect the phone to your PC via a USB cable.

Release the button once Flashtool detects the device and the log shows "Device connected in flash mode". 4. Finalizing the Process

The flashing progress bar will begin. Do not disconnect the device during this time. Factory reset (when you have access to Settings)

Once the log shows "Flashing finished," unplug the phone and power it on.

The first boot may take several minutes as it sets up the fresh system.


Factory reset (when you have access to Settings)

  1. Settings → System → Reset → Factory data reset → Confirm.
  2. Alternatively, from recovery: Power off → Hold Volume Up + Power (or Volume Down + Power depending on model) to enter recovery → choose wipe data/factory reset.

Step 6: First Boot After Lock Removal

  1. Disconnect the USB cable.
  2. Press and hold the Power button until the phone vibrates.
  3. The first boot will take a long time (up to 10 minutes) because it is rebuilding the cache and userdata partition.
  4. The device will boot directly to the Android Setup Wizard.
  5. There will be no PIN, password, or Google FRP lock (provided you wiped userdata).

Step 4: If You Also Need to Remove FRP (Google Account Lock)

Flashing with wipe USERDATA does not remove FRP on Android 6.0+. After flashing, you still need to bypass the Google account verification.

Simplest way after FTF flash:


What You Need

  1. Xperia Companion – installed on PC (official Sony software for drivers & backup)
  2. Flashtool (by Androxyde) – the standard tool for flashing Sony FTFs
  3. Sony E6833 FTF file – official firmware image
  4. USB debugging – not required if device is locked/bricked, but drivers matter

Step 2: Download the Correct Sony E6833 FTF File

This is the most sensitive part. You cannot use a generic “lock remover” tool. You need the exact stock ROM.

🔓 Sony Xperia Z5 Premium (E6833): The Lost Art of Lock Removal via FTF

In the golden era of Sony Xperia (circa 2015–2017), the Xperia Z5 Premium (E6833) was a beast: 4K display, waterproof body, and a mirror-chrome back. Fast forward to today, many of these phones are locked — forgotten Google accounts, pattern-locked devices, or second-hand units with no credentials. Enter the FTF firmware method — a powerful, offline way to reset the device without official unlocking tools.